Radiation Safety Equipment For Health And Safety Available In France
-
PremiumManufactured by Emcel Filters Limitedbased in UNITED KINGDOM
Designed to meet the performance requirements of NF 0153/1. Rectangular Containment Systems: Available in a range of constructions: 316/304L Stainless Steel or Painted Mild Steel, EMCEL containment housings can be designed and manufactured to suit almost any ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The self-developed PMMS-5000 Atmospheric Heavy Metal Analyzer is according to US EPA IO-3.3 standard method. It has realized accurate measurement for the content of heavy metal components, including plumbum,mercury,cadmium,chromium and arsenic in the atmosphere through XRF Non-destructive Detection Technology and Automatic Enrichment technology. It can be widely applied in ambient air quality ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
RanidPort Mobile is advanced spectrometric radiological portal monitor designed for mobile use in cars, boats, helicopters or airplanes. RanidPort Mobile is only truly portable spectroscopy radiation portal monitor available at this size and it is easy to transport in its own rugged detection and transportation case. RanidPort’s high volume Nal(Tl) scintillation detector ensures the rapid ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS 812 consists of a real Rotem Ram Gene with added STS electronics STS. The instrument detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the instrument close to and slowly over the surface, as would be done with a real Ram Gene when used by a skilled operator. Too fast, or too far ...
-
PremiumManufactured by CETCObased in USA
QUIK-SOLID Mats are a high-performing yet lower cost alternative to other absorbent fabric products that are used in the hazardous waste or nuclear waste disposal industry. QUIK-SOLID Mats are made with polyester fabric layers bonded together with a special polyolefin adhesive. The QUIK-SOLID granular absorbent polymer is imbedded between the layers of fabric and the entire laminate structure is ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS CM11 simulator is a fully functioning real Thermo CM11 that has been modified for use in nuclear contamination training. The unit retains its full range of functions but has additional electronics inside the meter and operates with a simulated STS BP19/DP11 style probe. The monitor which is used for verification of decontamination and identification of contaminated hands and clothing is ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS DP6 is a real Thermo probe , but with a STS gas detection head rather than a real detector. STS electronics installed within the host instrument power the gas detection system and the signal generated is displayed on the host instrument as counts. The Probe detects the presence of the STS LS1 liquid simulant spray placed on surfaces and ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
RHT4nl RH/Precision Air Temp Sensors (10k thermistor). Fitted with 2m cable. Both mounted in same solar radiation shield. RH accuracy +/- 2% RH, 5 to 95%. Precision Thermistor Temp Sensor accuracy (+/-0.2 deg C, -30 to 70 deg C). Temperature output non-linear. Supported for use with GP1 Data Logger ...
-
PremiumManufactured by Advanced Equipment and Services, Incbased in USA
Pre-treatment is important when working with RO and nanofiltration (NF) membranes due to the nature of their spiral wound design. The material is engineered in such a fashion to allow only one way flow through the system. As such the spiral wound design doesn't allow for backpulsing with water or air agitation to scour its surface and remove solids. Since accumulated material cannot be removed ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS EP15 is a replica of a real EP15 probe , but with a STS gas detection head rather than a real detector. STS electronics installed within the host instrument power the gas detection system and the signal generated is displayed on the host instrument as counts. The Probe detects the presence of the STS LS1 liquid stimulant spray placed on surfaces and ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
RadTRACE is a gamma survey meter dedicated to workers and non-specialized staff subject to radiation exposure in professional ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS HP210 is a simulated shielded pancake probe with a STS gas detection head rather than a real detector. STS electronics installed within the host instrument power the gas detection system and the signal generated is displayed on the host instrument as counts. The Probe detects the presence of the STS LS1 liquid simulant spray placed on surfaces and ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Thermo Electra Simulator is a real Thermo Fisher Electra which houses the STS circuitry to convert the instrument into a simulator. To do this the HV board is removed and the existing probe connector and cable are replaced so that it will operate with any STS simulated probe. The Electra retains its full functions including audio output, backlight and user setable alarms and other ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS SPA6 probe is in cylindrical form, 67mm diameter, and 200mm long. It differs from other STS probes, in that it is a self contained detection and interface unit, and can therefore be connected direct to real ratemeters. It contains a six cell MN1500 battery pack which this gives about 10 to 15 hours of operation. The probe is designed to replicate the particular properties of radioactive ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Safe-FH40G series of simulators. The FH40G is available as a hand held unit or mounted on a telepole for distance working. The unit developed by STS utilises the STS Safe-Series technology to safely replicate radiation fields. A radiofrequency source, such as those shown, is placed in the training area and the simulated unit activated, the instrument then functions exactly as the real ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Ludlum Model 12 is upgraded with added electronics and cable connector so that it will operate with any STS simulated probe. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the probe close to and slowly over the surface, as would be done with a real probe when used by ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
SaphyRAD is a multiprobe handheld device used for the detection of alpha & beta radioactive contaminations. SaphyRAD multiprobe alpha & beta contamination meter has been developed to meet all needs of contamination control for multiple markets such as the nuclear and NORM industries, medical structures & first responders, thanks to its integrated nuclide library. Its ergonomic ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q’s Mobile Air Sampling Station can be supplied with controllable flow rates from as little as 2 SCCM up to, as high as 200 SLPM. The unit can be equipped as either a single or dual flow sampling system – you make the call. Have an existing Stack Flow Rate Monitor? HI-Q’s MASS Unit can easily be linked together with an existing stack-flow monitor to achieve real-time ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Safe-PocketSource simulator is a simulated radiation source designed to aid the tuition of workers in the nuclear industry in safe practices and in understanding the nature and mechanics of ionising radiation. The instrument operates using an STS radio frequency emitter to generate a field which can be detected by any of the Safe-Series monitors and postal detectors with the resultant ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
Long a world leader in optical meteorological sensors OSI now provides automated weather stations (AWS) built around the OWI-431 DSP WIVIS and OWI-651 Low Power WIVIS. Select the OWI-431 based system for permanent AC powered stations. Select the OWI-651 for battery powered or solar applications. In either case, you get an advanced Weather Identifier and Visibility Sensor (WIVIS) with other ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you