Only show results in Virginia? Ok

PCBs services for Health and Safety

  • Decontamination of PCB Materials

    Our core competence is the decontamination of PCB-containing transformers. For this purpose, we developed the LTR2 technology (Low-Temperature Rinsing and Re-Use/Recovery), one of the most advanced decontamination technologies in the world. At the start of the process, the PCB fluid is separated from the solid materials, which are then put through ...

    By Envio Recycling GmbH & Co. KG based in Dortmund, GERMANY.

  • Demolition Services

    USA offers a full range of precision demolition and dismantling services for the decontamination, decommissioning, and demolition of structures, buildings, chemical and refining facilities, equipment, and paved surfaces. The demolition market demands the skill to disassemble, salvage, and recycle a variety of structures and equipment, often in a ...

    By USA Environment, LP based in Houston, TEXAS (USA).

  • PCB Disposal Services

    With our PCB disposal program, C.L.E.A.N.’s goal is to ensure that your PCB waste is disposed of in accordance with all applicable provincial and federal legislation. Wherever possible, we maximize the recycling opportunities for waste materials.

  • PCB Design & Assembly Services

    PCB Design uses state of the art design tools to include auto route and quickly design the most complex PCB's in the industry. With our seasoned veterans, we'll assist you with every step of the way in concept, layout, test, and development of your hardware. Every PCB design involves layout, application test engineer, and project manager to ensure ...

    By Evans Analytical GroupĀ® (EAG) based in Sunnyvale, CALIFORNIA (USA).

  • Stepwise Consulting Services

    No need to commit yourself to a larger project or an expensive subscription service.

    By 2.-0 LCA consultants based in Aalborg East, DENMARK.

  • Universal Waste Recycling Service

    Overland Environmental Services, Inc. provides industrial customers with a full service, safe and cost-effective program that will assist in the collection, storage, and labeling requirements for all Universal Waste. An experienced service representative is available 24/7/365 to manifest and transport waste to a fully licensed and insured ...

    By Overland Environmental Services, Inc. based in MISSISSIPPI (USA).

  • PCB Contaminated Material

    PCB Contaminated Waste Oil and Florescent Light Ballasts: Drums must be regulation 55 gallon, 17C DOT approved. Maximum weight per drum is 800 Pounds. We require two to three days notice for pick-ups.

    By Recovery Express, Inc. based in Newtonville, MASSACHUSETTS (USA).

  • Polychlorinated Biphenyls Management Service

    For years, PCBs or polychlorinated biphenyls were used extensively in a wide range of industrial applications, including sealants, caulking compounds and paint adhesives. In particular, PCBs were widely used as coolants and lubricants in electrical transformers, capacitors and lamp ballasts.

    By Quantum Murray LP (QMLP) based in Kamloops, BRITISH COLUMBIA (CANADA). from Hazardous Materials Service line

  • Comprehensive Transformer Services

    Tri-Phase provides safe on-site removal of both PCB contaminated and non-contaminated electrical equipment with decontamination and recycling capabilities in the United States at our DEC Registered facility located in New York State. Our Staff membership in the PCB Elimination Network (PEN) Stockholm Convention, gives us the expertise to provide ...

    By Tri-Phase LLC based in NEW YORK (USA).

  • Valeport Service and Calibration

    You will be issued an RMA (Return to Manufacturer Authorisation) number which will be needed for the completion of the RMA document which can be downloaded below. If you are returning goods from outside the EU, please also note the Return Of Goods instructions document which provides important and useful information to speed customs clearance into ...

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

  • Hazardous Site Management

    EI prides itself on helping clients achieve cost-effective response actions under CERCLA and state hazardous waste laws. EI has provided advice on all phases of response actions -- preliminary assessment, remedial investigation and risk assessment, feasibility study, and remedy selection and implementation.

    By Environment International LTD based in Seattle, WASHINGTON (USA).

  • In Situ Soil Blending

    Redox Tech, an in situ soil and groundwater remediation firm, announces their improved amendment delivery method. The new method, in situ soil blending, will revolutionize the remediation market place. Redox Tech is already a recognized leader for development of soil and groundwater remediation amendments. The new delivery method complements Redox ...

    By Redox Tech, LLC based in Morrisville, NORTH CAROLINA (USA).

  • Environmental & Related Audits

    ISO 14001 Assistance. Lead-based Paint testing. Indoor air quality studies. Heating oil tank/UST testing. PCB testing. Regulatory compliance (MDEQ MIOSHA). Storm water and SPCC. Pollution Incident Prevention Plan (PIPP). Joint Commission on Accreditation of Healthcare Organizations (JCAHO). Environmental Training. USEPA, MDEQ, and NIOSHA ...

    By Villa Environmental Consultants, Inc. based in Benton Harbor, MICHIGAN (USA).

  • PCB Management - Disposal Services

    PCBs were used in the manufacture of light fixture ballasts.  Typically, light ballasts contain 1-3 fluid ounces of PCB liquid which is sealed within the capacitor. Handling of non-damaged (i.e. sealed) ballasts should not pose a hazard. However, damage is not always readily evident.  Where renovations involve removal of fluorescent ...

    By Accredited Environmental Technologies, Inc. based in Media, PENNSYLVANIA (USA).

  • Container and Vehicle Interior Cleaning Services

    When cleaning transport containers, silo and commercial vehicles complex wastewater is generated depending on the goods transported before the cleaning. The composition of the resulting wastewater changes permanently. Flocculation plants to treat those wastewaters are especially in combination with increasing proportions of chemical residues and ...

    By Weidner Ireland Ltd based in IRELAND.

  • Excavation/Remediation Service

    HM Environmental Services, Inc. has extensive experience in environmental remediation. All of our staff is trained in proper excavation procedures along with 40 hour OSHA HAZWOPPER training. Our services encompass excavation and removal of impacted soils, removal of ASTs and USTs, site cleanups, demolition, and ...

    By HM Environmental Services, Inc. based in Mt. Clemens, MICHIGAN (USA).

  • Environmental Site Assessments (ESA)

    Hanover Environmental Services, Inc.'s staff prepares Phase I ESAs under the direction of a State of California Registered Environmental Assessor (REA). The preparation of an ESA includes a review and analysis of existing data and information concerning a property, as well as an update, review and analysis of any current information and data ...

    By Hanover Environmental Services Inc. based in Chico, CALIFORNIA (USA).

  • Sample Collection and Analysis to Consultation and Remediation

    Industrial hygiene anticipates, recognizes, evaluates and controls factors in the workplace that may cause sickness, impaired health, or significant discomfort among your workers. If you already have your own Safety and Health team, use Adirondack's experienced experts to supplement your ongoing IH programs. We provide best-practice consultation, ...

    By Adirondack Environmental Services Inc. based in Albany, NEW YORK (USA). from Comprehensive Industrial Services Service line

  • Supplemental Technologies

    Refinement of Current Remedial Process: Private/Public Funding. NRC-IRAP. Currently Developing Remediation Approaches for: Ammonium/Nitrates. PCBs. Sulfolane.

    By Trium Environmental Inc. (TRIUM) based in Cochrane, ALBERTA (CANADA).

  • ECCS - Mobile Laboratory Services

    ECCS mobile laboratories are each equipped with full-size instruments, including GC and GC/MS systems for volatile, PAH, pesticide, and PCB analysis; ICP/MS, AA, and XRF for metals analysis; and LC/MS/MS for perchlorate and explosives analysis. We often field redundant instruments to ensure uninterrupted service and maximum ...

    By Environmental Chemistry Consulting Services, Inc. (ECCS) based in Madison, WISCONSIN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you