Health And Safety Equipment Available In Bhutan
-
Manufactured by DelAgua Groupbased in UNITED KINGDOM
The DelAgua Dual Incubator PLUS Kit is the next step in flexibility for the DelAgua Water Test Kit Range. The Dual Incubator, designed for microbiological water monitoring via detection of indicator organisms for E. coli, cholera, salmonella and other faecal water borne pathogens, is the most popular portable water testing system in the developing world. Built with an internal battery, it is ...
-
Manufactured by Mikunikikai Ltdbased in JAPAN
Reverse osmosis •Boosters •Critical filtration •Central cooling •Boiler water feed •Spray cleaning •Sprinkler systems •Derusting water feed •Withstand pressure test systems •Felt ...
-
Manufactured by Acrison, Inc.based in USA
The Model 403 Series of 'Weight-Loss-Differential' Weigh Feeders utilize Overhead type weighing systems specifically designed by Acrison for continuous or batch weighing of dry solids or liquids on a 'weight-loss' basis. Model 403 Weighing Systems are technologically advanced lever mechanisms (scales) utilizing Acrison designed and manufactured stainless steel flexures for all pivotal ...
-
based in USA
Accell Clean SWA is a biodegradable heavy-duty cleaning agent designed for cleaning oil-contaminated surfaces, including contaminated shorelines, mangroves or sea grasses resulting from oil spills. SWA accelerates the natural bio-degradation of organic contaminates and can also eliminate odors and create a safer environment in the bilge area as volatiles are decreased and/or eliminated. Test ...
-
Manufactured by Delta OHM - member of the GHM GROUPbased in ITALY
HD48.. and HD49.. series of transmitters measure temperature, relative humidity and dew point. Versions with only standard analog output or with only RS485 output with MODBUS‑RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC. The ...
-
Manufactured by Silixa Ltdbased in UNITED KINGDOM
Enabling true acoustic measurements with finer spatial resolution, wider coverage and lower noise in environments where no other sensor can go. The intelligent Distributed Acoustic Sensor (iDAS) uses the phase of Rayleigh backscattered light to demodulate dynamic strain events along an optical fibre. The iDAS can measure changes in local axial strain to picometre (1 x 10 -12) resolution and has ...
-
Manufactured by Hunan Great Steel Pipe Co., Ltd.based in CHINA
Shape: Hollow Sections: Square, Rectangular, Round, Triangular, Hexagonal, Eliptical Hollow sections ...
-
Manufactured by Hypervac Technologiesbased in CANADA
Now the first duct truck with the easy-lift open and close bag door. The H2 Air Duct Cleaning Truck Mount is a brand new system for High powered air duct cleaning, completely redesigned for modern duct cleaning, with the same breakthrough technology as the H1. Far more efficient, user friendly, offers better suction and most important it is far more profitable to ...
-
Manufactured by Hunan Great Steel Pipe Co., Ltd.based in CHINA
Shape: Hollow Sections: Square, Rectangular, Round, Triangular, Hexagonal, Eliptical Hollow sections ...
-
Manufactured by Cirrus Research plcbased in UNITED KINGDOM
External Noise Sensor with 4-20mA Output for a range of noise monitoring applications. Integrated noise measurement outdoor noise microphone with a 4-20mA current loop. Unlike a conventional Sound Level Meter, the Noise Sensor simply converts the noise level in decibels into an industry standard 4-20mA ...
-
Manufactured by Lighthouse Worldwide Solutionsbased in USA
The Lighthouse ScanAir Pro System is a particle counter based HEPA/ULPA filter scanning system. It is the only easy and lightweight method for testing and scanning PTFE, fiberglass and other filter media for leaks. Incorporating an ergonomic lightweight-scanning probe with touchscreen user interface, the ScanAir Pro System also includes a SOLAIR portable particle counter and a dual-port diluter ...
-
Manufactured by EDT directIONbased in UNITED KINGDOM
In busy laboratories it is recommended that a calibration is performed at least once per day or preferably twice. A two point calibration is usually performed, either pH7 and pH4 buffer or pH7 and pH 10 depending on whether the sample is acidic or alkaline. ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
A high quality infrared fixed-point detector that delivers dependable detection of freon gases. Available for detecting a range of different refrigerant gases and also sulphur hexafluoride (SF6), the Crowcon F-Gas Detector can be connected to any control system that accepts an analogue signal. Housed within an IP54 rugged enclosure, the F-Gas Detector is suitable for use in non-hazardous areas ...
-
Manufactured by RadComm Systemsbased in CANADA
The RADLAB was developed specifically for (but not limited to) the metal industries to provide the highest degree of accuracy in measured samples for its specific radiological ...
-
Manufactured by Vertek a Division of ARAbased in USA
The S4 Push System is outfitted for 10cm2 and 15cm2 diameter CPT products, provides 20 ton push capacity and includes mechanical rod clamp. Hydraulic supply hoses are standard quick connect for easy set-up and take down. Anchor system delivers up to seven feet of reaction depth and is deployable in minutes. The S4 attaches to variety of common equipment. Also available attached to custom trailer ...
-
Manufactured by Vertek a Division of ARAbased in USA
Rugged and Reliable Vertek’s Digital Cones provide simple, easy-to-use CPT measurements in a compact system. Since analog-to-digital conversion is preformed downhole, the bulkiness of cabling and uphole electronics are reduced, and noise problems associated with cable length and low voltage signals of analog systems are eliminated. Vertek’s 10 conductor cable with LEMO type connectors ...
-
Manufactured by Vertek a Division of ARAbased in USA
Vertek’s patented Soil Sampler is built for reliable, cost-effective retrieval of soil samples in difficult geologies and is designed to be deployed by most common CPT equipment. ...
-
Manufactured by Dagan Agricultural Automation Ltdbased in ISRAEL
6.2.1: Water tank including a controlled increase pressure system utilizing a back up capability for greenhouses and animal ...
-
Manufactured by G.R.A.S. Sound & Vibration A/Sbased in DENMARK
Through a close cooperation with our customers, we know that data-safety is highly important because the costs related to unsuited and unreliable sensors may determine whether your project turns into a success or not. For our users, data safety translates directly into requests for easier microphone selection, simple system configuration and reduction of measurement errors. To meet these ...
-
Manufactured by G.R.A.S. Sound & Vibration A/Sbased in DENMARK
Through a close cooperation with our customers, we know that data-safety is highly important because the costs related to unsuited and unreliable sensors may determine whether your project turns into a success or not. For our users, data safety translates directly into requests for easier microphone selection, simple system configuration and reduction of measurement errors. To meet these ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you