Persistent Organic Pollutants Equipment For Health And Safety In Malaysia
-
PremiumManufactured by Jacobi Groupbased in SWEDEN
Activated carbons designed for air and gas treatment, covering a diverse set of applications including VOC abatement in air, odour control, solvent recovery, process gas purification, residential and commercial air treatment devices, cigarette filters, and cabin air filters and evaporative loss devices in automobiles. ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was built to capture and clean the gases generated from burning a mixture of medical waste (primarily soiled bandages). Suitable solution for most most medical processes (dependent on waste stream and ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This is one of the largest PCS systems we have developed. Capable of handling in excess of 1000kg per hour (FLOW RATE INSTEAD???), this unit features a large filter array and additional heat exchanger to reduce gas temperatures to the required levels for ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
For a less demanding, lower throughput gas cleaning system, the venturi scrubber is a well tested and respected design used by many industrial processes. It uses a combination of vortex technology and high pressure water misting to remove harmful elements from the exhaust ...
-
Manufactured by Lhoist Groupbased in BELGIUM
Minsorb is the 100% mineral alternative for the removal of micro-pollutants in dry flue gas treatment. dioxins/furans (PCDD/PCDF), PCB and PAH. Mercury: metallic and ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The new XC-53 from Apex Instruments is designed as a cost-effective entry-level metering console for isokinetic sampling. The console features our advanced Peak 32 microcontroller module (MCM) for measuring and displaying stable pressures and temperatures. The transflective LCD screen displays the elapsed time, the pitot velocity pressure (?P), the venturi sample flow pressure (?H) and the ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Compact Method 23 sampling system is utilized for US EPA Method 23 Determination of Dioxins and Furans from stationary sources. Dioxins and furans are an unwanted by-product of combustion processes such as municipal and industrial waste, wood and oil ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The XC-502 is an all-in-one digital isokinetic source sampler that offers numerous features to increase convenience and efficiency for stack testers. The latest installation in the Apex Instruments Peak 32 series, the XD-502 is powered by the PIC32 microcontroller module and features a sunlight-readable backlit ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was designed to capture all the gases, soot and entrained solids emitted by the incinerator while burning a low plastic content RDF mix and process it to meet the European regulations, which are set out in directive 2000/76/EC, dated 4th Dec 2000. Suitable for most small scale industrial ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous dioxin and furan emission monitoring by long-term sampling. TÜV and MCERTs certified, ETV EPA approved. The AMESA-D utilizes the water cooled probe method with Isokinetic sampling system coupled with XAD-II adsorbent cartridge for Long-term sampling of dioxins (PCDD), furans (PCDF) and other persistent organic contaminant (POPs). AMESA-D is the most utilized dioxin monitoring ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
The HP5 heated sampling probe is ideal for the determination of particulate matter and chemicals in the gas phase.Its unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around its axis, which is needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2 – this also allows it to be easy to move it with just two ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
The SC5 is used as a cooling bath for impinger trains or as a chiller with recirculation capabilities for the condensing of micropollutants such as PCDD/PCDF, Heavy Metals etc. Thanks to wide plastic internal bath, it’s possible to place the complete glass set within the SC5 and use it condensation/absorber train for long lasting sampling. The sliding lock allows the device to be completely ...
-
Manufactured by SPEX SamplePrep - Antylia Scientificbased in USA
The Geno/Grinder is an automated high-throughput plant & animal tissue homogenizer and cell lyser. It is equipped with an adjustable clamp that accommodates a full range of sample vials from 2mL to 50mL centrifuge tubes or up to six deep-well titer plates. It is specifically designed for rapid cell disruption, cell lysis and tissue homogenization, enabling fast and efficient extraction of ...
-
based in UNITED KINGDOM
SPME 100 micrometer thickness- 10 mm length- red- pk ...
-
Manufactured by Tisch Environmental Incbased in USA
The most comprehensive indoor passive air sampler and outdoor passive air sampler yet for measuring the concentrations of persistent organic pollutants (POPs) in the air today. Adapted for remote outdoor use, the PUF (polyurethane foam) disks collection method requires no electricity to ...
-
based in UNITED KINGDOM
SPME 100 micrometer thickness- 10 mm length- red- pk ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
The ST5 is the next generation isokinetic sampler, developed to be efficient, rugged, accurate and user friendly. The perfect companion for stack testers. The ST5 includes all the measuring sensors inside its robust structure making it a single practical device to be taken on the stack and reducing the need of maintenance. Precise isokinetic condition, sampling flowrate is directly controlled ...
-
Manufactured by SPEX SamplePrep - Antylia Scientificbased in USA
The 1600 MiniG® is the ideal solution for labs that want a compact yet powerful tissue homogenizer and cell lyser. This mechanical disruptor is designed to effectively disrupt cellular materials by oscillating one or two deep-well titer plates vertically. Clamp also holds up to 6 x50 mL vials or 48 x 2 mL vials or 24 x 5 mL vials. Applications include: Tissue Homogenization, DNA/RNA ...
-
based in UNITED KINGDOM
SPME 100 micrometer thickness- 10 mm length- red- pk 1. ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
The ST5 is the next generation isokinetic sampler, developed to be efficient, rugged, accurate and user friendly. The perfect companion for stack testers. The ST5 includes all the measuring sensors inside its robust structure making it a single practical device to be taken on the stack and reducing the need of maintenance. Meets and exceeds the requirements defined in the sampling methods such as ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you