Persistent Organic Pollutants Manufacturers, Suppliers & Companies (Health And Safety) Near France
-
ManufacturerOffice in Lyon Cedex 03, FRANCE
CTP was founded in 1985 and since then, our engineers, chemists and researchers have been developing leading edge technologies to serve the individual needs of our customers worldwide, covering all industrial sectors. CTP is one of the world's ...
CTP - Model RecuKAT - Recuperative Catalytic Oxidizer (CO)
For high cleaning efficiency, the RecuKAT's attractive economic performance is due to the low reaction temperature of the CTP catalysts. CTP can refer to more than 30 years of experience with catalysts in industrial applications. The RecuKAT is ...
CONTACT SUPPLIER -
Manufacturerbased in Villebon-sur-Yvette, FRANCE
Since its creation, Tecora offers its customers measurement and monitoring technologies enabling them to characterize industrial processes up to their final impact on people and their environment. When necessary, Tecora also provides appropriate ...
Tecora - Model DECS - Continuous Emissions Dioxin Sampler
DECS is the solution offered by CDL-Tecora for the continuous emission sampling of Dioxins, Furans (PCDD/PCDF),PCB and other POPs. According to EN 1948 and USEPA M23 standard, DECS adopts the filter/condenser method with adsorbing trap on wet gas. ...
CONTACT SUPPLIER -
Technologybased in Schlieren, SWITZERLAND
Nanoporous catalysts for oxidation and subsequent mineralization of micropollutants. Oxyle, cleaning our water and protecting our health. We are driven by our vision to safeguard the health of the most precious resource for all life forms: Water. ...
Oxyle - Universal Treatment Technology for Removal of Micropollutants
We have developed a unique technology that offers complete removal and real-time monitoring of a wide range of micropollutants in a cost-effective and sustainable manner. Using our novel approach, pollutants are completely and truly eliminated as ...
CONTACT SUPPLIER -
Manufacturerbased in Pregnana Milanese, ITALY
S-Keeper 7 CEMS Continuous Emissions Monitoring System Type Approved for ship installation has been entirely devised, engineered, built and validated by TECNOVA HT - Milan, Italy. TECNOVA Group has been in business since 1974 in the Process ...
-
Manufacturerbased in Pregnana Milanese (MI), ITALY
TECNOVA Group has been operating as a Global Player in the Process Automation industry since 1974. It provides the best field instrumentation for vertical solutions, reliable System Integrations for both Emissions and Processes, and has a skilled ...
-
Manufacturerbased in Cogliate (MB), ITALY
TCR Tecora, a leading Italian private company that develops, manufactures and supplies instrumentation for air pollution and emission sampling & analysis. TCR Tecora is a leading supplier of stack emissions sampling systems, continuous dioxin ...
Isokinetic Heated Probe for PCDD/F - Model MCS2 - TCR Tecora
Condensing and adsorbing device MCS2 for the determination of PCDD/PCDF in compliance to EN 1948 Method. The EN 1948-1 “Filter condenser” method foresee the isokinetic sampling with a heated probe, filterholder and adsorbing trap ...
CONTACT SUPPLIER -
Laboratorybased in Southampton, UNITED KINGDOM
Marchwood Scientific Services is a leading provider of quality laboratory services to both the environmental and food sectors.We offer an independent service for the analysis of a wide range of organic and inorganic materials specializing in dioxins ...
Dioxins Analysis
Polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (dioxins and furans) are a family of over 200 chlorinated organic compounds. Dioxins are ubiquitous in the environment at very low levels, and reach humans by intake in food, ...
CONTACT SUPPLIER -
Service providerbased in , GERMANY
AVG disposes of all the combustible materials in the European waste catalogue - in solid, paste or liquid form, loose or in drums. This includes hazardous wastes of all types and origins, such PCB-contaminated oils, pesticides, paints, lacquers and ...
-
Manufacturerbased in Culemborg, NETHERLANDS
E.F.S. stands for Euro Feed Services and was founded by Bert van Bremen and Cees Twint in April 1996. They were both working in the mixed feed industry at the time and both had the drive to set out on their own and establish their own company. It ...
