Radioactive Contamination Equipment For Health And Safety Available In United Kingdom
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS RadEye Simulation Probes consist of a simulated probe housing STS electronics and cable connector so that it will operate with a real Thermo RadEye SX meter. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the probe close to and slowly over the surface, as would be ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS 812 consists of a real Rotem Ram Gene with added STS electronics STS. The instrument detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the instrument close to and slowly over the surface, as would be done with a real Ram Gene when used by a skilled operator. Too fast, or too far ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
SaphyRAD is a multiprobe handheld device used for the detection of alpha & beta radioactive contaminations. SaphyRAD multiprobe alpha & beta contamination meter has been developed to meet all needs of contamination control for multiple markets such as the nuclear and NORM industries, medical structures & first responders, thanks to its integrated nuclide library. Its ergonomic ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Ludlum Model 3 is upgraded with added electronics and cable connector so that it will operate with any STS simulated probe. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the probe close to and slowly over the surface, as would be done with a real probe when used by a ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS Thermo Electra Simulator is a real Thermo Fisher Electra which houses the STS circuitry to convert the instrument into a simulator. To do this the HV board is removed and the existing probe connector and cable are replaced so that it will operate with any STS simulated probe. The Electra retains its full functions including audio output, backlight and user setable alarms and other ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS 6150ADK probe is a large area probe, 150mm wide, and 200mm long. It differs from other STS probes, in that it is self contained detection and interface unit, and can therefore be connected direct to real ratemeters. It contains a six cell MN1500 battery pack which this gives about 10 hours of operation. The probe is designed to replicate the particular properties of radioactive surface ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS 802 consists of a real Thermo Fisher Mini Instruments 900 series with added electronics and cable connector so that it will operate with any STS simulated probe. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
Use of Radiation Simulants: These materials are supplied as part of the Safe Training Systems Ltd radiation simulation system, and must not be used for any other purpose, nor be substituted by any other material. Such substitution will render any guarantee null and void. Accidental skin contact by either LS1 or SS4 is very unlikely to result in any irritation or other effect, but it is ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS CM11 simulator is a fully functioning real Thermo CM11 that has been modified for use in nuclear contamination training. The unit retains its full range of functions but has additional electronics inside the meter and operates with a simulated STS BP19/DP11 style probe. The monitor which is used for verification of decontamination and identification of contaminated hands and clothing is ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS RadEye Simulation Probes consist of a simulated probe housing STS electronics and cable connector so that it will operate with a real Thermo RadEye SX meter. This probe detects the gas given off by the STS simulant, which has been applied to the surface to be monitored. This “radiation” may be detected by passing the probe close to and slowly over the surface, as would be done ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
The STS SPA6 probe is in cylindrical form, 67mm diameter, and 200mm long. It differs from other STS probes, in that it is a self contained detection and interface unit, and can therefore be connected direct to real ratemeters. It contains a six cell MN1500 battery pack which this gives about 10 to 15 hours of operation. The probe is designed to replicate the particular properties of radioactive ...
-
Distributed by Geomatrix Earth Science Ltdbased in UNITED KINGDOM
Referred to as The Mole' the RT-60 Gamma ray borehole logging system manufactured by Radiation Solutions Inc offers a simple solution for gamma-ray measurements and natural radioisotopes assay. The RT-60 includes a BGO (Bismuth Germanium Oxide) gamma-ray detector and a complete 1024 channel gamma ray spectrometer, offering 80 cps/ IMBq for Cs-137 at lm ...
-
Manufactured by Castellex Ltdbased in UNITED KINGDOM
Designed to provide fresh air to panic rooms, bomb shelters, nuclear fallout shelters, and domestic and commercial environments subject to extremely heavy pollution, the Castellex Air 390 life support system is fitted with a top-graded H14 HEPA filter, an F7-rated pre filter and a carbon filter. ...
-
Manufactured by RadComm Systemsbased in CANADA
The RADSampler is a compact yet highly sensitive laboratory gamma spectrometer. Developed as a desktop unit it quickly and accurately analyzes of any small object to ensure it is free of radioactive contaminates. The RADSampler’s lead lined analyzer chamber virtually eliminates ambient background radiation producing ultra-clean, highly accurate test ...
-
Manufactured by SOEKS USA - Geiger Counters & Nitrate Food Testersbased in USA
The Soeks Defender Geiger Counter / Radiation Detector is designed for measuring background radiation and detecting objects, food products and building materials contaminated by radioactive ...
-
Manufactured by Soeks Francebased in FRANCE
Radiation measurement: Like the other Geiger counters in the SOEKS range, the Quantum is used to identify potential radioactive contamination in food products, water, construction materials, as well as your local environment. However, this model is for professional usage. As such, it combines twin Geiger-Muller sensor tubes for extreme accuracy of measurement. It is literally twice as sensitive ...
-
Manufactured by Gihmm GmbHbased in AUSTRIA
A significant part of the radioactivity intrudes into the human body through ingestion of food. GIHMM's COMO Contamination Monitor measures and quantifies radioactivity and identifies radioactive nuclides (radioisotopes) in food and other materials. The ease of use of COMO and its accuracy make it the ideal analysis tool for a variety of applications to identify radioactive contamination in a ...
-
Manufactured by Komar Industries Inc.based in USA
Komar's Shred-Feed Systems are capable of complete processing of all types of waste materials. These systems can reduce waste to defined piece sizes and them feed the product through to thermal or chemical destruction. These industrial shredder / auger feed combination systems are ideal for handling hazardous or special waste ...
-
Manufactured by Arrow-Tech, Inc.based in USA
The CT007-F is a compact alpha, beta, gamma detector. This makes it suitable for identifying radioactive contamination. Unlike pancake Geiger-Mueller tube based instruments, it is light, compact, and ...
-
Manufactured by Pentek Inc.based in USA
The Corner-Cutter is designed to remove lead-based paints, radioactivity and other hazardous contaminants from both steel and concrete surfaces in an environmentally safe manner. Pentek developed the Corner-Cutter to scarify walls, joints, ceilings, stairs, girders, pipes, and other areas which are inaccessible to our MOOSE and SQUIRREL-III surface preparation ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you