safety shower Equipment

59 Results found
Only show results available in Virginia?
OK
  • Category: Health & Safety ×

  • Subcategory: Personal Protective Equipment ×

  • Keyword: safety shower ×

Model BR 071 075 - Safety Shower

by Breuell Ingenieurbüro GmbH     based in Hamburg, GERMANY

ClassicLine body safety shower without valve, wall mounted, exposed pipework. Water inlet: 3/4' female. Projection: 565 mm. Installation height: 2335 mm (+/- 100 mm). Material: brass, chemical resistant red powder coated. Shower head: B-SAFETY - high-performance shower head. Flow rate: 60 litre / minute at 1.5 bar dynamic water pressure.

Showers & Eyebaths - Model GPSS3 - Portable Stainless Safety Shower

by Showers & Eyebaths Services Ltd     based in St Helens, UNITED KINGDOM

Manufactured from 304 stainless steel with an aluminium carry case which are corrosion resistant materials, giving superior strength; a long life, and suitability for outside use. Ideal for use as a temporary safety shower.

Showers & Eyebaths - Model GFTS12L/15L - Tank Safety Shower With Chiller

by Showers & Eyebaths Services Ltd     based in St Helens, UNITED KINGDOM

Manufactured from Glass Reinforced Plastic and Stainless Steel which are corrosion resistant materials, giving a long life, and suitability for outside use. Designed to be highly visible for ease of identification.  These units are ideal for areas where there is no water supply; interrupted water supply; low water pressure to guarantee ...

Showers & Eyebaths - Model GFTS12L - 1500L - Tank Safety Shower with Atex Chiller

by Showers & Eyebaths Services Ltd     based in St Helens, UNITED KINGDOM

Manufactured from Glass Reinforced Plastic and Stainless Steel which are corrosion resistant materials, giving a long life, and suitability for outside use. Designed to be highly visible for ease of identification. These units are ideal for areas where there is no water supply; interrupted water supply; low water pressure to guarantee correct flow ...

Showers & Eyebaths - Model SD370 - Tropical Mains Fed Safety Shower

by Showers & Eyebaths Services Ltd     based in St Helens, UNITED KINGDOM

Manufactured from either galvanised carbon steel protected by green enamel or stainless steel, these combination units drain down after use and are ideal for hot climates. Available for non hazardous and hazardous areas. ATEX & GOST Certified.

Frost Protected Safety Showers

by FSP-Tech GmbH     based in Essen, GERMANY

Frost protected, heated safety eye showers and body showers made of stainless steel, for wall and ground mounting.

Model GES1R - Cubicle Safety Shower

by Showers & Eyebaths Services Ltd     based in St Helens, UNITED KINGDOM

Manufactured from Glass Reinforced Plastic and Stainless Steel which are corrosion resistant materials, giving a long life, and suitability for outside use. Designed to be highly visible for ease of identification. These units are ideal for areas to contain the water and to protect the person from climate conditions. Suitable for non hazardous or ...

Model S100 - Ceiling Mounted Safety Shower

by Showers & Eyebaths Services Ltd     based in St Helens, UNITED KINGDOM

Manufactured from 304 stainless steel. Ideal for indoor installation or for areas where there is restricted space. Available for non hazardous and hazardous areas.

Safety Shower Cubicle

by FSP-Tech GmbH     based in Essen, GERMANY

Safety shower cubicle made of stainless steel, with catch basin and sides enclosed  made of stainless steel.

Model GFTS 12L - 15L - Tank Safety Shower

by Showers & Eyebaths Services Ltd     based in St Helens, UNITED KINGDOM

Manufactured from Glass Reinforced Plastic and Stainless Steel which are corrosion resistant materials, giving a long life, and suitability for outside use. Designed to be highly visible for ease of identification. These units are ideal for areas where there is no water supply; interrupted water supply; low water pressure to guarantee correct flow ...

Hughes - Model STD-18K - Unheated Emergency Safety Shower

by Hughes Safety Showers     based in Bredbury - Stockport, UNITED KINGDOM

Unheated Emergency Safety Shower. (Shown with optional Optiflex). Available in Galvanised or Stainless Steel.

Unheated Safety Showers

by FSP-Tech GmbH     based in Essen, GERMANY

Industrial unheated safety showers made of hot-dip galvanised steel, PremiumLine Industrial unheated safety showers made of stainless steel.

Safety Showers for Hot Climates

by FSP-Tech GmbH     based in Essen, GERMANY

Self-draining safety showers (industrial use) - made of steel, PremiumLine self-draining safety showers (industrial use) - made of stainless steel.

Safety Shower Valves

by FSP-Tech GmbH     based in Essen, GERMANY

Safety shower valve with draining, for wall- or ceiling mounting, Turning lever safety shower valves, Rod operated safety shower valves.

Export Range - Emergency Safety Showers

by Hughes Safety Showers     based in Bredbury - Stockport, UNITED KINGDOM

A general purpose range of Unheated Emergency Safety Showers and Eye/Facewash models designed specifically for export.

Lab Range - Emergency Safety Showers

by Hughes Safety Showers     based in Bredbury - Stockport, UNITED KINGDOM

A range of unheated Emergency Safety Showers and Eye/Facewash fountains ideal for laboratories, schools, store rooms and general light duty indoor use.

Premium Range - Emergency Safety Showers

by Hughes Safety Showers     based in Bredbury - Stockport, UNITED KINGDOM

A heavy duty range of  free standing, wall- or ceiling mounted Unheated Emergency Safety Showers and Eyebath/Facewash models.

Safety Shower BR 870 105

by Breuell Ingenieurbüro GmbH     based in Hamburg, GERMANY

ClassicLine frestanding self-draining body safety shower. Water inlet: 1 1/4' female. Projection: 640 mm. Total height: 2270 mm. Material: galvanised steel, whith powder coated, valve brass chrome-plated. Shower head: B-SAFETY - high-performance spray head. Flow rate: 75 litre / minute at 2 bar dynamic water pressure.

Model GFTS - Self Contained Tank Safety Shower

by Showers & Eyebaths Services Ltd     based in St Helens, UNITED KINGDOM

Manufactured from Glass Reinforced Plastic and Stainless Steel which are corrosion resistant materials, giving a long life, and suitability for outside use. Designed to be highly visible for ease of identification. Suitable for non hazardous or hazardous areas. Suitable for temperatures -20 deg C to +40 deg C.

Safety Shower BR 081 075

by Breuell Ingenieurbüro GmbH     based in Hamburg, GERMANY

ClassicLine Body-safety shower with valve, wall mounted. Water inlet: 3/4' male. Projection: 625 mm. Installation height: 2335 mm (+/- 100 mm). Material: brass, chemical resistant red powder coated. Shower head: B-SAFETY - high-performance shower head. Flow rate: 60 litre / minute at 1.5 bar dynamic water pressure.

Need help finding the right suppliers?

Let the XPRTs do the work for you