Only show results in Connecticut? Ok

Oil Leaks services for Health and Safety

  • Pollution Liability Insurance Services

    Spills. Leaks. Explosions. Pollution incidents are a significant risk that can result in serious harm not only to your operations, but to public health and safety as well as to the environment. Environmental pollution risks are complex and new hazards can emerge unexpectedly.

    By Chubb Group of Insurance Companies based in Warren, NEW JERSEY (USA). from Property & Casualty Service line

  • Facilities and Groundwater Remediation Services

    All facilities consume water during washing, processing, diluting and cleaning operations. They also produce very high volumes of stormwater or runoff water. Advances in storage and supply chain management has increased the number of facilities, warehouses and related process industries around the world. The water generated in these facilities ...

    By MYCELX Technologies Corporation based in Duluth, GEORGIA (US) (USA).

  • Alatas - Crane Inspection Services

    ALATAS provides 5-yearly crane and lifting gear inspections, load testing, supply of water bags, and cargo gear endorsements, all out of one hand. This translates into direct cost savings for owners, who no longer need to engage and pay separate contractors for crane inspection, load test provision etc. ALATAS, as an Enterprise of Competence with ...

    By Alatas UK Ltd based in Low Moor, UNITED KINGDOM.

  • Leak Detection and Repair (LDAR) Program

    Western Environmental has been implementing Leak Detection and Repair Programs (LDAR) for the oil and gas industry since 1996. In 2006 WEST developed an electronic program at the request of the ethanol industry that utilizes barcoded tags with a plant specific PDA to electronically inventory components subject to a facility's LDAR program. The PDA ...

    By Western Environmental Services and Testing, Inc. based in Casper, WYOMING (USA).

  • Manufacturing Services

    Manufacturing plants often require significant quantities of water for production and equipment cleaning. They consume the second largest fraction of fresh water after the power & utilities industry. Irrespective of their size, plants are required to meet the stringent discharge norms and limits set by local and environmental agencies as well ...

    By MYCELX Technologies Corporation based in Duluth, GEORGIA (US) (USA).

  • SMHI - Dispersion Calculations and Risk Assessments Services

    SMHI has many years of experience of emission calculations which can provide a good basis for decisions regarding the dimensioning or risk analysis of different types of emissions in the air and water, for example.

    By SMHI International Consulting Services based in Norrköping, SWEDEN. from Environment Service line

  • Hose Pressure Testing Services

    Smithers Rapra performs a variety of hose pressure testing from a number of specifications including automotive, marine, and industrial. Pressure tests include impulse, static, burst, etc. High and low pressure impulse: Smithers can impulse hoses using air (low pressure), water, radiator coolant, oil, brake fluid, and transmission fluid. Burst: ...

    By Smithers Rapra based in Akron, OHIO (USA). from Hose Cycle Testing Service line

  • Lifewater - Maintenance Services

    LDT 360 drill rig maintenance requires only a standard set tools and a grease gun.

    By Lifewater Drilling Technology based in San Luis Obispo, CALIFORNIA (USA).

  • Oil & Chemical Clean Up Services

    Spills do happen, and it can be the most simplest things that causes them! An example below of a fuel tank valve not being shut off completely, the 2ltr drip tray was not sufficent and overfilled.

    By Edge Enviro Services Ltd based in Minster, UNITED KINGDOM.

  • Field Services

    Lamson, Gardner Denver, HSi, Atlas Copco, Howden, Siemens, HV-TURBO, Turblex Single Stage and Multistage Turbo Blower Field Service and Preventative Maintenance. Lone Star experience technicians can not only offer field service but complete preventative maintenance programs as well, including complete troubleshooting and repair capabilities of the ...

    By Lone Star Blower, Inc. based in Houston, TEXAS (USA). from Aftermarket Service line

  • Installation of Zero Leak Seals in Valves for Hydrocarbon service

    Zero Leak Valve Seal is braided in a round cross section from 100% pure, unsintered PTFE tapes. This is a dual layer product. To reach near perfect impermeability for both fluids and gases, Zero Leak Valve Seal gets additionally wrapped with a layer of pure PTFE tapes. It has excellent resistance to chemicals and high temperatures.

