Health & Safety Equipment in Ontario

2251 Results found

Current filtering criteria

You can remove a filter by clicking on the x

IATA Shipper`s Declaration

by The Compliance Center (ICC)     Office in Mississauga, ONTARIO (CANADA)

Our air declaration form complies with the requirements set in IATA DGR, section 8. Mandatory for all air shipments of hazardous materials.

Model Scavenger Series - Portable Fume/Particle Extractors

by Airfiltronix Corporation     Distributor in Mississauga, ONTARIO (CANADA)

The Scavenger Series portable fume/particle extractors are an inexpensive solution to all small scale, yet potentially hazardous, fume and particle problems. These powerful yet quiet, fully portable systems are ideal for use in work spaces that are too small for conventional fume hoods. They can be used on the table top or wall mounted. The unit ...

PULSCO - Vent Silencer

by PULSCO Inc.     Distributor in Hamilton, ONTARIO (CANADA)

PULSCO’s Vent Silencers provide the solution to high intensity, broadband noise associated with pressure relief systems. At a given set of operating conditions, each silencer is designed to meet the required noise level criteria specific to customer application.


by Scentroid, a Division of IDES Canada.     based in Markham, ONTARIO (CANADA)

Scentroid SS400 is an advance mobile 6 station portable olfactometer. The SS400 is used to assess odour concentration from a sample using 2 presentation modes (Binary or Yes/No) by fulfilling the requirements of the EN13725 and VDI 3881 standards. 1- Odour Analysis to All Standards2-Portability Without Compromise3-Portable Air Supply UnitSS400 ...

Donaldson Torit PowerCore - Model TG Series - Dust Collectors

by Donaldson Torit     Distributor in ONTARIO (CANADA)

Just how small is the Torit PowerCore TG Series collector? This collector, designed for thermally generated dust, is in a category by itself with a footprint up to 65% smaller than most cartridge collectors and smarter technology housed in the widest range of completely packaged and assembled units available up to 10,000 cfm.

Industrial Blow Off Silencer / Vent Silencer

by E.I.Williams Industries     based in Ajax, ONTARIO (CANADA)

In cases of blow off silencers regarding highly compressed vapour or gas in an open air set, kinetic energy is formed with high amplitude pressure fluctuations. The result of this is a very high sound pressure level that needs to be reduced. It is this type of emission that can effectively be limited with a blow off silencer, vent silencer, ...

Model PGIS-2 - Portable Gamma-Ray Spectrometer

by Pico Envirotec Inc.     based in Concord, ONTARIO (CANADA)

The instrument is designed for portable and mobile spectrometry surveys  in a variety of environments. The PGIS-2 is based on advanced microprocessor and mobile technologies,  consists of a detector unit, integrated with GPS, and a data logger unit (PEICore)  based on state-of-the-art portable devices, such as a smart-phone, a ...

PCB in Soil Pocket Colorimeter II Test Kit

by Hach Company - a subsidiary of Danaher Corporation     Office in Mississauga, ONTARIO (CANADA)

PCB in Soil Pocket Colorimeter II Analysis System, 1, 5, 10, 50 ppm thresholds, with immunoassay reagent set (18 Tests), manual, and carrying case.

Scentroid - Model SS600 - Six Station Automated Olfactometer Laboratory

by Scentroid, a Division of IDES Canada.     based in Markham, ONTARIO (CANADA)

Scentroid SS600 is the world’s most advanced stationary, dynamic, and fully automated olfactometer. It is capable of odour measurement and analysis to all international olfactometery standards:

ENDETEC - Pressure Sensors & Modules

by ENDETEC     based in Kingston, ONTARIO (CANADA)

ENDETEC micro Pirani gauges are based on the same MTCS device. Different Pirani microwire-to-wall distance are proposed using a micromachining silicon cap.

