Persistent Organic Pollutants Equipment For Health And Safety Near Nova Scotia
-
based in USA
Batch Pile Treatment is one of the most commonly applied methods of Ex Situ Thermal Desorption for the remediation of soils. When soil is heated, the organic contaminants extracted from the soil pile or are destroyed in ...
-
Manufactured by Asahi/America, Inc.based in USA
Butterfly valves are named for the wing-like action of the flow-controlling disc, which operates at right angles to the flow. The disc has about the same diameter as the connecting pipe, and the flow is straight through, with a low pressure drop. Maintenance is easy due to the small number of moving parts. The butterfly valve can be used either as an on/off or modulating type of valve. ...
-
Manufactured by Kerfoot Technologies, Inc. (formerly K-V Associates, Inc.)based in USA
It all started with the belief that ozone, one of nature’s most powerful oxidants, could be deployed as small gaseous bubbles throughout the pores of a contaminated soil matrix to immediately react with and destroy volatile organic contaminants. From that belief, a new remediation method was ...
-
Manufactured by Cytivabased in USA
Cytiva’s Whatman Grade GF 8 glass microfiber filters are used for filtration of coarse particles. GF 8 offers faster filtration and a higher air flow rate compared to the similar Grade GF 9 ...
-
Manufactured by Cytivabased in USA
Whatman Grade GF 9 glass microfiber filters from Cytiva Healthcare’s Life Sciences business are strengthened with an inorganic binder for environmental analysis of coarse, heavy ...
-
Manufactured by Fluid Management Systems, Inc. (FMS)based in USA
Sample cleanup is a very important step because methods often don’t respond to the analyte in its in-situ form, or the results can be distorted by interfering species. Column cleanup is used to eliminate interferences that can occur in the sample matrices. Multi-column cleanup procedures use multiple column chemistries to remove interferences and fractionate analytes of interest from ...
-
Manufactured by Fluid Management Systems, Inc. (FMS)based in USA
Solvent evaporation/concentration is a critical step in the sample preparation process used by the clinical, food, environmental, pharmaceutical, chemical, and biotechnology industries. Because so many different types of samples and solvents are used for evaporation or concentration, no single technique can provide a universal solution. Over the years, many evaporation and concentration systems ...
-
Manufactured by Fluid Management Systems, Inc. (FMS)based in USA
Imagine performing the Sample Cleanup process for POPs analysis in liquids and solids automatically in as little as 30 minutes. Built on 25 years of FMS, Inc. experience and technology that has processed millions of Dioxin samples, FMS introduces a new family of integrated, economical sample cleanup systems that combine manual sample prep steps into one automated process. The EP-110 systems ...
-
Manufactured by Fluid Management Systems, Inc. (FMS)based in USA
After 30 years of leading automation in the field of Dioxin & PCBs analysis, FMS introduces EZprep 123 to further simplify the dioxin sample preparation process and make it easier to perform. The EZprep 123’s impressive performance allows Dioxin labs to reduce turnaround time and increase quality of the analysis while reducing the ...
-
Manufactured by Fluid Management Systems, Inc. (FMS)based in USA
Pressurized Fluid Extraction (PFE) or Pressurized Liquid Extraction (PLE) is a new sample extraction method that employs liquid solvents at elevated temperatures and pressures to prepare samples for analysis by either gas chromatography or liquid chromatography. Pressurized liquid extraction is similar to Soxhlet extraction, except that during the extraction process the solvent condition inside ...
-
Manufactured by Waters Corporationbased in USA
Ideally suited for analytical challenges in food safety and water quality testing, Waters’ Pesticide Screening Application Solution with UNIFI™ gives scientists the ability to test more food products and environmental samples for increasing numbers of residues and contaminants below regulatory limits. The Pesticide Screening Application Solution with UNIFI is custom built to minimize both ...
-
Manufactured by Waters Corporationbased in USA
Waters Alliance® System for Carbamate Analysis is a complete method and instrumentation package for the high-sensitivity analysis of N-methylcarbamate and N-methyl-carbamoyloxine pesticides and related compounds in a variety of environmental and food samples, including drinking and raw source waters, crop residues, and processed foods. For research scientists and chemists who need the most ...
-
based in UNITED KINGDOM
SPME 100 micrometer thickness- 10 mm length- red- pk 1. ...
-
based in UNITED KINGDOM
SPME 100 micrometer thickness- 10 mm length- red- pk ...
-
based in UNITED KINGDOM
SPME 100 micrometer thickness- 10 mm length- red- pk ...
-
Manufactured by Clariant International Ltd.based in GERMANY
Clariant has developed highly-active precious metal catalysts that tolerate halogenated hydrocarbons, such as trichloroethylene, perchloro-ethylene, methylchloride, vinylchloride, etc., and also to oxidize these constituents to end products: H2O, CO2 and HCl. Typical applications for these catalysts are exhaust gas treatment in soil remediation and in various chemical/pharmaceutical production ...
-
based in USA
Includes everything in the Comprehensive Scan and adds 17 pesticides to the analysis. Perfect for clients near farming areas or who suspect inappropriate use of pesticides in the surrounding ...
-
PremiumManufactured by Jacobi Groupbased in SWEDEN
Activated carbons designed for air and gas treatment, covering a diverse set of applications including VOC abatement in air, odour control, solvent recovery, process gas purification, residential and commercial air treatment devices, cigarette filters, and cabin air filters and evaporative loss devices in automobiles. ...
-
Manufactured by PyroGenesis Canada Inc.based in CANADA
Evolving from our plasma platform developed for the US Military, SPARC is a highly effective, patented process for the complete destruction of ozone depleting substances and other environmentally noxious chemicals. SPARC is the latest innovation from our team of engineers, scientists and technicians. Refrigerants and other fluorinated chemicals (CFC, HCFC, HFC, PFC) that often have very high ...
-
Manufactured by Biothermica Technologies Inc.based in CANADA
The BIOTOX regenerative thermal oxidation process consists of oxidizing in a combustion chamber the organic compounds (vocs and cocs) contained in the industrial emissions being treated, while recovering sensible heat from combustion gases by means of ceramic beds. The recovered heat is then used to preheat entry gases thanks to an efficient heat transfer between entry and exit gases. The typical ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you