Safety Monitoring Equipment For Health And Safety
-
ShowcaseManufactured by Fluid Components International LLC. (FCI)based in USA
The FLT93B BASIC insertion type FlexSwitch for flow and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. FCI is the only thermal manufacturer providing temperature compensation to ensure set point accuracy for process temperatures that vary up to ±100°F. The FLT93B is easily field-configured, providing unparalleled ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG PRO M can generate up to 20 L/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 psi). The HG PRO M includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using ultra pure water. No acid or alkaline solutions are used. The two-column PSA drying system with automatic regeneration ensures the maximum grade of ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Monitoring single toxic hydrocarbons for the industrial applications. Synspec Delta 100 and Delta 300 analysers are gas chromatographs (GCs) built specifically for the industrial applications to ensure worker safety, emissions and process control. Depending on what component and its concentration you need to measure, our team will develop and install an appropriate detector, columns, sample ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The HydroGen series HG PRO is able to generate up to 1500 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 psi). The HG PRO includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
AAS for graphite furnace and hydride techniques. Sensitive trace analysis for recurring measurement tasks with higher sample throughput, upgradeable to direct solid sampling. Easy to use - simple multielement analysis with no need for lamp changes. Powerful - wide dynamic range and continuous calibration. Cost-efficient - high productivity and operating costs that remain ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The eSense Low-Temperature CO2 Transmitter is designed to measure ambient CO2 levels outdoors in any weather. The heating element maintains a constant temperature for both the sensor and air samples, giving consistent measurements over ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eFilter is a unique instrument that combines a standard gravimetric filter holder and sensitive real-time PM detection in one compact instrument. The Dekati eFilter assembly includes a standard gravimetric filter holder that is used to determine gravimetric mass of particles in the ...
-
PremiumManufactured by Lutz Pumpen GmbHbased in GERMANY
Liquid examples: For flammable mineral oil products, easily flammable hydrocarbons and other chemicals in explosion hazardous ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FLT93F insertion type FlexSwitch for flow and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. This product was designed for heavy industrial environments including high temperature and high pressure. FCI is the only thermal manufacturer providing temperature compensation to ensure set point accuracy for process temperatures ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
To provide accurate performance and results, the PS500 has to be properly used and maintained. The Auto Bump & Calibration Station (ABC) provides bump testing, calibration and data management options and is compact, robust and intuitive to use. Two versions of the ABC are available allowing either a single gas cylinder or up to three cylinders to be connected. Additionally, a special three ...
-
PremiumManufactured by Lutz Pumpen GmbHbased in GERMANY
Liquid examples: Neutral liquids, mineral oil products, many acids and alkalis, cosmetic products, foodstuffs, paints and lacquers, ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Gravimetric Impactor (DGI) is a high sample flow rate cascade impactor for low concentration particle measurement applications. The DGI measures gravimetric particle mass size distribution of particles < 2.5 μm in five size fractions. Typical measurement applications of the DGI impactor include engine emission measurements, air quality studies and other low concentration ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FLT93L inline type FlexSwitch for flow and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. FCI is the only thermal manufacturer providing temperature compensation to ensure set point accuracy for process temperatures that vary up to ± 100°F. The FLT93L is easily field-configured or factory preset, providing ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
SITRANS SL is designed for measuring oxygen (O2) with high sensitivity. It consists of a pair of cross-duct sensors, a transmitter unit and a detector unit, both with the same dimensions. Due to its little installation effort and its minimum maintenance requirements, SITRANS SL guarantees a high level of economic ...
-
PremiumManufactured by Fluxana GmbH Co. KGbased in GERMANY
The Vitriox Electric is a fully automatic fusion machine with cold to cold operation for 1, 2, 4 or 6 samples (1 sample at a time). lt has been designed to achieve the best possible results in day-to-day XRF laboratory ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The central management, supply and control unit displays the measured values and messages of the connected Sensors which measure the concentration of different gases in ambient air. The Monitor allows to display and record the measured values as well as to register messages. The potential-free relays serve for controlling further warning systems. Up to 32 Sensors can be controlled and monitored. ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
ENERPAT Metal Chips Briquetting Press designed for pressing metal chips / metal turnings like steel, aluminum, copper, stainless steel into compact bales, reducing the metal chips / metal turnings volume, saving energy for furnace. Capacity from 50 kgs/h to 2000 kgs/h. Adopting UK technology, 100% high quality with CE, ISO ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Quadset Refrigerant Gas Monitor is designed to detect refrigerant leaks in enclosed areas. The Monitor utilizes a sophisticated NDIR sensor specific to any one of the commercially available refrigerants. It can monitor over a range of 0-1000ppm with a resolution threshold as low as 1ppm. The QuadSet can monitor up to four locations in one of two modes of operation, diffusion or ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
By using spectral analysis, biological reader to quickly detect whether there are living bacteria according to the fluorescence changes of fast biological indicators containing specific enzyme spores. It is suitable for testing the treatment results of sterilization equipment. It is suitable for fast and effective monitoring of the high or low temperature sterilization effects of medical ...
-
PremiumManufactured by Dewaco Ltd.based in FINLAND
For sludge and scum collection and removal we offer chain & flight-type chain scraper systems. These are the most sophisticated systems for sludge and scum removal from rectangular settling tanks. Chain Scraper Systems can be used in multiple application basin ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you