Oil Spill Monitoring Downloads

  • Premium

    OCMA-500/550 Oil Content Analyzer Brochure

    OCMA-500 to measure concentration of oil contained in drainage and environmental water. After injecting the water sample and solvent, all you have to do is press the start button, and the system will automatically conduct the monitoring operation from oil extraction to sample measurement and draining. With no more troublesome operations like opening/closing the drainage valve, monitoring is ...


    By HORIBA Europe GmbH

  • Premium

    OCMA-500 - Oil Content Analyzer - Brochure

    Reduced environmental impact and running costs (20% cut in solvent consumption * ) Fully automated one-touch operation, from oil ex t The OCMA-500 Oil Content Analyzer has been redesigned for even better operability, maintaining its user-friendly features. After injecting the sample, all you have to do is press a button to get the monitoring operation done quickly, from oil extraction to sample ...


    By HORIBA Europe GmbH

  • Premium

    Model TD-107 5.0 - Oil Content Monitor Datasheet

    Fluorescence detection technology is resistant to interferences from turbid or dirty water that impact light scatter devices. Substances such as sediment and rust do not materially interfere with the detection of oil in water. Fluorescence detection ensures that the Oily Water Separator is not ‘fooled’ into staying in recirculation mode by false positives caused by silt and other ...

  • Premium

    Oil Water Interface Meter (Handheld and Standard) Operating Manual

    1. Instructions specific to hazardous area installations (Reference European ATEX Directive 94/9/EC, Annex II, 1.0.6.) The following instructions apply to equipment covered by certificate numbers Sira 04ATEX2366: The equipment may be located where flammable gases and vapours of group IIB may be present. The equipment is only certified for use in ambient temperatures in the range -20ºC to ...


    By Geotech

  • Premium

    Geotech Interface Meter Datasheet

    The ATEX certifi ed oil /water Interface Meter offers reliable, accurate and safe detection of fl oating non-aqueous phase liquids (LNAPL) and sinking dense non-aqueous phase liquids (DNAPL). The oil /water Interface Meter is extremely easy to use and is supplied with a carry bag to protect the ...


    By Geotech

  • Premium

    Arjay 2880-OWI Probe Mounted Oil/Water Interface Transmitter - User Manual

    Over 40 years of capacitance experience stands behind the 2880-OWI transmitter. The sensing probe continuously monitors the capacitance of the inserted probe. As the interface or emulsion layer (rag layer) crosses over the probe, a proportional 4-20 mA output is provided. Typical applications include oil water separators, oil/water knock-out tanks, treater trains and decanting ...


    By Arjay Engineering Ltd.

  • Premium

    White Paper - Extended Measurement Ranges for Testing Oil Content in Water and/or Soil with the InfraCal 2 Analyzers

    There are several options for InfraCal users who would like to measure from sub-ppm to percent levels of fats, oil and grease (FOG) or total petroleum hydrocarbons in water, drill cuttings or soil. The new InfraCal 2 has the capability of multiple calibrations for different concentration ranges while the standard InfraCal TOG/TPH Analyzers only hold one calibration. Listed below are the typical ...


    By Spectro Scientific

  • Premium

    InfraCal 2 - Measuring Oil In Water & Soil Analyzers Datasheet

    InfraCal 2 analyzers have become the petrochemical industry standard ensuring oil content levels in water, drill cuttngs or soil are below the regulated limit. These rugged, portable, low maintenance analyzers are often still in operation for more than 10 years in the corrosive environment of offshore oil rigs. The analysis procedure provides rapid results, taking less than 15 minutes and can be ...


    By Spectro Scientific

  • Premium

    Determination of Fat and Oil Content in Foodstuffs - Application Note

    Fat and oil content is an important measurement of nutritional value and product quality for many foodstuffs. In particular, this value is widely used to determine energy content and to calculate the proportion of other components in foods (e.g. carbohydrates). In addition, the fat and oil content may significantly affect the texture, perceived quality and flavour of products. Thus, accurate ...


