We couldn't find any radiation safety equipment suppliers or service providers located in Mauritius
Here is a list of equipment results with suppliers serving Mauritius
Radiation Safety Equipment For Health And Safety Available In Mauritius
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The UVP Incubator provides precise temperature control and uniformity for the incubation of biological assays, fungal, bacterial cultures, eggs and other samples up to 68 °C. The instrument is equipped with built-in overhead shortwave 254nm UV tubes for sterilization of the incubation chamber between experiments. By utilizing the germicidal properties of UV light eliminating viable fungi, ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Voltammetry, being highly specific, can deal with high salt loads. Organic contamination of a sample, however, can interfere with the VA trace analysis of heavy metals. The 909 UV Digester quickly and effectively breaks down organic molecules by UV photolysis, thereby enabling reliable determinations. ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Double-beam spectrophotometer with five variable slit widths for the simultaneous measurement of sample and reference signal in a wide measurement range from 185-1200 nm, optimal for the measurement of solutions and solids with highest demands on optical ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS EP15 is a replica of a real EP15 probe , but with a STS gas detection head rather than a real detector. STS electronics installed within the host instrument power the gas detection system and the signal generated is displayed on the host instrument as counts. The Probe detects the presence of the STS LS1 liquid stimulant spray placed on surfaces and ...
-
PremiumManufactured by Advanced Equipment and Services, Incbased in USA
Pre-treatment is important when working with RO and nanofiltration (NF) membranes due to the nature of their spiral wound design. The material is engineered in such a fashion to allow only one way flow through the system. As such the spiral wound design doesn't allow for backpulsing with water or air agitation to scour its surface and remove solids. Since accumulated material cannot be removed ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Safe-MiniSource simulator is a simulated radiation source designed to aid the tuition of workers in the nuclear industry in safe practices and in understanding the nature and mechanics of ionising radiation. The instrument operates using an STS radio frequency emitter to generate a field which can be detected by the Survey-Safe or Dosi-Safe with the resultant reading displayed on the LCD ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Double-beam spectrophotometer with fixed slit width for simultaneous measurement of sample and reference ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Thermo Electra Simulator is a real Thermo Fisher Electra which houses the STS circuitry to convert the instrument into a simulator. To do this the HV board is removed and the existing probe connector and cable are replaced so that it will operate with any STS simulated probe. The Electra retains its full functions including audio output, backlight and user setable alarms and other ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Ludlum Model 12 is upgraded with added electronics and cable connector so that it will operate with any STS simulated probe. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the probe close to and slowly over the surface, as would be done with a real probe when used by ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The Contamination monitor simulator is a wall mounted mains powered unit that replicates monitors such as the Thermo CM9/11. The system features a DP6 style frisking probe with an automatic background check and monitoring activated by removing the probe from the cradle. The unit features a full colour 7” touch screen with counts displayed and a bar graph visual indicator for both Alpha and Beta ...
-
PremiumManufactured by Daliform Group Srlbased in ITALY
Iglù® is a market leading product that was created and patented for the realisation of sanitary spaces, ventilated cavities, under-floor cavities, ventilated floors and roofs during the construction and restructuring of civil and industrial buildings. This result of an ingenious idea dating back to 1993 considerably improved building methods. The innovative capacity of ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
RadTRACE is a gamma survey meter dedicated to workers and non-specialized staff subject to radiation exposure in professional ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Ludlum Model 3 is upgraded with added electronics and cable connector so that it will operate with any STS simulated probe. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the probe close to and slowly over the surface, as would be done with a real probe when used by a ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS CM11 simulator is a fully functioning real Thermo CM11 that has been modified for use in nuclear contamination training. The unit retains its full range of functions but has additional electronics inside the meter and operates with a simulated STS BP19/DP11 style probe. The monitor which is used for verification of decontamination and identification of contaminated hands and clothing is ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Safe-PocketSource simulator is a simulated radiation source designed to aid the tuition of workers in the nuclear industry in safe practices and in understanding the nature and mechanics of ionising radiation. The instrument operates using an STS radio frequency emitter to generate a field which can be detected by any of the Safe-Series monitors and postal detectors with the resultant ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
Skydose is an operational dosimetry system, designed to measure & monitor, in real time, the ambient dose level received by response teams in high exposure areas. The operational dosimetry system Skydose consists in eight Saphydose γi RT teledosimeters, one Personal Digital Assistant (PDA), one Easydose configuration software, one Saphyr portable reader, as well as one to three RT-ZB05 ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS BP4 is a replica of a real BP4 probe , but with a STS gas detection head rather than a real detector. STS electronics installed within the host instrument power the gas detection system and the signal generated is displayed on the host instrument as counts. The Probe detects the presence of the STS LS1 liquid simulant spray placed on surfaces and ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Double-beam spectrophotometer with five variable slit widths and double monochromator for reducing stray light for simultaneous measurement of sample and reference signal, ideal for samples with particularly high absorptions and higher stray light ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
Long a world leader in optical meteorological sensors OSI now provides automated weather stations (AWS) built around the OWI-431 DSP WIVIS and OWI-651 Low Power WIVIS. Select the OWI-431 based system for permanent AC powered stations. Select the OWI-651 for battery powered or solar applications. In either case, you get an advanced Weather Identifier and Visibility Sensor (WIVIS) with other ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
The BF5 Sunshine Sensor is a versatile, multi-purpose solar radiation sensor. It uses an array of photodiodes with a unique computer-generated shading pattern to measure incident solar radiation. A microprocessor calculates the global and diffuse components of the radiation and determines the sunshine state. Two analogue voltage outputs give global and diffuse radiation, from which direct and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you