Only show results in Connecticut? Ok

Oil Spill Monitoring equipment for Health and Safety

  • Premium

    TDHI - Model TD-107 - Oil Content Monitor

    The TD-107 Oil Content Monitor is the most reliable way to to measure oil content in a typical ship’s oily waste holding tank, bilge, or oily water separator.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    FerroCheck - Model 2000 Series - Ferrous Metal Analyzer

    The FerroCheck 2000 Series of portable ferrous analyzers offer accuracy and convenience for total ferrous measurement of in-service lubricating oil and grease. Fast and easy to use samples are analyzed in less than 30 seconds. Small sample volumes of just 1.5 ml of oil or 0.75 ml of grease are needed to measure ferrous content in ...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA). from Battery Powered Oil Analyzer Product line

  • Premium

    TDHI - Clean-In-Place (CIP) System for Oil in Water Monitors

    Most oilfield produced waters and other oily waste waters have high fouling potential for optical sensors. High cost ultrasonic cleaning systems only address the local optical path and not the entire sample system. Our clean-in-place (CIP) system addresses the entire sample system in the same way that CIPs are used to clean heat exchangers and ...

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Model 4 Diameter - Oil Spill Sampling Net

    This new highly porous TFE-fluorocarbon polymer net, developed in conjunction with the U.S. Coast Guard, captures up to 10 times the volume of oil compared to traditional decanted samples, The extra volme collected from thin sheens allows for the presentation of chromatographic identification.

    By General Oceanics Inc. based in Miami, FLORIDA (USA). from Oil Sampling Product line

  • Premium

    Oil Spill Sample Jar Ring

    Oil Spill Sample Jar Ring. 2' nylon disposable.

    By General Oceanics Inc. based in Miami, FLORIDA (USA). from Oil Sampling Product line

  • Premium

    InfraCal 2 - Model TRANS-SP - Oil In Water/Soil Analyzer

    The InfraCal 2 TRANS-SP  is recommended for measuring oil in water, TPH in soil or FOG in wastewater concentration levels using the traditional EPA methods 413.2 and 418.1 or ASTM method D7066-04and Freon-113, hydrocarbon-free grade of perchloroethylene, AK-225, S-316 or other spectroscopic infrared transparent solvent as the ...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA). from Other Fluid Analyzers Product line

  • Premium

    General Oceanics - Oil Spill Sampling Kit (Uscg)

    This new sampling system developed in conjunction with the U.S. Coast Guard overcomes the problems of collection and transportation of thin oil sheen samples to the laboratory for identification. The system employs a simple TFE-fluorocarbon polymer net passed through the oil sheen to collect the sample. The net is then removed from the disposable ...

    By General Oceanics Inc. based in Miami, FLORIDA (USA). from Oil Sampling- Product line

  • Premium

    General Oceanics - Model 5080-KIT3 - Oil Spill Sampling Jar Kit

    This new sampling system developed in conjunction with the U.S. Coast Guard overcomes the problems of collection and transportation of thin oil sheen samples to the laboratory for identification. The system employs a simple TFE-fluorocarbon polymer net passed through the oil sheen to collect the sample. The net is then removed from the disposable ...

    By General Oceanics Inc. based in Miami, FLORIDA (USA). from Oil Sampling- Product line

  • Premium

    Oil Spill Sampling & Transport Kit

    This new sampling system developed in conjunction with the U.S. Coast Guard overcomes the problems of collection and transportation of thin oil sheen samples to the laboratory for identification.

    By General Oceanics Inc. based in Miami, FLORIDA (USA). from Oil Sampling- Product line

  • Premium

    Heron - Oil / Water Interface Meters

    Aquaread are pleased to offer a full range of oil / water interface meters from Heron. Below you can find a brief list of what we can offer, if you have any questions whilst we develop these pages a little further please head to the contact us page and drop us a line.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM. from Heron Water Meters Product line

  • Interface Probe

    The OWP oil/water interface probe is used to determine the thickness of hydrocarbons. It consists of a vibrating wire displacement sensor encased in a sealed body. The body contains a telescopic outer PVC pipe fitted with two flanges and an inner stainless steel rod. One end of the rod is attached to the flange while the other is connected to a ...

