We couldn't find any pcbs services suppliers or service providers located in Australasia

Here is a list of services results with suppliers serving Australasia

PCBs services for Health and Safety available in Australasia

  • AST - Global Customer Support

    AST’s Global Customer Support department provides 24/7 support to customers around the globe. The telephone support line and email account are constantly manned and all support requests are logged on the AST interactive ticket system. Support staff are well equipped to offer pre and post-sales support for hardware, airtime and applications ...

    By AST Systems US based in Chandler, ARIZONA (USA).

  • Consulting Services

    AEHS was created in 1989 to facilitate communication and foster cooperation among environmental health and science professionals. Based on our experience and network, we are uniquely positioned to bring to bear the technical experts and information your organization needs.

    By The Association for Environmental Health and Sciences based in Amherst, MASSACHUSETTS (USA).

  • Deactivation, Decommissioning, Decontamination and Demolition Services

    Redundant, outdated and out-of-service facilities pose many challenges. To manage risk and drive down cost, owners need expert assistance with the deactivation, decommissioning, decontamination and demolition (D4) of these surplus properties.

    By Arcadis based in Highlands Ranch, COLORADO (USA). from Deactivation, Decommissioning, Decontamination and Demolition Services Service line

  • Contamination Assessment & Remediation

    GHD, through technical knowledge and experience can demonstrate cost savings using innovative and sustainable assessment, management and remedial solutions to contamination problems. We have a proven record in dealing with some of the most difficult contaminated sites caused by a wide range of industries. We have proven our competitive edge in ...

    By GHD Pty Ltd based in AUSTRALIA.

  • GTR - Gas Thermal Remediation

    ISOTEC is now part of the GEO team implementing Gas Thermal Remediation (GTR) for In-Situ Thermal Desorption (ISTD), Ex-Situ Thermal Remediation, Thermal Conductive Heating (TCH), and Thermally-Enhanced Vapor Extraction (TEVES) projects in North America. GTR units heat by natural gas or propane allowing the greatest flexibility in thermal ...

  • Chemical Analyses

    BDS has a well-equipped chemical analytical laboratory in which we perform extractions and fractionations on a wide range of matrices. In addition we offer GC-ECD analysis for the detection of nondioxin-like PCBs.

    By BioDetection Systems b.v. based in Amsterdam, NETHERLANDS.

  • Organochlorine pesticides (OCP) and polychlorinated biphenyls (PCB) Testing Services

    OCP have widely used in agriculture due to their practical application eradicating insect problems and PCBs are being used for inks and organic dyes. However these compounds also effect human health and their toxicities are persistent. Despite being discontinued, they are still found in many areas around the world and continue to steep through to ...

  • Site Evaluation and Restoration Services

    Contaminated sites are a huge liability. They are costly, encompass health-based and financial risks and can attract negative attention. With the right care, these problem properties can once again become profitable assets.

    By Arcadis based in Highlands Ranch, COLORADO (USA). from Site Evaluation and Restoration Services Service line

  • Remediation Management Services

    We provide our clients with comprehensive environmental remediation management services, including: Designing, permitting, supervising, and interpreting site investigations; Risk assessments according to risk-based corrective action legislation; Engineering evaluations and feasibility studies; Development of remedial solutions and preparation of ...

    By LENOCI Environmental Consulting Ltd. based in Solymar, HUNGARY.

  • Services

    In order to provide a global service to its customers, the GMT Group offers a full range of services associated with its products. Site survey to determine the best solutions for your requirements. Measuring using laser metrology. Drawing up calculation notes to ensure the resilience of our special equipment. Acoustic analysis to reduce noise ...

    By GMT International based in Avignon, FRANCE.

  • Assessing the Need for Remedial Measures and the Level of Urgency

    Based on the results of the on-site inspection/examination/building examination and, in some cases, based also on the metrological and analytical results, the need for remedial measures and the level of urgency of such measures that may be necessary at your workplace or in your rooms and buildings needs to be clarified and assessed in line with ...

    By AB-GM based in Mannheim, GERMANY.

  • Bio Float for Full-Scale Validation

    Over the last 8 years, the focus of our Company Biorem Engineering has been on the development of an on-spot remediation technology for sediments contaminated with poly chlorinated biphenyls (PCB) and other persistent toxic chemicals. Early research and development existed through a collaborative partnership with international universities and ...

    By Biorem Engineering SA based in Neuville-en-Condroz, BELGIUM.

  • Polychlorinated Biphenyls Services

    Specialty solution/mixtures of native and mass-labelled polychlorinated biphenyls (PCBs) have been prepared by Wellington in our on-going attempt to satisfy our customers’ needs. These solutions include multi-point calibration sets which can be used for the analysis of the 12 WHO (“dioxin-like”) PCBs as well as PCBs-170 and -180, ...

    By Wellington Laboratories Inc. based in Guelph, ONTARIO (CANADA).

  • Spare Parts Services

    Britannia manufacture and supply a complete inventory of Ross Hill or Hill Graham Controls spare parts. We are able to manufacture any printed circuit board, AC or DC control module, or provide an updated, compatible version which may previously have been supplied by Ross Hill Controls or Hill Graham Controls. We can help you identify unusual and ...

    By Britannia Petroleum Ltd based in London, UNITED KINGDOM.

  • Thermal Desorption Service

    Management of contaminated sites, refineries and other petroleum waste generators has become a major environmental issue. The worldwide environmental awareness has corresponded to new laws and regulations governing all aspects of waste storage, treatment and disposal. Bans on the disposal of contaminated soil and petroleum waste in landfills and ...

    By OilTech-Winnes based in Berg, GERMANY.

  • Legal Support Services

    Intrinsik can provide a multitude of scientific and consulting services tailored to the requirements of legal professionals in support of environmental boards and tribunals, and personal injury or class action litigation arising from environmental, occupational, domestic, medical, or other exposure to potentially hazardous substances and agents.

    By Intrinsik Inc. based in Mississauga, ONTARIO (CANADA). from Legal Support Services Service line

  • Environmental Remediation Expertise

    ECC provides cradle-to-grave environmental remediation services. With progressively stringent environmental regulations, as well as increased expectations and demands on our clients to clean up contaminated sites, ECC has developed processes that have evolved through time and deliver results quickly, safely, and efficiently. We are experienced in ...

    By Environmental Chemical Corporation (ECC) based in Burlingame, CALIFORNIA (USA).

  • Valeport Service and Calibration

    You will be issued an RMA (Return to Manufacturer Authorisation) number which will be needed for the completion of the RMA document which can be downloaded below. If you are returning goods from outside the EU, please also note the Return Of Goods instructions document which provides important and useful information to speed customs clearance into ...

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

  • Hazardous Site Management

    EI prides itself on helping clients achieve cost-effective response actions under CERCLA and state hazardous waste laws. EI has provided advice on all phases of response actions -- preliminary assessment, remedial investigation and risk assessment, feasibility study, and remedy selection and implementation.

    By Environment International LTD based in Seattle, WASHINGTON (USA).

  • Restoration and Disposal Services

    Our soil is a valuable resource. To counter the increasing consumption of these important areas our greenspace needs to be protected, and disused industrial sites should be restored for further use.Brownfield recycling is receiving great attention nowadays – and we have the expertise and technology to do the job. This may involve the ...

    By ZÜBLIN Umwelttechnik GMBH based in Stuttgart, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you