Refrigerant Gas Monitoring Equipment For Health And Safety Available In Marshall Islands
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 875 KF Gas Analyzer from Metrohm is a fully automated solution to determine trace levels of water in liquefied and permanent gases. Applying coulometric Karl Fischer titration, this instrument allows quick (< 5 minutes) and accurate analyses. The KF Gas Analyzer is suitable for a variety of gas types. ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The MGS-550 can easily be connected to any central BMS control system (via Modbus connection) or, with its three onboard user-assignable relays, can easily function as a stand-alone unit without the need to wire alarm devices back to a central system. Providing the ultimate in flexibility, the instrument can be upgraded at any time from a one-sensor unit to a two-sensor system by simply ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 175T1 temperature data logger features a large display and alarm indication that makes it ideal for continuous monitoring of storage temperature. The temperature measurement logger is ideal for dependable temperature monitoring in refrigerated and deep freeze rooms for extended periods of time. Creation of Excel Spreadsheets, PDFs, and data analysis are all easily achieved with the ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Volatile Organic Compounds Detector, REF-IR-ST Sensor/Transmitter, is designed to detect the presence of refrigerant leaks in enclosed areas. The REF-IR-ST series employs a high-precision NDIR sensor ideal for gas-specific and accurate measurements of the most commercially used refrigerants. With its 1PPM resolution, 0-1000PPM measuring range, and operating temperature and humidity ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The central management, supply and control unit displays the measured values and messages of the connected Sensors which measure the concentration of different gases in ambient air. The Monitor allows to display and record the measured values as well as to register messages. The potential-free relays serve for controlling further warning systems. Up to 32 Sensors can be controlled and monitored. ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
B152R41 / B152R41S15: Mass flow measuring system with an additional resettable, adding and subtracting counter. B152R51: Mass flow measuring system ( battery-operated with charge indicator). Battery operation enables an application independent of the power supply. With this device, gas monitoring is just that simple. Gas quantities which are filled in and recovered are registered and can be ...
-
PremiumManufactured by Testo, Inc.based in USA
For refrigeration engineers: Compact kit containing testo 549i high-pressure gauge and testo 115i clamp thermometer (two of each). Used in conjunction with your smartphone/tablet, the kit is ideal for servicing, troubleshooting and installing air conditioning and refrigeration systems. The testo Smart Probes App makes your work easier and more efficient: over 90 stored refrigerants, automatic ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
Prevent high maintenance costs by monitoring and maintaining the right dew point in your system. Too much water in your system can lead to e.g. forming of rust, freezing of valves, and even product loss when the moist content is too high for your coating or paint process. Stay in control of your dew point with the VP Dew Point ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The H25-IR PRO is a next generation industrial-grade refrigerant leak detector and gas analyzer capable of detecting over 40 of the most commonly used refrigerants and halogen gas compounds. Special models measure and detect R600a, R290, R744 (CO2) or SF6. It can be used to locate and then quantify gas leaks, as well as log and totalize a group of leaks in a system. The H25-IR PRO adds new ground ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3731 SF6 leak detection system uses photoacoustic spectroscopy (PAS) technology. It offers highly accurate and stable quantitative gas ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The cordless battery operated device measures in seven levels of sensitivity within a short response time. Even after the detection of large leaks the device returns to zero position quickly. The SF6 LeakPointer is easy to operate with one hand. Leakages can be easily detected via the clearly visible LED display or the audible signal (can be switched off). Continuous operation of the device is ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The electronic bottle scales allow quick and easy determination of the filling quantity of a gas bottle. The large weighing platform and the supporting chain provide additional stability of the gas bottle. The weight is indicated on the illuminated display which switches off automatically if the scales are not used for a certain time. Thanks to the tare function gas inputs and outputs can be ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The PGM-IR is an advanced portable monitor that uses long-life non-dispersive infrared (NDIR) sensor technology for analyzing and checking low-level gas leaks. With very fast response and clearing times, the unit can identify and pinpoint very small levels of refrigerants, nitrous oxide or carbon dioxide gas in ambient air, showing real-time concentrations in either parts per million (ppm) or ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
DensiControl IN with connecting kit and 6 m long measuring hose. The F-gas regulation (EU) 517/2014 stipulates regular verification of density monitors installed in switchgear. In combination with a DILO lock valve it is possible to quickly check whether the density monitor switching points are triggered in time without disassembling the density monitor. Thus, the DensiControl IN allows very ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3750-2 basic ventilation system (dual gas) and Innova 3750-5 basic ventilation system (multi-gas) offer fully integrated gas monitoring solutions. They enable accurate tracer gas methods and are ideal for ventilation performance studies or ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
During the operation of gas insulated switchgear decomposition products might occur after a breakdown which has a negative impact on the gas quality in the circuit breaker as well as on the insulation properties. For this reason the measurement of decomposition products is very important. The measurement can be carried out easily by means of test tubes and plastic ...
-
PremiumManufactured by Testo, Inc.based in USA
Pressure and leakage measuring instrument DVGW-approved for all tests at gas and water pipes as load and tightness test and serviceability ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
For measurement of the SO2 concentration in gas mixtures. Before maintenance works are carried out it is absolutely necessary to know the gas quality. This special equipment allows precise measurement of SO2 in gas mixtures. Furthermore, this device is very resistant against contamination and SF6 decomposition products and is therefore a reliable instrument for each revision of circuit ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 316-3 is our best refrigerant leak detector yet, and delivers dependable, rugged performance at a great value. The heated diode sensor provides sensitivity down to 0.15 ounces/year including the new refrigerant blends like R-410A, R-407C, and R134-a, allowing you to quickly locate refrigerant leaks. Just turn it on and start getting readings immediately. Thanks to automatic zeroing, the ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The F-gas regulation (EU) 517/2014 stipulates regular verification of density monitors installed in switchgear. The DensiControl DA allows quick checking to see whether the density monitor switching points are triggered in time. This device allows precise, quick and easy verification of the switching points. The density monitor type to be checked is selected in the data base and is then installed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you