    By NVM Limited Ireland based in Drogheda, IRELAND. from Environmental Monitoring Product line

  • Stainless Steel Remote Optical Watcher (ROW)

    Remote Optical Watcher - ROW is an autonomous non-contact sensor that detects oil on water in real time. It uses oil’s natural fluorescence to detect anything from marine diesel to vegetable oil to jet fuel, and alerts you immediately. Highly accurate and easy to maintain, it finds oil spills early so you can respond before things get out of ...

    By Laser Diagnostic Instruments AS based in Tallinn, ESTONIA.

  • Koehler - Model K23050 - Electrometric Salt Determinator

    Conforms to ASTM D3230 test specifications. Measures salt content, conductance, and temperature of crude oil  samples, and pH measurements of aqueous samples. Portable for field or laboratory testing with up to 8 hours of continuous  operation from internal Ni-Cd rechargeable batteries.  18-bit analog-to-digital converter for high ...

    By Koehler Instrument Company Inc based in Holtsville, NEW YORK (USA). from General Testing Equipment Product line

  • Model OMD- 7 MKII - Industrial Monitors

    DECKMA HAMBURG GmbH are proud to announce the launch of an all new Oil-in-Water Monitor, the 'OMD-7 MKII Industrial Monitor', designed to measure the content of Free Oils, Suspended Solids and Turbidity in Water continuously and independently. This design represents the first all new Industrial Monitor capable of distinguishing between the ...

    By Deckma Hamburg GmbH based in Hamburg, GERMANY.

  • Interface Meter

    Interface Meter can be used in numerous applications including measuring oil and water levels in monitoring wells, detecting tank leakage and obtaining accurate measurements of water levels. When the Interface Meter is lowered down a well and contacts the product layer, a solid tone and green light alarm is activated on the reel. When the probe ...

    By Gabriel International Trade LLC based in Denver, COLORADO (USA). from Environmental - Oil and Water Product line

  • Remote Optical Watcher (ROW) ATEX

    Remote Optical Watcher - ROW is an autonomous non-contact sensor that detects oil on water in real time. It uses oil’s natural fluorescence to detect anything from marine diesel to vegetable oil to jet fuel, and alerts you immediately. Highly accurate and easy to maintain, it finds oil spills early so you can respond before things get out of ...

    By Laser Diagnostic Instruments AS based in Tallinn, ESTONIA.

  • OPTIMARE SLAR - Side-Looking Airborne Radar

    The OPTIMARE SLAR is a cloud-penetrating imaging X-band radar for day & night airborne maritime observation. The SLAR has a typical swath width between 60 and 80 kilometers and is used for mapping the sea surface with regard to oil spills, vessels, wakes and many more. The lightweight OPTIMARE SLAR with its outstanding performance and its ...

    By OPTIMARE Sensorsysteme GmbH & CO. KG based in Bremerhaven, GERMANY. from Airborne Systems Product line

  • EPE POSEIDON - Model FIT - Bilge Oil Water Separator

    POSEIDON FIT Bilge Oil Water Separator consists of two stages; the coalescer and the emulsion breaking unit. The coalescer works on a continuous mode, by passing the second stage, and only when the oil detection monitor detects at the effluent of the coalescer oil content higher than 4ppm, then the emulsion breaking unit begins its operation. ...

  • PreciWaterTest - High Accuracy Measurement Kit

    The GESERCO PreciWaterTest allows for accurate and cost-effective measurement of the water content in any little volatile liquids.

    By Geserco based in MERIGNAC, FRANCE. from Water Content - Water Test Kits Product line

  • Factair - Model F4501 - Safe-Air Tester for Breathing-Air Systems

    The F4501 Safe Air Tester is the latest generation of Factair’s market leading air quality testing instruments and enables breathing-air tests to be conducted easily and quickly. This ensures complete compliance with the relevant requirements of COSHH L5. Mounted within a tough impact and weather resistant PELI case the F4501 unit can be ...

    By Factair Limited based in Ipswich, UNITED KINGDOM. from Air Quality Testing Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you