Only show results in Texas? Ok

Safety Masks equipment for Health and Safety

  • Premium

    STS - Imaging System

    STS worked with NPL (National Physical Laboratory) to develop and commericialise a system that they had developed to prototype stage for the identification of contamination on surfaces and in particular on people. This system originally called 'Fives' was designed to quantify amounts of airborne contaminants that would be deposited on a person ...

    By Safe Training Systems Ltd. (STS) based in Wokingham, UNITED KINGDOM. from Development Product line

  • Mask Fit Testing System for Military Organizations Model M41

    The M41 PATS tests how well a military gas mask fits the soldier. Modern military masks are capable of a high degree of protection, but ONLY if they are fitted correctly and donned properly. A mask that is capable of protection factors of greater than 10,000 may only give a protection factor of 50 if it is incorrectly donned or is not the optimum ...

    By TSI Incorporated based in Shoreview, MINNESOTA (USA). from Respirator Fit Testing Product line

  • Model Purakol-HG - Activated Carbon Media

    PURAFIL PURAKOL-HG MEDIA, 3EE shall consist of sulfurized, bituminous, coal based, pelletized, activated carbon of high adsorptive capacity. Purakol-HGs Media is specifically designed for the capture of mercury vapors.

    By Dimtech S.A based in ASPROPYRGOS, GREECE. from Chemical Filters Product line

  • Model Moldex 9000 - Reusable Full Facepiece Respirators

    Exclusive over-molded lens design eliminates usual heavy-clamping frame. Lightweight respirator features stand away head harness with extra wide opening for easy on/off. Strap buckles are securely molded directly to facepiece for rugged use and ease of adjustment. Coated lens for scratch resistance. NIOSH Approved.

    By Equipment Direct based in Brea, CALIFORNIA (USA). from Dust Mask, Respirators Product line

  • FUTURA - Model BLACK-L - Half Masks

    Made of rubber: a confortable and high elasticity material that provides excellent protection, comfort and fit. It is resistant to heat, humidity and ozone pollution. It’s waterproof and non-toxic.

    By MEDOP based in Bilbao, SPAIN. from Breathing Protection Product line

  • NATURE - Model FFAB1P3 R D - Half Masks

    Ultra-compact pre-assembled half mask ready to use. Manufactured in extra-soft hypo-allergenic thermoplastic (TPR) material. Membrane for low resistance to breathing, offering comfort to the user. Permits perfect compatibility with other PPE's.

    By MEDOP based in Bilbao, SPAIN. from Breathing Protection Product line

  • Evermatic - Welding Masks

    Evermatic welding mask has been designed especially for demanding professional use in demanding circumstances. The mask protects face, neck and ear areas excellently from UV radiation and welding sparks.  The light, but durable and elastic structure removes neck’s unnecessary stress injuries. The mask’s glass shutter has been ...

    By Evermatic Oy based in Hapuoja, FINLAND. from Welding Helmets Product line

  • FAST-mask - Escape Set

    The FAST-mask escape set from Cam Lock provides instant protection in less than 5 seconds! With a truly unique and patented expanding head harness the FAST-mask is an escape respirator with a difference. Cam Lock has developed the FAST-mask escape set so that the harness automatically activates as soon as a face seal is achieved and not ...

    By Cam Lock Ltd based in Aldershot, UNITED KINGDOM.

  • Primagard - Surgical & Procedure Masks

    When priMED began supplying medical face masks in Canada nearly a decade ago—one thing was clear—clinicians were not getting the protection they needed. As we’ve grown to become the largest supplier of medical face masks to Canadian hospitals and long term care facilities, we’ve focused heavily on educating hospital staff ...

    By priMED Medical Products, Inc. based in Edmonton, ALBERTA (CANADA).

  • NATURE - Model FFABEK1P3 R D - Half Masks

    Ultra-compact pre-assembled half mask ready to use. Manufactured in extra-soft hypo-allergenic thermoplastic (TPR) material. Membrane for low resistance to breathing, offering comfort to the user. Permits perfect compatibility with other PPE's.

    By MEDOP based in Bilbao, SPAIN. from Breathing Protection Product line

  • Phillips Safety - Model 300 - Torching Safety Glasses

    The Model 300 Torching glasses are lightweight and extremely durable. They come with glass lens and protective side shields. Designed for people who hate goggles and large masks. Supplied with Case & Retainer Cord!

