Oil Spills Applications in Australasia

  • Premium

    Odors control for solid waste

    A solid solution for solid waste odors. All areas of solid waste handling are, by nature, odorous affairs. Municipal sludge, municipal solid waste, landfills, composting and co-composting facilities all generate odors that can be offensive to workers and the community at large. The process is a complex one, with multiple drops, collections, transfers and sortings of recyclable and non-recyclable material. Combustible materials are then incinerated for energy production.

    By OMI Industries (OMI) Distributor in Abbotsford, AUSTRALIA.

  • Premium

    Portable and fixed gas analysers for remediation and groundwater

    Contamination can arise from circumstances such as fuel spills and plant leaks. Geotech has developed a range of equipment to help you comply with each stage of the remediation process.

    By Geotechnical Instruments (UK) Ltd Distributor in AUSTRALIA.

  • Premium

    Oil in Water Analysis for Flowback or Produced Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that can be performed by non-technical personnel. The water is mixed with the extraction solvent, shaken, and then presented to the analyze for measurement. The same InfraCal TOG/TPH Analyzer can be used for TPH in soil if a spill or pond leak occurs to determine the contaminated area. The analyzer features: -Results in under 15 minutes -Detect levels as low as 10 ppm -Portable, rugged, lightweight, easy-to-use -Battery operable -Ideal for field or lab use

    By Spectro Scientific Distributor in Tuggerah, AUSTRALIA.

  • High performance separation system for lube oil industry

    Many lube oil recovery processes create aqueous and hydrocarbon emulsions that are difficult to separate by means of conventional liquid/liquid separations technology. Accomplishing the desired separation requires that these emulsified droplets be captured. Conventional coalescers are unable to provide the degree of brightness and clarity associated with good separation due to the inability to capture and remove the most penetrating droplets that indicate carry-over. Pentair Porous Media technologies have been developed to address the inherent deficiencies of the conventional coalescers.

    By Pentair Filtration Solutions, LLC Office in Dandenong South, AUSTRALIA.

  • Solutions for the equipment decontamination

    BioSolve Pinkwater is used for cleaning/decontaminating tools and equipment at remediation sites, in refineries, on drilling rigs, following spill cleanup, and in industrial maintenance operations. Generally applied with standard pressure washing equipment.  Most oil and tar build-up can be washed away on contact. For more severe contamination, use of a hot water system may yield better results.

    By The BioSolve Company Distributor in Cornulla, AUSTRALIA.

  • Solutions for the emergency spill clean-up

    BioSolve Pinkwater eliminates fire and explosion hazard when sprayed directly onto a fuel/oil spill. Aggressive agitation with a course stream reduces volatilization and causes LEL readings to immediately decline, possibly registering “0.” Application of Pinkwater also facilitates roadway cleanup and elimination of hazardous oil sheen.

    By The BioSolve Company Distributor in Cornulla, AUSTRALIA.

  • HAZMAT response for the Oils Spills Industry

    By Fast-ACT Distributor in Hemmant, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you