OSHA Regulations Articles

  • Beat the Heat: Occupational Exposure to Heat and Hot Environments

    With summer underway, now is the perfect time for organizations to examine their policies and procedures regarding employee heat exposure, especially in light of the recently published document from NIOSH titled, “Occupational Exposure to Heat and Hot Environments”, Publication Number 2016-106. What is the ...


    By Antea Group - USA

  • Read about Confined Space in Construction and Atmospheric Testing Right Here!

    In 1993, 29 CFR 1910.146 went into effect as the first federal legislation governing entry into permit-required confined spaces in general industry. Because some industries, such as the construction industry, were covered by specific Occupational Safety and Health Administration (OSHA) safety regulations, they were exempt from the confined space entry requirements of the general industry rule. ...


    By Argus-Hazco

  • It’s Time to Prepare for an OSHA PSM Inspection

    Companies who are required to comply with OSHA’s Process Safety Management standard (1910:119) should be on high alert now that inspectors are being encouraged to complete more time-consuming, complex investigations. The reason? OSHA’s new enforcement weighting ...


    By Intelex Technologies Inc.

  • Beyond the Bloodborne Pathogen Standard

    Are you considering the full range of applicable OSHA Standards for your healthcare facility? Healthcare facilities are a highly regulated industry and many hospitals and ambulatory care settings work hard to reach and maintain appropriate accreditation goals. Much focus is placed on patient safety and the myriad of other quality measures healthcare facilities are required to meet. ...


    By Antea Group - USA

  • Developing equipment specific lockout/tagout procedures – Case Study

    Challenge: Antea®Group was contracted by one of the world’s largest chemical manufacturing organizations to provide equipment-specific lockout / tagout procedures at their largest Research and Develop facility in North America. The overall objective of the project was to evaluate the worker risks during maintenance and repair operations associated with laboratory ...


    By Antea Group - USA

  • Process safety and risk management audits for a ceramics manufacturing facility – Case Study

    Challenge Antea Group was contracted by a large, advanced materials organization to provide a Process Safety Management and Risk Management Program compliance audit of a specialty ceramics manufacturing facility in New Hampshire. Processing at the facility is related to the crystalline growth of materials used in the semiconductor manufacturing industry. Processing at the facility ...


    By Antea Group - USA

  • Managing Temporary Worker Safety in the Construction Industry

    In recent months OSHA and NIOSH have begun cracking down on organizations for their historically lax treatment of temporary workers in regard to safety. The reasoning for this increased attention, along with subsequent stiff fines is twofold. According to Dave Michaels, OSHA’s Assistant Secretary of Labor, there are 23% more temporary workers in the job market than there were before the ...


    By Intelex Technologies Inc.

  • 9 Things Your Respiratory Protection Program Must Include

    Many think that getting a respirator fit test is all that is needed.  Unfortunately, it’s much more than that. The OSHA Respiratory Protection Standard 29 CFR 1910.134 has many requirements in addition to respirator fit testing. If respirators are worn by any employees, companies must have a written Respiratory Protection Program. The one exceptionis if the only respirators in use are ...


    By Atlantic Environmental, Inc.

  • 3E Company Gives Cabot Microelectronics Corporation the Power to Comply with Global Regulations

    Background Cabot Microelectronics Corporation (CMC) is a supplier of sophisticated polishing compounds and polishing pads used in the manufacture of advanced semiconductors and rigid disks--critical components that drive today‘s electronic systems from desktop and laptop computers, cellular phones and electronic games, to personal data assistants, telecommunication ...


    By 3E Company

  • IndustrySafe safety software case study

    Introduction IndustrySafe Safety Software is a web-based safety data management solution developed by TRA so organizations can track incidents, corrective actions, OSHA reporting, training, claims, inspections, hazards, behavioral based safety, and more. IndustrySafe clients include leaders in manufacturing, construction, government, and transportation. General ...

  • US GHS

    With the Selerant suite you can manage the different implementations of the GHS. In this newsletter we see, specifically, the US GHS. The US GHS in EuSHEET has been implemented ...


    By Selerant srl

  • Strategies to implement GHS - Bringing order out of potential chaos

    More than two years after the Globally Harmonized System for Classification and Labeling of Chemicals (GHS) Notice of Proposed Rule Making (NPRM) to revise the existing Hazard Communication Standard (HCS) was introduced, OSHA ...


    By 3E Company

  • How to deal with asbestos exposure in your workplace: advice for industrial workers

    At one point, more than 75 different industries exposed workers to asbestos. Even though these industries have been made safer by regulations from the National Institute for Occupational Health and Safety, many workers still come in contact with asbestos products that remain at their jobsites. Although most industrial employees face some form of asbestos exposure risks during their career, ...


    By Intelex Technologies Inc.

  • Managing compliance: Taking the heat out of fire code classification

    How are you managing the hazardous materials you use, store and produce in your facility? Do you have an accurate, up-to-date inventory of the hazardous materials and chemicals within your organization? And are all of those materials properly classified? More specifically, are these materials classified for fire code? Fire code classification long has been considered one of the more complex and ...


    By 3E Company

  • Managing compliance: Going beyond ‘Be Prepared’

    The recent earthquake and subsequent tsunami in Japan have prompted companies around the globe to re-examine their emergency response strategies. While some companies have comprehensive emergency response strategies in place, others just now are taking the steps necessary to review possible threats, analyze potential impacts and create expanded versions of their existing plans. If a company ...


    By 3E Company

  • OSHA updates PPE standards

    On February 15, 2011, the Occupational Safety and Health Administration (OSHA) issued a revised directive that provides enforcement guidance on determining whether employers have complied with OSHA's personal protective equipment (PPE) standards.  The Enforcement Guidance for Personal Protective Equipment in General Industry, CPL 02-01-050, is the latest ...


    By Bergeson & Campbell, P.C.

  • OSHA Updates PPE Standards

    On February 15, 2011, the Occupational Safety and Health Administration (OSHA) issued a revised directive that provides enforcement guidance on determining whether employers have complied with OSHA's personal protective equipment (PPE) standards.  The Enforcement Guidance for Personal Protective Equipment in General Industry, CPL ...


    By Acta Group

  • OSHA increases enforcement pressure

    Most in the EH&S community are aware of the increase in OSHA enforcement activity over the past five years. This has been particularly noticeable since the Obama administration took office in 2008. While this increase has been apparent, what has not been as clear are the reasons this is happening or the effect on worker safety. The Occupational Safety and Health Administration (OSHA), is ...


    By Trinity Consultants

  • Chemical Engineering Magazine Article: Chemical Lifecycle Management

    Chemicals in production and laboratory environments alike have three distinct lifecycle phases: the first is procurement and inventory storage; the second is use in a manufacturing process or research program; and the third is post-use, including onsite handling, removal and beneficial reuse, recycle or disposal. A number of considerations including regulations, safety, material utilization ...


    By Clean Harbors

  • New OSHA program in 2010 targets hexavalent chromium (Hex Chrome)

    OSHA has launched a new National Emphasis Program (NEP) in 2010, designed to target workplaces with exposures to hexavalent chromium and certain other metals such as antimony, arsenic, cadmium, lead and iron oxide. Targeted industries include electroplating, aircraft manufacturing, welding, shipbuilding, iron and steel mills, ferrous foundries, chrome color manufacturing and other pigment ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you