Solvent Safety Equipment For Health And Safety Available In Costa Rica
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Quick and compliant. The FatExtractor E-500 is designed for quick and compliant fat extraction. Readily adapt your FatExtractor E-500 to changing needs with the interchangeable glass assembly and execute extractions according to Soxhlet, Randall or ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Permanent Total Enclosures (PTEs) provide numerous advantages for manufacturers who paint, spray, coat or apply solvent based materials to their product. The primary function is to provide 100% capture of all fugitive over-spray of harmful air pollutants used within the enclosure, maximizing the capture and control efficiency of the facility. This results in fewer uncontrolled emissions being ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
For classical flow measurement using Q/h: Corrosion-proof Venturi half shells according to DIN 19559/II for installation in various part filled channels with vertical walls. The durable corrosion-proof Venturi half shells are easily installed on vertical channel walls by using the accompanying fastening materials. This eliminates the common problems with compact Venturis regarding dimensional ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The SFC-660 system, developed by Sepiatec, represents a powerful solution for preparative separations by means of supercritical fluid chromatography (SFC). The unit has been designed for flow rates of up to 660 ml/min at a modifier portion of 40 %. All the advantages of SFC technology are combined: Quick separation, a reduced consumption of organic solvents and thus cost, increased safety and an ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The TecPen Oxygen (O2) and Carbon Dioxide (CO2) Weld Purge Analyzer is designed to provide accurate measurements down to 0% oxygen and up to 100% carbon dioxide when back purging with argon and CO2 gas mix during welding. ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep A Supp 3 - 250/4.6 solves separation problems in aqueous and organic media. It can be used reliably with a wide range of eluents – even those with high proportions of organic solvents. With the Metrosep A Supp 3 - 250/4.6, samples which present a great analytical challenge can be analyzed in routine operation, for example the measurement of biological samples or the ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Vinyl Ester Mortar 400 is used in the construction of floors, sumps, trenches, tanks, vessels and bleach towers in chemical processing; food & beverage plants; dairies; laboratories; textile, steel and pulp & paper mills. 400 has excellent resistance to oxidizing bleach solutions, mineral and organic acids, alkaline solutions and some organic solvents. When used with ...
-
PremiumManufactured by Infitek Co., Ltd.based in CHINA
This series of products has the function of quickly and safely evaporating water and organic solvents in the sample. The processed samples can be conveniently used for various qualitative and quantitative analysis – chemistry, biochemistry, biological analysis, immune screening, food safety, residue analysis, ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The safe way to handle organic solvents with the Mini Spray Dryer S-300. The safe way to spray dry organic solvents is to use the Inert Loop S-395 as the ideal accessory for your Mini Spray Dryer S-300. Its innovative design makes spray drying of organic solvents more environmentally friendly, cost-efficient and ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The TecWeld 0-2000ppm O2 Analyzer is designed to provide distinct accurate measurements of oxygen content in welding and industrial ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Non-Flammable safety solvent aerosol cleaner is formulated with low conducting ingredients allows you to safely clean motors and electircal equipment even while they operate. This product has a high dielectric strength of 32,000 volts, and can remove dust, dirt, oil and tar. Aerosol safety solvent won't corrode delicate parts or leave behind any ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Small particles, small samples, high yields. With the Nano Spray Dryer B-90 HP, gently process the smallest sample amounts into submicron particles with minimal product loss. The user-friendly system improves productivity in areas where small particles make a big ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The next generation laboratory spray dryer. With the Mini Spray Dryer S-300, BUCHI solidifies its position as a global market leader for more than 40 years. The laboratory spray dryer combines outstanding product design with unique instrument capabilities to offer a superior user ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT LT is a seamless, spray applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT® LT is installed under slab and on below grade vertical walls as a vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT® LT spray-application directly to penetrations, footings, grade beams, ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Sepiatec’s new SFC-250 system is a compact benchtop unit designed for preparative separation using supercritical fluid chromatography. Measuring just 72 x 60 x 88 cm (W x D x H) the system offers all advantages of SFC technology such as fast separation, reduced consumption of organic solvents, lower costs, improved environmental compatibility and increased ...
-
PremiumManufactured by ODLABbased in SOUTH KOREA
This bottle top dispenser is made of glass and Teflon product. It is a products that designed for using strong acid and organic solvent. Base on the ruby bowl which inside of the dispenser to division slowly when the inhale of reagent is emitting, the reproducibility of the dispenser level can be higher, additionally, Teflon adapter can be connected to use to match the reagent bottle which was ...
-
PremiumManufactured by membraPure GmbHbased in GERMANY
Designed for the analysis of anions and cations: This IONUS is suitable for the analysis of anions and cations in research, development and everyday routine. The sample solutions are mostly water-based and may contain water-miscible organic solvents. A classic example is the analysis of (drinking) water according to EPA 300 Part A and B. The advantage of IONUS is the compatibility with IC ...
-
PremiumManufactured by CETCObased in USA
For high-risk underslab and below-grade vertical walls, LIQUID BOOT® PLUS combines traditional Liquid Boot® spray-applied membrane with high-performance VI-20™, a 20-mil polyethylene-EVOH copolymer membrane, to form a superior vapor intrusion barrier that’s ideal for VOCs including BTEX and chlorinated solvents. Even greater contaminant resistance is achieved when LIQUID BOOT ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The SFC-50 from Sepiatec is a compact and easy-to-use chromatography system for preparative separations on small columns by means of supercritical fluid chromatography (SFC). The system offers the comprehensive benefits of SFC technology, such as faster separations, lower costs due to reduced consumption of organic solvents, as well as being more environmentally friendly at increased ...
-
PremiumManufactured by ODLABbased in SOUTH KOREA
This Acid Purification System is a product used to purify acids and some organic solvents by the subboiling method. It is a metal-free product using high-purity quartz tubes. The PTFE support and the regulator parts inside the PVC are protected from corrosion even when exposed to acid fumes. The heater system uses two 500W quartz heaters to purify nitric acid, hydrochloric acid, etc., and is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you