    By Oxford Instruments plc

  • Premium

    Measurement of Oil Content in Dried Snack Food - Application Note

    Summary Up to 250 times faster than wet chemistry methods+ No hazardous solvents required; no hazardous waste produced Easiest, most reliable technique available; suitable for unskilled operators - simple, intuitive visual software Simple linear calibration; no chemometrics Insensitive to sample form and additives Not including sample conditioning time ...


    By Oxford Instruments plc

  • Premium

    Determination of Wax Content in Oils - Application Note

    Wax (paraffin) content is an important characteristic affecting the physical properties of petroleum crude oils, in particular their viscosity. Thus, measuring wax content has become a routine analytical requirement for product quality ...


    By Oxford Instruments plc

  • Premium

    Arjay 2880-OWI Probe Mounted Oil/Water Interface Transmitter - Brochure

    Over 40 years of capacitance experience stands behind the 2880-OWI transmitter. The sensing probe continuously monitors the capacitance of the inserted probe. As the interface or emulsion layer (rag layer) crosses over the probe, a proportional 4-20 mA output is provided. Typical applications include oil water separators, oil/water knock-out tanks, treater trains and decanting ...


    By Arjay Engineering Ltd.

  • Premium

    Model 2852-HCF - Floating Oil Spill Alarm User Manual

    Over 40 years of capacitance experience stands behind the 2852-HCF Oil Monitor. The unique floating sensor continuously monitors for the accumulation of oil at the water ...


    By Arjay Engineering Ltd.

  • Premium

    Model 2852-HCF - Floating Oil Spill Alarm Specification

    Sample Specification for Floating Oil Alarm (2852 HCF) The floating oil sensor shall be of a high frequency capacitance technology to monitor for the dielectric change between water and surface ...


    By Arjay Engineering Ltd.

  • Premium

    Arjay 2852-HCF Floating Oil Spill Alarm - Brochure

    Over 40 years of capacitance experience stands behind the 2852-HCF Oil Monitor. The unique floating sensor continuously monitors for the accumulation of oil at the water surface. ...


    By Arjay Engineering Ltd.

  • Premium

    Model 2880-OWI - Oil/Water Interface Transmitter - Manual

    Over 40 years of capacitance experience stands behind the 2880-OWI transmitter. The sensing probe continuously monitors the capacitance of the inserted probe. As the interface or emulsion layer (rag layer) crosses over the probe, a proportional 4-20 mA output is provided. Typical applications include oil water separators, oil/water knock-out tanks, treater trains and decanting ...


    By Arjay Engineering Ltd.

  • Premium

    Model 2880-OWI - Oil/Water Interface Transmitter - Brochure

    Over 40 years of capacitance experience stands behind the 2880-OWI transmitter. The sensing probe continuously monitors the capacitance of the inserted probe. As the interface or emulsion layer (rag layer) crosses over the probe, a proportional 4-20 mA output is provided. Typical applications include oil water separators, oil/water knock-out tanks, treater trains and decanting ...


    By Arjay Engineering Ltd.

  • Premium

    Measurement of Oil and Water in Seeds Application Brochrue

    SEEDSSEEDSMethodThe oil and water in seeds method involves differentiating the two analytes on the basis of their NMR relaxation times. The solid signal decays rapidly leaving a signal dependant on the oil and bound water only. Oil is then individually determined by using an NMR refocussing technique to measure the signal at a convenient time after the bound water has decayed. The water is ...


    By Oxford Instruments plc

  • Premium

    Determination of Oil in Wax Application Brochure

    waxAlthough wax was originally treated as a waste product by the oil refining industry, it is now widely used in manufacturing because of its specific mechanical and physical properties (flexibility, friction index, hardness coefficient, melting point etc.). The oil refining industry has responded by producing different types of wax with special characteristics (petrolatum, slack, crude paraffin, ...


    By Oxford Instruments plc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you