Health And Safety Equipment With Upstream And Downstream Oil And Gas Monitoring Applications Near New Brunswick
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
Specifically developed for sand monitoring in the oil and gas industry, the iSensys SandAlert monitor is a sand and particle monitor that is ideal wherever you need to keep wells producing efficiently. Sand production for oil and gas operators is an increasing problem and can cause catastrophic damage to well and rig equipment. The SandAlert provides robust, dependable sand monitoring data, so ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
Quantum 2 by Pulsar Measurement is designed to be an intelligent and sophisticated pump controller. Featuring unique intelligent pumping, with 'time to spill' alarms and DATEM echo discrimination to provide solid performance and sophisticated level measurement. The unit has the ability to reset pumps automatically and can be used in those high-risk areas to enhance site management. Featuring a ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
The dBR radar series of transducers from Pulsar Measurement are a range of Radar level sensors that are ideal for difficult applications such as high temperatures, applications subject to foam or atmospheric changes, or applications with harsh chemicals that give off vapors. Radar level sensors from Pulsar Measurement are complimentary to the Ultrasonic range of sensors and gives end users a ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
The IMP range of non-contacting level sensors from Pulsar Measurement are designed to be used wherever you need an accurate and reliable level indication. The unique digital echo process techniques featured in the IMP range of level sensors mean the units are perfect for slurries, liquids, or anywhere where you need a display giving you a level indication or analog output to interface with your ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
The Quantum 3 is a full-featured pump controller, designed to offer intelligent pumping for small pump stations, without costly PLC programming. Featuring a unique 'time to spill' alarm, it offers utilities and plant operators adequate time to react to prevent pump stations from spilling into local water sources. The unit offers the ability to add up to 4 FlowPulse non-invasive pipe flow sensors, ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
Sand monitoring in the oil and gas industry is absolutely paramount to keep wells producing efficiently and at capacity. Excessive solid production in the oil stream can cause catastrophic damage to well and rig equipment. The iSensys SandAlert Portable Sand Monitor has been designed to give oil and gas producers robust and dependable sand monitoring solutions. The Portable Sand Monitor is fitted ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
The dB Transducer series from Pulsar Measurement is a range of level sensors for wastewater and industrial environments. Ranging from 3 m (9.8 f) to 50 m (164 ft) all of our ultrasonic level sensors provide a reliable level, volume, open channel flow, pump control, and differential level measurement for both liquid and solid applications. The dB ultrasonic level transducer range benefits from ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
The Zenith pump controller by Pulsar Measurement is a high specification full-featured pump station management system. The combination of ultrasonic measurement and control and monitoring of pumps and other control functions makes it possible for utility companies across the globe to reduce the use of expensive PLCs and provides savings when it comes to programming costly logic and pump control ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
Gaining accurate flow measurement inside a pipe can sometimes be tricky. The Greyline DFM 6.1 Doppler Flow Meter offers clamp-on pipe flow measurement from outside the pipe. Its Doppler technology makes it perfect for 'difficult' liquids, or liquids with suspended solids such as wastewater, slurries, sludge, chemicals, viscous liquids, and abrasives. The non-invasive Doppler flow meter fits any ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
Accurately measure the flow rate of clean, non-aerated liquids like water, chemicals, and oils in full pipes. Ultrasonic transducers mount on the outside of a pipe without shutting down flow. Flow rate is displayed on the large, backlit display along with totalizer and signal strength. Use the built-in control relays for flow alarms or flow proportionate pulse. Connect the isolated 4-20mA output ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
The PulsarGuard acoustic sensor range offers reliable solids flow detection, it detects structure-borne acoustic signals caused by the movement of material. This movement then causes impacts and frictional contact within a containment (e.g. the inside of a pipe). The sensor detects and reacts instantly to changes in solids flow and warns of blockages and foreign object detection, high flow, low ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
The area-velocity flow measurement method is the most common method of all flow measurements. The Greyline Area-Velocity Flow Meter uses a submerged ultrasonic sensor measuring both level and velocity of flowing liquid to calculate flow measurement in an open channel or pipe. The sensors are mounted either inside a pipe or at the bottom of a channel. Just enter the pipe diameter or channel ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
It's ideal for flow troubleshooting, balancing and checking performance of permanent flow meters. The new PDFM 5.1 is fast and easy to operate – you can mount the sensor on the outside of a pipe in less than a minute. Use the built-in keypad and calibration menu to set up the flowmeter for your application. The PDFM 5 works on any liquid containing bubbles or solids and is recommended for ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
The Ultra 4 is a fully functional advanced controller for level, flow, volume, and pump control. MCERTS Class 1 certified, it offers open channel flow measurement for stormwater overflows and event duration monitoring. The multifunctional display offers the ability to be able to view trend graphs on-screen and get a glance at how levels have changed over time. When combined with the dB3 with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you