    By Siddharth Enterprises based in Mumbai, INDIA.

  • Tank Bund Cleaning Services

    Even when a spill has been contained within a bund this still requires proper cleanup as if left it could cause pollution at a later date. Picture on left is a lorry bund which contained an oil leak from a lorry, this was left for a week before being clean up

    By Edge Enviro Services Ltd based in Minster, UNITED KINGDOM. from Other Services Service line

  • Oil Field Construction Services

    Even before Superior Tank Company., Inc (STCI) began manufacturing and erecting bolted steel storage tanks and welded ground storage tanks for oil storage, our key staff already had decades of experience in the oil field. With over 50 years of experience in the oil industry, STCI and our senior managers are experts in the design, manufacturing, ...

    By Superior Tank Co., Inc. based in Rancho Cucamonga, CALIFORNIA (USA).

  • Oil Spill Solutions

    SAF-RON INTERNATIONAL provides solutions for all your oil spill needs. Our technology is proven efficient, effective and cost conscious. In open environment and facility spills Saf-Ron products are superior in preparing, responding and remediating spilled hydrocarbon fluids.

    By Saf-Ron International based in Atlanta, GEORGIA (US) (USA).

  • Preventative Maintenance

    Cleanliness Always keep the machine clean, especially around the operation control system. Remove dust, dirt or any materials on/near the machine. Inspection of Pipeline Damage Inspect pipeline where material enters into baling chamber for damage or obstructions. Oil Leak Detection Excessive oil on the cylinder rod is a sign that the seals should ...

    By Ningbo Sinobaler Machinery Company Limited based in Yinzhou District, CHINA.

  • Oil Tank Removal & Closure

    An underground storage tank (UST) system can be a liability for a number of reasons. The oil tank could become corroded and leak into the surrounding soils, leading to an expensive cleanup. The presence of a UST on a property, whether it is leaking or not, can stall or even kill, a potential real estate transaction. Being proactive and converting ...

    By Active Environmental Technologies, Inc. based in Mt. Holly, NEW JERSEY (USA).

  • Maintenance and Repairs Services

    Hydraulic installations, maintenance and repairs. Pipes, flushing and onsite servicing; can operate anywhere in the world. Pump and drainage checks. Oil purity checks. Adjustment of proportional valves. Commissioning. Checking for leaks. Tank cleaning. Checking gas levels in accumulators.

    By Group Glual based in Azpeitia, SPAIN.

  • Tank Cleaning

    Cleaning tanks and containers invariably requires care and competency. This is why we deploy only trained specialist staff and state-of-the-art technology, ensuring professional and proper tank cleaning for ultimate results. From professional cleaning to temporary storage of any remaining oil, from the disposal of residues to the complete ...

    By MÜNZER Bioindustrie GmbH based in Sinabelkirchen, AUSTRIA.

  • Consulting Services

    Considerable hands-on and application-specific experience with vacuum equipment that covers the vacuum spectrum from 'rough' to 'ultra high', from 100 Torr to 1e-11 Torr. Vacuum equipment knowledge encompasses mechanical pumps, Roots boosters, oil diffusion pumps, turbomolecular pumps, ion pumps, cryogenic pumps, titanium sublimation pumps with ...

    By Redragon Oil & Gas Systems International Inc. based in Ontario, ONTARIO (CANADA).

  • Low Maintenance

    Routine maintenance is one of the most important, time consuming, and most expensive tasks that every gas mower owner is plagued with time and time again throughout the service life of the mower.  With Mean Green Mowers, there is very little routine maintenance. There is no internal cumbustion engine, so no spark plugs to clean/change, no ...

    By Mean Green Products, LLC. based in Hamilton, OHIO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you