-
Engineering service providerbased in Bristol, UNITED KINGDOM
Abricon is an operating division of TCSR Limited, a privately owned UK registered company involved in sustainable development, hazardous waste management and the provision of solutions to complex environmental problems. Abricon and TCSR Limited ...
-
Manufacturerbased in Amsterdam, NETHERLANDS
BioDetection Systems b.v. (BDS) is a Dutch company providing bio-based screening technologies for safety, quality and bioactivity assessment. These services are available through our own laboratories, but may also be performed under license. In ...
Contaminant Detection and Quantification Services
We offer various services for the cost-effective detection of contaminants in e.g. food, feed and environmental samples. Contaminants may either be detected by their biological effect using CALUX assays, or by chemical analysis (non dioxin-like ...
CONTACT SUPPLIER -
TechnologyOffice in Arnhem, NETHERLANDS
MinPlus is produced in the patented “Controlled Thermal Conversion” process (CTC) from the otherwise discarded mineral fraction of paper recycling. The process is CO2 neutral. Small particulate lime and clay minerals are re-used in a wide-pore ...
-
ManufacturerDistributor in Llanera (ASTURIAS), SPAIN
AMS Analitica deals with device production and distribution to monitor air and workplace parameters, environment and chimney emission control. Our constant pursuit developing optimal solutions it is our business focus. This process makes more and ...
Air Flow - Model PM2,5-HVS - High Volume Sampler for Environmental Parameters
The new impactor models have been manufactured in full respect of features published in reference norms regarding impactor for PM2.5 dust particle fractionation, with the option of simple adaptor kits for interchanging between one sampler and ...
CONTACT SUPPLIER -
Distributorbased in Staffordshire, UNITED KINGDOM
OSS Enviro are specialists in air emissions products, stack testing products, source testing products and the environmental air services. Our head office, based in the UK, has a team of professionals with over 40 combined years of accumulated ...
-
Engineering service providerbased in Selby, UNITED KINGDOM
Leading the way in cleaning the air we breathe, REL design and manufacture hot gas filtration systems all from our manufacturing facility in Yorkshire. The REL service team can also install and maintain your hot gas filtration system, and with a ...
-
Distributorbased in Leeds, UNITED KINGDOM
The main purpose of RecycleAid.co.uk is to save as many printer cartridges and mobile phones as possible from being sent to landfill and turn them into a cash revenue. 'Together we can make a difference.' The value of empty printer cartridges ...
-
ManufacturerDistributor in , ITALY
Founded in 1985, Fluid Management Systems, Inc. designs, manufactures, and supports analytical instruments used by scientists to perform extraction, cleanup, fractionation and concentration of samples prior to chemical analysis. Some of the ...
FMS - Model Power Prep/NG - Dioxins and PCBs Sample Preparation System
Sample cleanup is a very important step because methods often don’t respond to the analyte in its in-situ form, or the results can be distorted by interfering species. Column cleanup is used to eliminate interferences that can occur in the ...
CONTACT SUPPLIER -
Technologybased in Cumbria, UNITED KINGDOM
We are a 'clean-techresearch' and development business registered in England. Our vision and mission is; 'to become a leading global provider of technical solutions to environmental problems'. Cylenchar is currently developing and commercialising ...
-
Manufacturerbased in Frauental a.d.L., AUSTRIA
Ceram Austria GmbH has over 100 years history of producing technical ceramics and is one of the world's leading suppliers of industrial honeycomb ceramics. In addition to honeycomb and plate catalysts for stationary, marine and automotive ...
-
Consulting firmbased in Praha 1, CZECH REPUBLIC
E & H Services is a privately held technology and research company whose business is narrow, but highly specialized area of service and consulting services in the analysis of persistent organic pollutants (POPs) and other hormonally active ...
Elimination Services
E&H Services is engaged in the development and implementation of technologies for detoxification of persistent organic pollutants from solid, gas and liquid substances and offers consultancy service. We emphasize the solution which is affordable ...
CONTACT SUPPLIER
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you