A polyurethane-based caulk grade swelling paste, AKWASWELL is used primarily to seal rough surfaces in concrete construction joints. Swelling up to 500% of its initial volume when hydrated by water, it creates a positive seal and stops the flow of water through the joint and is suitable for low to moderate hydostatic pressure conditions.
A hydrophilic rubber waterstop, AKWASTOP swells up to 300% upon contact with water and provides a consistent seal along the entire installation. It prevents water infiltration through cast-in-place concrete construction joints subjected to continuous or intermittent hydrostatic pressure.
A two-part prefabricated sheet drain composite consisting of a 3-dimensional polypropylene formed dimple core covered with a woven polypropylene filter fabric bonded to oneside. The formed-dimple core provides compressive strength and collects water for flow to drainage discharge pipes.
HYDROBAR TUBES are a detailing accessory product for CETCO Waterproofing Systems used at the footing/wall junction to provide additional waterproofing protection. HYDROBAR TUBES consist of a thin, watersoluble tubing filled with granular sodium bentonite. When wetted, the tubing dissolves, allowing the bentonite to hydrate and form into a dense, ...
A trowel-grade bentonite-based mastic that is used to detail at membrane terminations, around penetrations, over grouted concrete form-tie holes, and provide fillets to inside wall corners. Unlike most mastics, this premium mastic is capable of swelling and self-sealing upon hydration and is VOC compliant. Bentoseal can be covered with a ...
Designed to provide accessible covers for roof mounted drains, Inspection Chambers help to prevent debris from entering the drains and cutting off light to prevent the potential for plants to grow into the drains.
CORECLAD is a 24 ga. (0.61 mm) stainless steel sheet laminated with a 20 mil (0.50 mm) thick UV stable thermoplastic coating integrally bonded to one side. The thermoplastic coating is compatible with CoreFlex and CoreFlash membranes thus allows for thermoplastic welding to form a monolithic barrier. CORECLAD is also resistant to most forms of ...
The world’s leading Bentonite-Geotextile Waterproofing System. More than 50 years of proven performance. Designed for both vertical and horizontal foundation surfaces, VOLTEX incorporates the high-swelling and self-sealing properties of VOLCLAY sodium bentonite to form a monolithic, low permeable membrane to protect the structure from water ...
An active, flexible strip concrete construction joint waterstop, WATERSTOP-RX provides a strong positive seal by expanding upon contact with water. Proven effective on projects worldwide for over 20 years, WATERSTOP-RX is designed for both continuous and intermittent hydrostatic conditions. WATERSTOP-RX is available in multiple configurations.
A 100% Solids Fluid-Applied, HYDROFIX is a single component waterproofing system. Its fluid application allows it to be installed at difficult areas such as around multiple pipe penetrations and over irregular substrates and cures to form a seamless membrane that is positively bonded to the substrate.
A two-part prefabricated sheet drain composite consisting of a 3-dimensional polypropylene formed dimple core covered with a non-woven polypropylene filter fabric on one side. The formed dimple core provides compressive strength and collects water for flow to drainage discharge pipes.
A two-part prefabricated drainage composite consists of a high strength HDPE geonet core with a non-woven polypropylene filter fabric bonded to both sides. AQUADRAIN G20 is designed for horizontal and vertical applications requiring very high compressive strength with low to moderate flow properties.
A water-based latex adhesive used primarily to secure the Swelltite membrane in both vertical and horizontal applications. The product is VOC compliant and changes from a light gray to dark gray upon application. Waterproofing membrane is installed to adhesive after it turns to dark gray color. Available in 18.9 Liter (5-gallon) pails.
GreenScapes Bulk Sedum Cuttings are ½ - 2 ½ inch long spontaneously rooting stems available in a wide variety of sedums suitable for low-cost planting of extensive green roofs, over planting of plug installations, repair of damaged areas and filling in of sparse areas on extensive green roofs.
COREFLASH NR is a nominal 60 mil (1.5 mm) thick non-reinforced solid white thermoplastic flashing membrane with excellent UV, tear, puncture and flame resistance. COREFLASH NR is also resistant to most forms of fungus, algae and micro-biological attack.
Setting the standard for waterproofing membrane strength, durability and performance for more then 50 years. COREFLEX consists of a thermoplastic membrane integrally bonded to a proprietary Active Polymer Core (APC) layer. Combined with fully welded seams, this provides the ultimate waterproofing protection. Whether your project requires ...
The next generation of waterstop that expands upon contact with water to form a positive seal to stop water ingress through cast-in-place concrete construction joints and around pipe penetrations. Through the use of the patented XP technology, WATERSTOP XP is proven effective in a wide range of contaminated environments.
A single-component, trowel-grade moisture cured polyurethane mastic, M-2000 LIQUID FLASHING is used with CETCO Waterproofing Systems to detail primarily at membrane terminations, around horizontal deck penetrations and transitions, over grouted concrete form-tie holes, and provide fillets to inside wall corners. Available in 18.9 Liter (5-gallon) ...
A elastomeric waterproof membrane, LDC 60 cures to form a seamless barrier that forms tenacious bond to concrete to prevent lateral water migration. The inherent toughness and elasticity of LDC 60 enables it to bridge small structural or shrinkage cracks which may develop in the substrate.
A three-part prefabricated sheet drain composite consisting of a 3-dimensional polypropylene formed dimple core covered with a non-woven polypropylenefilter fabric bonded to one-side and a polymeric film bonded to the other. The formed-dimple core provides compressive strength and collects water for flow to drainage discharge pipes.