Dioxin (Persistent Organic Pollutants) Equipment
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Compact Method 23 sampling system is utilized for US EPA Method 23 Determination of Dioxins and Furans from stationary sources. Dioxins and furans are an unwanted by-product of combustion processes such as municipal and industrial waste, wood and oil ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Automatic Dioxin Sampling System GT90 Dioxin+ is a future-proof solution for a long-term sampling of dioxin emissions in conformity to the European standards EN1948-1 and EN15267. The system represents the cutting-edge technology for dioxin sampling and fulfills all the requirements of the dioxin measurement ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous dioxin and furan emission monitoring by long-term sampling. TÜV and MCERTs certified, ETV EPA approved. The AMESA-D utilizes the water cooled probe method with Isokinetic sampling system coupled with XAD-II adsorbent cartridge for Long-term sampling of dioxins (PCDD), furans (PCDF) and other persistent organic contaminant ...
-
Manufactured by Metlab Miljö ABbased in SWEDEN
METLAB offer several alternative equipments for sampling of dioxins (PCDD/PCDF) and other organic micro-pollutants – all fulfilling the requirements in the European Standard EN-1948. The most frequent delivered equipment is the EVA Light Dioxin sampler. Also available are the older Nordic Dioxin Sampler and EVA Dioxin ...
-
Manufactured by GEA Bischoff GmbHbased in GERMANY
Polychlorinated dibenzodioxin and dibenzofuran (PCDD/F) occur in very small concentrations in the off gases of several industrial combustion processes in a temperature range of 200 to 400 °C. A typical dimension of the concentration of these substances within the off-gases is 2 to 4 n/gm³ TE*. This organic contamination is extremely toxic, is not decomposing in the nature and is ...
-
Manufactured by Chiron ASbased in NORWAY
Product no.: C2034.12-50-T. CAS Nr.: 30746-58-8. Specification: 50 µg/mL in toluene. Pack size: 1 mL. UN code: UN1920-3/PG2-E2. Stock status: Please ...
-
Manufactured by Tecorabased in FRANCE
DECS is the solution offered by CDL-Tecora for the continuous emission sampling of Dioxins, Furans (PCDD/PCDF),PCB and other POPs. According to EN 1948 and USEPA M23 standard, DECS adopts the filter/condenser method with adsorbing trap on wet gas. The system is permanently installed on stack for continuous sampling from 6 hours up to 6 ...
-
Manufactured by Reagen Biology LLCbased in CHINA
Contact: reagenllc@gmail.com / anna@reagan.us REAGEN™ Dioxin ELISA Test Kit is a indirect immunoassay (ELISA) for the quantitative analysis of Dioxin in fish, shrimp,soil and water. If necessary, positive samples can be confirmed by instrumental analysis or other conventional methods. The unique features of the kit are: High recovery ...
-
Manufactured by Tri-Mer Air Pollution Control Systemsbased in USA
Dioxins and furans are highly toxic byproducts of various industrial processes. These dangerous compounds have been known to cause several health effects and have been linked to causing cancer. ...
-
Manufactured by Reagen LLCbased in USA
Contact Angela : reagenllc@gmail.com Product Description REAGEN™ Dioxin ELISA Test Kit is a indirect immunoassay (ELISA) for the quantitative analysis of Dioxin in fish, shrimp,soil and water. If necessary, positive samples can be confirmed by instrumental analysis or other conventional methods. The unique features of the kit are: § High ...
-
Manufactured by J Carpenter Environmental LLC (JCE)based in USA
Dioxin and furan gas are byproducts of various combustion processes. Dioxin and furan gasses are hazardous and cause severe health conditions, including cancer. Therefore, these gases must be removed from the gas stream before emitting into the atmosphere. J Carpenter Environmental, LLC can help you reduce this air pollutant. J ...
-
Manufactured by Shinhan Techbased in SOUTH KOREA
Sampling Unit. Designed for outdoor mounting. Distance between Sampling and Control Units can be up to 100m. There is no need to put in or out the stack for each sampling. Easy substitution of filter holder cartridge, adsorbing trap and collection ...
-
Distributed by China Qingdao Huankong Equipment Co,.Ltd.based in CHINA
The equipment is used as a professional sampler for Dioxin in exhaust gas.It is in according with standard. The main feature is as follows; 1、colorful big touching screen 2、high stability and reliablity 3、automatic tracking,isokinetic sample 4、power-off ...
-
Manufactured by Fluid Management Systems, Inc. (FMS)based in USA
Sample cleanup is a very important step because methods often don’t respond to the analyte in its in-situ form, or the results can be distorted by interfering species. Column cleanup is used to eliminate interferences that can occur in the sample matrices. Multi-column cleanup procedures use multiple column chemistries to remove interferences and fractionate analytes of interest from ...
-
Manufactured by LCTech GmbHbased in GERMANY
Unbeatable Automation: DEXTech 16. With the sample clean-up system DEXTech 16, LCTech developed a sensation for PCB and dioxin analysis. With our extensive experience as a specialist in automated sample preparation, we set a new and unique standard: the fully automated clean-up of 16 samples in 1 sequence: for food, feed, ...
-
Manufactured by LCTech GmbHbased in GERMANY
LCTech columns are ready-to-use. DEXTech 16, DEXTech Pure, DEXTech Plus and DEXTech Heat are designed with a 3-column setup using an acidic silica column (pos. 1), an aluminium-oxide or florisil column (pos. 2), or a carbon column (pos. 3). Simply click in the respective columns in the column tower- "just click it". Afterwards a patented mechanism of the system automatically locks the tower. No ...
-
Manufactured by AMS Analiticabased in ITALY
Entirely managed by a microprocessor, equipped with a new 4.3 "color touch screen display, with 220V mains power supply and direct current, through the use of an external battery pack, it is the most compact high-volume sampler model in absolute on the market. The use of the AirCube Puf sampler is allowed in emergency situations for sampling toxic substances in the air during environmental events ...
-
Manufactured by GL Sciences Inc.based in JAPAN
These cartridges are designed for sample cleanup for dioxin analysis in compliance with JIS K-0311-1999, K-0312-1999. The cartridges are made of PP and compatible with automated instruments. ...
-
Manufactured by Dusconbased in ITALY
Our Mercury, Heavy Metals & Dioxins Control systems are based on activated carbon injection philosophy. These types of systems are in full accordance with the Best Available Technology (BAT) of activated carbon injection systems to control mercury, heavy metals and dioxins. Our multi-year experience with these types of systems ...
-
Manufactured by Fluid Management Systems, Inc. (FMS)based in USA
Imagine performing the Sample Cleanup process for POPs analysis in liquids and solids automatically in as little as 30 minutes. Built on 25 years of FMS, Inc. experience and technology that has processed millions of Dioxin samples, FMS introduces a new family of integrated, economical sample cleanup systems that combine manual sample prep ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you