Indoor Air (OHS Monitoring) Equipment Available In Aruba
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
For indoor applications, the MerPAS® sampler is deployed without the protective jar housing regardless of Hg air concentration since the sample does not need protection from the elements. Mounting stands may be purchased from Tekran if needed. Sample time is determined by monitoring goals and expected air Hg levels. The yellow body ...
-
Manufactured by Purelogic Labsbased in INDIA
SQUAIR monitor is a smart indoor air quality monitoring device which can detect particulate matters and gases parameters. It detects PM10, PM2.5, CO, CO2, O3, NO2, SO2, TVOC, HCHO, noise, light, temperature & humidity. The monitor comes with two product variants like SQUAIR Lite & SQUAIR Pro which have few different sensors inside the ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DFRV-20L-BL-5Li is a lightweight, small footprint, brushless DC motor powered air sampling system operable from (1) on-board 4500 MAH NiMH batteries (2) line power or (3) an external 12 VDC source such as a 12 VDC battery ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-30L-BL-AC is a lightweight, small footprint, brushless DC motor powered air sampling system operable from (1) line power or (2) an external 12VDC source such as solar ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-30L-BL-Li is a lightweight, small footprint, brushless DC motor powered air sampling system operable from (1) line power, an on-board Li-ion battery or (2) an external 12VDC source such as solar ...
-
Manufactured by Environmental Monitoring Systems, Inc.(ems)based in USA
Allergenco MK-3 is a versatile, portable, and ideal sampler for collection of single or sequential indoor air quality ...
-
Manufactured by Entech Instruments, Inc.based in USA
Two indoor air HDS™ sampling versions are available from Entech, 1) MiniCan™ and Bottle-Vac Samplers (detailed below) that feature special HDS™ MicroValves that are optimized for standard sampling event durations – the diffusion zone exists inside of the fitting. 2) Controlled helium / air exchange with an external HDS™ diffusion zone ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
and passes through a funnel (diffuser) to the human nose. Each olfactory tester or examiner gets an identical odour sample with a standardised volume flow and constant presentation time. Additionally, the PureSniff XL can be used for indoor air sampling and is fully compliant with the requirements of the ISO 16000-28 standard as well as the VDI 4302 ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
Olfasense is reseller of Kynar and Tedlar sampling bags made from PVDF, offering sizes from 0.5 L to 1000 L. Tedlar and Kynar bags are commonly used for indoor air sampling, waste sites, storage tanks, stack sampling, soil gas sampling, gas blending, calibration test standards, and many other gas sampling needs. Tedlar bags are also ...
-
Manufactured by CEL Scientific Corporationbased in USA
of compounds. Bags of Tedlar® film can be used for indoor air sampling, hazardous waste sites, leaking underground storage tanks, stack sampling, soil gas sampling, gas blending, calibration test standards, and most other gas sampling ...
-
Manufactured by Samplebags.eubased in NETHERLANDS
The Tedlar gas sampling bags are made of DuPont’s 2mil Tedlar® PVF film. Tedlar® PVF film is tough, durable, and considered chemically inert to a wide range of compounds. Bags of Tedlar film can be used for indoor air sampling, hazardous waste sites, leaking underground storage tanks, stack sampling, soil gas sampling, gas ...
-
Manufactured by Xonteck Incbased in USA
X-Timer is designed to automatically start and stop event for unattended, long-term field sampling. The unit is featured with rechargeable battery lasting up to one-charged 240 hours ...
-
Manufactured by Shinhan Techbased in SOUTH KOREA
Applications: Photochemical monitoring, Atmospheric environmental analysis, Chemical industrial complex ...
-
Manufactured by SKCbased in USA
The SKC Deployable Cartidge Sampler (DCS) System offers cost-effective ambient air sampling of PAHs, PCBs, pesticides, and associate particulates. With its fully programmable Li-Ion powered Leland Legacy Sample Pump and specially designed sampling head that holds a media cartridge, the DCS is ideal for fenceline monitoring, near-roadway ...
-
Manufactured by Radiation Detection Systemsbased in AUSTRALIA
Passive Radon Monitor (PRM): The principal of RDS developed the methodology for the radon activity concentration monitoring in the soil, air and in water by solid state nuclear track detectors. RDS provides the radon concentration in air monitoring service by nuclear track detectors to the uranium mining industry and caves in ...
-
Manufactured by TSI Incorporatedbased in USA
This small, portable, battery-operated unit is lightweight and easy to use. Volumetric flowrate is displayed continuously so adjustments to pump flow can be made in real-time. This primary calibrator is accurate to +/- 2% of reading. The Primary Calibrator 4146 has a range of 0.01 to 20 liters per minute ...
-
Manufactured by TSI Incorporatedbased in USA
The Primary Calibrator 4046 has a range of 2.5 to 300 liters per minute (L/min). This small, portable, battery-operated unit is lightweight and easy to use. Volumetric flowrate is displayed continuously so adjustments to pump flow can be made in real-time. This primary calibrator is accurate to +/- 2% of ...
-
Manufactured by Arjay Engineeringbased in CANADA
On-line monitoring for ppm concentrations of petroleum oils in effluent and produced water. The HydroSense 4410 is the engineered combination of three unique designs by Arjay. The sensing chamber contributes a continuous controlled water sample while the optical sensor package hovers above the passing stream. The Arjay controller then monitors the multiple signals to provide a reliable ppm ...
-
Manufactured by Spectra Scientific, Inc.based in CANADA
The GilAir Plus is a personal air sampling pump that is compatible with all personal air sampling methods with flow ranges between 20 and 5,100 cc/min. The GilAir Plus can perform both high-flow constant pressure and constant flow (450-5,100 cc/min) and low-flow constant pressure and constant flow (20-499 cc/min) with a single pump ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you