Safety Harnesses Equipment For Health And Safety Available In Palau
-
PremiumManufactured by General Oceanics Inc.based in USA
THREE POINT Yoke, Tripple Harness for 2030 Series ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
Loadtronic 3 is a dynamic weighing system for excavators. The load in the bucket is weighed during normal lifting cycle. The weighing can be started automatically or manually. The display will show the weight currently in the bucket, and the running total. Also, the number of buckets delivered is shown. The weighing system can be used as a tool toavoid over- and underloading of trucks. All ...
-
Manufactured by Cavallero Plastics (CPI)based in USA
The Wohler Camera Skid (URS) was created specifically for the Wohler Camera and designed to increase the effectiveness and lifespan of the video inspection system. The device’s ability to contract and expand for use in 6”-18” pipelines will allow you to use your portable video inspection system in applications that previously required expensive tractor systems. The Wohler Camera ...
-
Manufactured by Protekt Grzegorz Laszkiewicz Spolka z o. o.based in POLAND
Size: S. Color: yellow-blue. Tapes - Material: polyester. Width: 45 mm. Threads - Material: polyester. Connecting and adjusting buckles - Material: High-carbon steel, galvanised, ...
-
Manufactured by Carlisle Interconnect Technologiesbased in USA
CarlisleIT offers 35 years of custom cable assembly experience. We offer engineering support for build-to-print or design capabilities for a complete solution. Our Octax High-Speed Cable Assemblies are available in both plug and socket versions and capable of being utilized in a panel mount application. The connector weighs approximately 40% less than those of its competitors and uses standard ...
-
Manufactured by James Cumming & Sons Pty Ltdbased in AUSTRALIA
Fill the vessel with pre-treated water to about 2/3 the final level of GAC. Gradually add GAC into the water, from around the perimeter, until reaching a level approximately 2% above the desired finish level, ensuring that the water level remains above the level of GAC at all times. The GAC should spread and self-level when the bags are discharged into the water. Agitate the carbon/water mix ...
-
Distributed by Yamaichi Electronics Deutschland GmbHbased in GERMANY
Y-Sol4 Connector and T-Junction Connector. 4mm dia. contacts with locking. Overmolded cable ...
-
Manufactured by RODAN Technologies A/Sbased in DENMARK
Regardless of the connectors you specify to your application, we can customize and manufacture a cable that ideally meets your requirements. Our many years of experience in manufacturing cable assemblies enable us to deliver a product that fully complies with customer specifications and quality requirements – regardless of volume size. ...
-
Manufactured by Honda Power Equipmentbased in USA
Honda 25cc mini 4-stroke engine. Runs on straight, unleaded gas (no mixing). 17" Semi-matic (bump feed) head with Ultra Quiet® line. Durable flex shaft with lifetime warranty. Lightweight - ...
-
Manufactured by Cavallero Plastics (CPI)based in USA
The Universal Roller Skid (URS) was created to increase the effectiveness and lifespan of your portable video inspection system. The device’s ability to contract and expand for use in 6”-18” pipelines will allow you to use your portable video inspection system in applications that previously required expensive tractor systems. The URS1 allows for inspection cameras to negotiate ...
-
Manufactured by Cavallero Plastics (CPI)based in USA
The Universal Roller Skid (URS) was created to increase the effectiveness and lifespan of your portable video inspection system. The device’s ability to contract and expand for use in 6”-18” pipelines will allow you to use your portable video inspection system in applications that previously required expensive tractor systems. The URS1 allows for inspection cameras to negotiate ...
-
Manufactured by XunAng technologies Co. Ltd.based in CHINA
Freightliner Positive Battery Cable Overmolded Harness - RED for 2 Batteries. Fits 2 Battery Setups. Made With 2/0 PVC Starter Cable. Fits up t3/8" Stud. Protective Caps. 100% Copper ...
-
Manufactured by XunAng technologies Co. Ltd.based in CHINA
Freightliner Positive Battery Cable Overmolded Harness - BLACK for 3 Batteries; Fits 3 Battery Setups. Made With 2/0 PVC Starter Cable. Fits up t3/8" Stud. Protective Caps. 100% Copper ...
-
Manufactured by Sunkye International Co., LTD.based in CHINA
An electrical crimp is a type of solder less electrical connection. Micro crimp connectors are typically used to terminate stranded wire. Crimping is normally performed by first inserting the terminal into the crimp tool. The terminal must be placed into the appropriately sized crimp barrel. Crimp-on connectors are attached by inserting the stripped end of a stranded wire into a portion of the ...
-
Manufactured by Gebauer & Griller Kabelwerke GmbHbased in AUSTRIA
We produce copper and aluminum battery harnesses for various temperature ranges. The harness design can be either flexible or solid depending on the application. Ground cables made of copper are available both as insulated cables or braids, where the latter are particularly suitable for higher requirements regarding flexibility and vibration ...
-
Manufactured by Teufelbergerbased in AUSTRIA
The treeMOTION is our top climbing harness for all arborists. It combines comfort, safety, functionality as well as design and impresses with its ...
-
Manufactured by Tef - Cap Industries Inc.based in USA
Convoluted PTFE Tubing ( SAE-AS81914/1, AMS-T-81914/1 or M81914/1 ) is engineered to be an equivalent to that of Corrugated FEP Tubing where sharp turns and small band diameters are needed. It can be used as an electrical or fluid conduit in the semiconductor industry. PTFE Convoluted Tubing will operate in applications where high temperatures are required and other materials are not suitable. ...
-
Manufactured by CMC Rescue, Inc.based in USA
A lightweight, low-profile harness that’s as durable as it is comfortable. The ATOM Global is certified to European and North American Standards. It offers efficiency and versatility with aluminum attachment points, soft web side attachments, steel adjuster buckles, molded gear loops, and four tool loops. A chest ascender can be added using CMC’s ATOM Chest Ascender ...
-
Manufactured by CMC Rescue, Inc.based in USA
A rope access workhorse that’s as durable as it is comfortable. The ATOM Access is certified to European and North American Standards. It is built with a custom feature set for rope access including aluminum attachment points, aluminum side attachments, steel adjuster buckles, molded gear loops, tool loops, and an integrated chest ascender that can be easily swapped out when ...
-
Manufactured by Pico-Box Technology Limitedbased in CHINA
With the same mounting holes as that of the traditional ATX PSU, and supporting two separate input rails to deliever maximum 500 Watts power, the X7-ATX-500 is the ideal choice to build a VR Ready mini-ITX ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you