Radiation Safety Equipment For Health And Safety Available In Haiti
-
PremiumManufactured by CETCObased in USA
QUIK-SOLID Mats are a high-performing yet lower cost alternative to other absorbent fabric products that are used in the hazardous waste or nuclear waste disposal industry. QUIK-SOLID Mats are made with polyester fabric layers bonded together with a special polyolefin adhesive. The QUIK-SOLID granular absorbent polymer is imbedded between the layers of fabric and the entire laminate structure is ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Reliable temperature measurement in the snow. The snow temperature sensor (Pt100) is a highly durable platinum resistance temperature detector type Pt100. It detects the snow temperature reliably and exactly. ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
RHT4nl RH/Precision Air Temp Sensors (10k thermistor). Fitted with 2m cable. Both mounted in same solar radiation shield. RH accuracy +/- 2% RH, 5 to 95%. Precision Thermistor Temp Sensor accuracy (+/-0.2 deg C, -30 to 70 deg C). Temperature output non-linear. Supported for use with GP1 Data Logger ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The new STS Safe-Series range brings new technology into handheld simulation to provide the most realistic simulators available today. A unique radio system produces both a near isotropic field pattern from the source and from the detector. A good representation of the inverse square law and attenuation of different materials adds to the realistic response. Available now is the Safe-Series 6150AD ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
Skydose is an operational dosimetry system, designed to measure & monitor, in real time, the ambient dose level received by response teams in high exposure areas. The operational dosimetry system Skydose consists in eight Saphydose γi RT teledosimeters, one Personal Digital Assistant (PDA), one Easydose configuration software, one Saphyr portable reader, as well as one to three RT-ZB05 ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Ludlum Model 12 is upgraded with added electronics and cable connector so that it will operate with any STS simulated probe. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the probe close to and slowly over the surface, as would be done with a real probe when used by ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The Ludlum 3000 is the latest in the list of instruments to be simulated for nuclear training by STS. In this instance the meter is a real and unmodified Ludlum 3000 connected to which is an STS smart probe. The smartprobe houses all of the interface electronics and batteries that would normally be built into a simulated meter. This means that the user can take any unmodified Ludlum 3000 and ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS 43-5 is a real Ludlum probe, but with a STS gas detection head rather than a real detector. STS electronics installed within the host instrument power the gas detection system and the signal generated is displayed on the host instrument as counts. The Probe detects the presence of the STS LS1 liquid simulant spray placed on surfaces and ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
The SaphyRAD MS is a multiprobe survey meter with gamma dose rate measurement and contamination detection functions designed for military ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS DP2 is a real Thermo DP2 probe, but with a STS gas detection head rather than a real detector. STS electronics installed within the host instrument power the gas detection system and the signal generated is displayed on the host instrument as counts. The Probe detects the presence of the STS LS1 liquid simulant spray placed on surfaces and ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS AP3 is a real AP3 probe , but with a STS gas detection head rather than a real detector. STS electronics installed within the host instrument power the gas detection system and the signal generated is displayed on the host instrument as counts. The Probe detects the presence of the STS LS1 liquid simulant spray placed on surfaces and clothing. ...
-
PremiumManufactured by Advanced Equipment and Services, Incbased in USA
Pre-treatment is important when working with RO and nanofiltration (NF) membranes due to the nature of their spiral wound design. The material is engineered in such a fashion to allow only one way flow through the system. As such the spiral wound design doesn't allow for backpulsing with water or air agitation to scour its surface and remove solids. Since accumulated material cannot be removed ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS BP4 is a replica of a real BP4 probe , but with a STS gas detection head rather than a real detector. STS electronics installed within the host instrument power the gas detection system and the signal generated is displayed on the host instrument as counts. The Probe detects the presence of the STS LS1 liquid simulant spray placed on surfaces and ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Double-beam spectrophotometer with five variable slit widths and double monochromator for reducing stray light for simultaneous measurement of sample and reference signal, ideal for samples with particularly high absorptions and higher stray light ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS 6150ADK probe is a large area probe, 150mm wide, and 200mm long. It differs from other STS probes, in that it is self contained detection and interface unit, and can therefore be connected direct to real ratemeters. It contains a six cell MN1500 battery pack which this gives about 10 hours of operation. The probe is designed to replicate the particular properties of radioactive surface ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
For more than 25 years MCZ manufactures measuring stations and test vans for the most diverse tasks. Main operational areas are measurements in the range immission, emission, water, meteorology and radiation protection. All systems are conceived more or less individual systems after customer default and setting of ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Double-beam spectrophotometer with fixed slit width for simultaneous measurement of sample and reference ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
The BAB air monitoring beacon is used in nuclear facilities for a continuous surveillance of alpha; & beta artificial radioactive aerosols concentration with radon progenies and ambient gamma ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Survey-Safe simulator is a simulated radiation survey meter designed to aid the tuition of workers in the nuclear industry in safe practices and in understanding the nature and mechanics of ionising radiation. The instrument operates using an STS radio frequency detection head which detects the presence of a simulated radiation field with the resultant reading displayed on the LCD Display ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Thermo Electra Simulator is a real Thermo Fisher Electra which houses the STS circuitry to convert the instrument into a simulator. To do this the HV board is removed and the existing probe connector and cable are replaced so that it will operate with any STS simulated probe. The Electra retains its full functions including audio output, backlight and user setable alarms and other ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you