    By Phillips Safety Products based in Middlesex, NEW JERSEY (USA). from Welding Safety Products - Torch & Brazing Product line

  • Model OIT-98 - Yellow Transparent Dense Form Liquid Or Tie Crystal

    Demonstrate an excellent bactericidal effect; with broad-spectrum, long-lasting features. Low toxicity; easy to operate; can be added at any production step. Applicable in the medium of the pH value in a range of 5 to 9. Good uniformity of dispersion; contain no VOC; with thermal stability. Not combustible and easy to transport and use. Stable in ...

    By Dalian Bio-Chem Co.,Ltd. based in Dalian, CHINA. from OIT Series Product line

  • Scentroid - Model SM100i - Intelligent Personal Olfactometer

    The Scentroid SM100i , Intelligent Personal Olfactometer represents the next evolution in personal olfactometry. This automated olfactometer can conduct full odour analysis including YES/NO and Hedonic Tone test modes in full accordance to the international EN13725 standard. The SM100i can analyze from a sample bag or ...

    By Scentroid, a Division of IDES Canada. based in Stouffville, ONTARIO (CANADA). from Olfactometers Product line

  • Odyssey - Model N95 - Disposable Full-Face Respirators

    Approved for 95% efficient protection against non-oil particulates. Also for welding on aluminum or steel where a half-mask of full-face respirator is not required. Soft pre-shaped nose cushion and adjustable headstrap with soft polypropylene inner layer provide the industry accepted N95 disposable respirator. This mask is also available with a ...

    By Degil Safety Products Inc. based in Vaughan, ONTARIO (CANADA). from Respiratory Product line

  • Sibol - Model 14240050 - Assisted Fresh Air System

    The assisted Fresh Air system supplies the user with fresh air flow in confined areas for a longer periods of time than when using unassisted Fresh Air systems. It allows operators to work safely in potentially oxygen deficient hazardous areas, breathing air from an uncontaminated source.

    By Nueva Sibol S.L.U. based in Zamudio, SPAIN. from Respiratory Protection Product line

  • Scentroid - Model SM100 - Infield Olfactometer

    Ultra-Portable Personal Olfactometer. Scentroid SM100 is the world’s most advanced personal olfactometer. This odour measurement apparatus allows users to accurately quantify odour concentration of ambient air and source samples. This revolutionary odour measurement device (Patent Pending) offers an easy-to-use and cost effective alternative ...

    By Scentroid, a Division of IDES Canada. based in Stouffville, ONTARIO (CANADA). from Olfactometers Product line

  • Spring Protezione - Full Face Masks with Filtered Air Blowers

    FULL FACE MASKS with littered air blowers to ensure low breathing resistance and constant safety pressure and to prevent lens fogging.

    By Spring Protezione S.r.l. based in Vignola, ITALY. from Ventilated Safety System Product line

  • Model BLS 4000 Series - Half Mask

    The 4000 series half mask can be disassembled in less than a minute. This allows for quick and easy cleaning. The ergonomic and modern design offers greater user comfort and a more secure fit. The support harness is attached to the rigid body of the half mask, not to the facepiece, therefore it does not mark the user's face. The bayonet fitting ...

    By Ronco based in Concord, ONTARIO (CANADA). from Respiratory Protection Product line

  • Model E 952 P2 R - Reusable Anti-Dust Filter

    FOR THE FRIST TIME IN POLAND, THE REUSABLE ANTI-DUS FILTERS are certified as products which meet the requirements of the NEWEST PN EN 143:2000/A1:2006 STANDARD which requires that the filters be examined with a paraffin oil mist. If the products lasts through a varied penetration in time test means that it is high quality. Additional examinations ...

    By Filter Service Sp. z o.o. based in Zgierz, POLAND. from Gas Mask Filters Product line

  • Model EW 952 P2 R - Reusable Anti Dust Filter

    FOR THE FRIST TIME IN POLAND, THE REUSABLE ANTI-DUS FILTERS are certified as products which meet the requirements of the NEWEST PN EN 143:2000/A1:2006 STANDARD which requires that the filters be examined with a paraffin oil mist. If the products lasts through a varied penetration in time test means that it is high quality. Additional examinations ...

    By Filter Service Sp. z o.o. based in Zgierz, POLAND. from Gas Mask Filters Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you