Radon Monitoring Services For Health And Safety In Europe
-
based in UNITED KINGDOM
Radon is a colorless, odorless, tasteless, naturally occurring, radioactive gas that is formed from the decay of radium. It is one of the heaviest substances that remains a gas under normal conditions and is considered to be a health hazard. Breathing high concentrations of radon can cause lung cancer. Thus, radon is considered a significant contaminant that affects indoor air quality worldwide. ...
-
based in GERMANY
Recording and monitoring of parameters as a precondition for optimized remediation measures. The collection of robust data is an essential foundation for the description of the state of soil and groundwater. Only on such a basis can verifiable evaluations, for example on the need for remediation, be made and effective remedial measures derived ...
-
based in GERMANY
Environmental chemistry, bio-technology, soil mechanics. Sampling and sample processing. Enviro-chemical analysis (soil-water-air). Waste water cadastre, waste water analyses. Bio-technical maboratory (degradation experiments). Toxicological investigations (biotests). On-site measurements (quick tests). Air measurements in buildings. Radon measurements and studies. Construction / soil mechanical ...
-
by Labtox SAbased in SWITZERLAND
The dosimeter sent to your mailbox (within 2 working days) including instructions for use.The analysis performed after you sent back the dosimeter to the laboratory.The report sent via email and if you wish to your mailbox as a paper copy (no additional ...
-
based in GERMANY
Cleaning and disinfection:The DVGW-comprehensive body of legislation: Impurities are caused by air ventilation and deaeration (insects, pollen) or by water ingredients (iron-, lime-, or manganese deposits) in the machines. According to the DVGW-comprehensive body of legislation W 318 and W 281, drinking water tanks have to be inspected once a year and have to be cleaned if necessary. In this ...
-
based in UNITED KINGDOM
If the location, construction and ventilation of a workplace make elevated radon levels seem likely, or it is in an affected area as defined by the National Radiological Protection Board (NRPB), the employer should have the premises tested. We are able to offer this service if required in order to assist you towards compliance with the Health and Safety at Work etc Act 1974 and the specific ...
-
by PM_TEN srlbased in ITALY
Monitoring of particulate matter; Planning, organization and administration of campaigns to collect samples of atmospheric particulate matter in urban, rural and remote sites with equipment especially designed to separate the fractions subject to European and national regulatory limits (PM10, PM2.5). Using 'state of the art' collection systems such as inertial cascade impactor samplers or ...
-
based in CZECH REPUBLIC
ANTIRADON is a program for concentration calculation of radon penetrating from the subsoil into the building interior. Using the program, it is possible to set the right anti-radon ...
-
based in POLAND
Apart from standard geophysical services, GT offers a variety of near-surface geophysical in the field of geology, hydrogeology and environmental protection. These include electromagnetic methods, direct current surveys, magnetic and ground penetrating radar surveys as well as radon detection surveys. GT also designs and completes deep anode groundbeds for cathodic ...
-
Manufactured by Durridge Company, Inc.based in USA
The RAD7 is able to measure both radon (222-Rn) and thoron (220-Rn) concentrations simultaneously and independently. The standard radon calibration is performed with a precision of better than 1% and we guarantee the RAD7 absolute accuracy for radon to be better than 5%. However thoron has a very short half life (about one minute) so that the concentration in the air will change during sample ...
-
by Ökosil Ltd.based in ESTONIA
Ökosil Ltd is an environmental company, founded by the Republic of Estonia and Silmet Grupp Ltd with the purpose to manage large environmental projects just as Sillamäe Radioactive Tailings Pond Remediation and to provide other environmental management and monitoring related services. ...
-
Manufactured by Durridge Company, Inc.based in USA
The EPA recommends, and we agree, that continuous radon monitors be calibrated at least every year. RAD7 calibration requires four to five working days from the receipt of the instrument. As a preliminary to recalibration, we inspect and test every RAD7. If additional service is required, this may delay the return of the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you