DURAGRATE - Model HM-1400 TRX - Total Mercury Analyzer System

by DURAG GmbH     Distributor in ONTARIO (CANADA)

Extractive Automatic Measuring System (AMS) for continuous total mercury monitoring (CMM) in stack gas or process gas.

Charge Bucket System

by RadComm Systems     based in Oakville, ONTARIO (CANADA)

The RC Charge Bucket Radiation Detection Systems are RadComm’s most advanced charge bucket radiation monitoring system specifically designed to detect radioactive material contained in a moving grapple loaded with scrap metal/material. The innovative design of the RC CHARGE BUCKET is the result of over 15 years of engineering design and ...

Model 381-NMS - Permanent Noise Monitoring System

by Larson Davis, a division of PCB Piezotronics     Office in ONTARIO (CANADA)

An Integrated Hardware & Software System with Digital Communication and an Open Interface for Long Term Noise Monitoring Applications. The Model 831-NMS permanent noise monitoring system is designed for long term monitoring around airports, industrial facilities, motorsport complexes, wind farms, mining operations, and within the general ...

ATI - Model Q45S - Wet H2S Gas Detector

by Analytical Technology, Inc. (ATI)     Distributor in ONTARIO (CANADA)

Odor control in wastewater treatment plants and sewage collection systems often requires the use of scrubber systems.  Many of these scrubbers employ a wet process using a hypochlorite solution to remove hydrogen sulfide (H2S) from air streams prior to discharge.  Monitoring the hydrogen sulfide in both inlet and discharge air has ...

Biomedical Waste Applications

by Eco Waste Solutions     based in Burlington, ONTARIO (CANADA)

In addition to healthcare facilities in remote communities, Eco Waste products are suitable for treating biomedical waste generated on-site at remote industrial operations.

Scentinal - Model SL50 - Air Quality Monitoring Station

by Scentroid, a Division of IDES Canada.     based in Markham, ONTARIO (CANADA)

Scentinal provides ambient odour emission monitoring based on high accuracy (ppb level) detection of odorous gases such as H2S, Ammonia, VOCs, and SO2. The flexible intelligent station allows live monitoring of plant emissions on Scentroid’s cloud servers. Odour emission is reported in OU/m3 based on correlation determined based on periodic ...

Dexsil - Model L2000DX PCB (LP-200) - Chloride Analyzer System

by Dexsil Corporation     Distributor in ONTARIO (CANADA)

The L2000DX relies on the same basic chemistry as the Clor-N-Oil test kits, however instead of a colorimetric reaction, the L2000DX uses an ion specific electrode to quantify the contamination in the sample. Sample analysis is available for transformer oils, soils, water and surface wipes. The usable measurement range for oils and soils is 2 to ...

SSP 20 Solvent Saver - Printing

by Maratek Environmental Inc.     based in Bolton, ONTARIO (CANADA)

The Solvent Saver Printing (SSP 20) is designed with a multi-stage vacuum distillation process that separates solvent into its components at lower-than-boiling point temperatures. Operation is fully automatic via a PLC controller with a color LCD touch screen interface.

Microtox - Model M500 - Biosensor-Based Measurement System

by Modern Water - Monitoring Division     Distributor in ONTARIO (CANADA)

The Microtox Model 500 (M500) analyser is a laboratory-based, temperature-controlled, self-calibrating photometer that measures acute toxicity. Microtox M500 is a biosensor-based measurement system that uses bioluminescence technology to monitor for either accidental or deliberate contamination of both water supplies and waste water. With over ...

Hypersol-Macronet - Model MN100 - Sorption / Separation of Hydrophobic Organic Species - Anionic Matrix

by Purolite Corporation     Office in ONTARIO (CANADA)

Purolite Macronets are special sorbents, highly and rigidly cross-linked in the swollen state, and thus characterized by very high internal surface areas, approaching those of activated carbons. As a result of their unique manufacturing technology, they will retain their swollen-state porosity, and hence show little or no change in swelling with ...

Need help finding the right suppliers?

Let the XPRTs do the work for you