Health And Safety Services Available In Mali
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita provides maintenance services through a customer-focused support system consisting of 30 service centers nationwide. This system provides customers with peace of mind after the water treatment systems have been delivered. We offer thorough follow-up maintenance services for water treatment systems and facilities to ensure smooth, stable operation through our proactive approach to ...
-
Premiumbased in USA
EPA, DOT and OSHA require a vast number of written plans and procedures. Environmental Resource Center can determine which are applicable to your operations and then develop the required plans and procedures for you. From hazardous materials and hazardous waste management to notification procedures, security plans, and emergency procedures, Environmental Resource Center can determine which plans ...
-
PremiumManufactured by Avecom NVbased in BELGIUM
Biobased and biodegradable polymers are providing the key to tackling single-use plastic pollution by reducing plastic waste and offering a sustainable alternative to traditional plastics. Plastic pollution and the disposal of single-use plastic packaging are critical sustainability issues. Currently, we generate roughly 300 million tonnes of plastic waste every year, which is equivalent to the ...
-
PremiumManufactured by EnviTec Biogas AGbased in GERMANY
A safe pair of hands for safety. One service provided by EnviTec Biogas Betriebs & GmbH Co. KG is the provision of in-depth advice and expertise by the team for Safety, Health and the Environment (or ‘SHE’ for short). These consulting services include safety inspections for plants requiring a licence according to section 29a of the Federal Immission Control Act (BImSchG): our ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
Our in-house Research and Development capabilities facilitate product development to ensure state-of-the-art technology in constantly changing environments. Legislative changes have affected the way we dispose of municipal solid waste, tires, medical waste, electronic hardware, and confidential documents. Consequently, these industries rely on Shred-Tech to successfully design and manufacture ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Reducing environmental impact using our technologies cultivated through studying water to fully utilize limited resources. Kurita’s solutions are not limited to water but expand to include the whole environmental field. Using featured technologies to reduce the impact on the global environment, such as those to reduce the waste generated by water treatment and recycle it as new resources as ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Contributing to the improvement of production efficiency and product quality through water in the manufacturing process of customers. Manufacturing processes are ever evolving in each industry. Water is involved in the manufacturing processes of various products, notably including leading-edge electronic devices, and water treatment technology plays an important role in improving production ...
-
PremiumManufactured by Plasma Clean Air Ltd.based in UNITED KINGDOM
Reduce your energy costs and improve indoor air quality with duct seal. In most ventilation systems over 10 years old, it’s possible that your energy costs and air is escaping from loose joints or cracks in the ductwork. Our engineers can coat the internal areas of your ductwork and seal all gaps and cracks, in which air and energy can escape. With your ductwork sealed, you can be sure that ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Do you need regular inspection and maintenance, or maintenance of your AERZEN packaged unit? Or do you have a technical problem which cannot be solved by our phone support or by your own maintenance team? Then, AERZEN assembly service will help you. Our teams, which are in place all over the world, know what is important, and will quickly arrive on site and to provide you with expert ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
All water treatment systems require a number of technologies to meet their effluent treatment goals. Remediation of a light non aqueous phase liquid (LNAPL) plume, for example, may require an oil-water separator, air stripper, and carbon adsorption system to meet discharge requirements. However, it is often wise to add other components to protect the primary treatment equipment, but not ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
AERZEN machines run quietly. But because operational environments differ, we have acoustic specialists on hand to help with the solutions you need, quickly and sustainably. ...
-
Premiumbased in NETHERLANDS
Best Available Technique to to mitigate and prevent biofouling risk in industrial water systems. H2O Biofouling Solutions provides the most comprehensive solution to the corrosive and costly effects of ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
If you need to return an instrument to us for warranty, repair, calibration/certification or routine maintenance, we’ll send it back to you fully tested and complete with a certificate of conformity. Please ensure that you have completed product maintenance on your product prior to completing the RMA form. Please read our Equipment Return Policy before completing any RMA Authorization ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
From system design to installation, commissioning and validation, Particle Measuring Systems (PMS) can guide you through a cleanroom environmental monitoring systems project from conception to completion. You can rely on our experience managing fully integrated systems worldwide serving both life sciences and microelectronics customers—in a variety of ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
For our Hg-CEM product line, we offer a wide range of support services tailored to fit your needs. Our engineering experts are available to install the Hg-CEM at your location, and we can provide support to integrate our Hg-CEM into any existing data acquisition system. Tekran Hg-CEM training courses even have options for online ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
Apart from designing and manufacturing equipment, Gouda-Geo is also your partner for repair and general or routine maintenance (i.e. servicing) and even restoring machinery and equipment back to working order (rebuilding or remanufacturing). This to ensure they work efficiently and safely and to prevent breakdown and unnecessary ...
-
PremiumManufactured by MSE Filterpressen GmbHbased in GERMANY
Tried and Tested Revised - Both in and Out. MSE filter presses are still among the highest quality capital goods in the field of mechanical solid/liquid separation – not least because of their reliability and productivity. In order to ensure consistently high productivity and maximum operating life, old plants require increased attention. MSE offers a comprehensive maintenance package for ...
-
Premiumbased in UNITED KINGDOM
The UK government has published the principles for setting up new Clean Air Zones (CAZ) in England. A CAZ can limit entry by more polluting vehicles, for instance by road charging or traffic management. Local authorities who propose a CAZ need to consider how its introduction will impact on vehicle emissions and pollutant concentrations, in order to have confidence that their objectives will be ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
STS have over the years developed and had manufactured many molded and machined cases for equipment and instrumentation. This is just one example of a casing designed for a personal dosimeter simulator. The design of this unit threw up some interesting challenges. The unit had to be manufactured from RF transmissible material with particular attention given to the case area surrounding the 3 ...
-
PremiumManufactured by Intecna srlbased in ITALY
For over 30 years, INTECNA has developed and applied products that are used in thepipeline hydraulic testphase. Our products have been approved by many Oil & Gas Companies, have been accepted in the discharge phase by Environmental Control Authorities around the World and have therefore received many references that identified INTECNA as an international ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you