Sound Level Monitoring Applications available in Michigan
-
Premium
Blowers and compressors designed for better solutions in cement applications
Safety is the number one priority for the most challenging applications in cement plants operations. That‘s why AERZEN blowers, rotary lobe compressors and screw compressors for the cement industry are built with the highest standards to guarantee a safe and reliable operation in the high demanding cement ...
By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.
-
Premium
FT-NIR analysis for measuring meat products sector
According to the Organization for Economic Co-operation and Development, worldwide consumption of beef, poultry, and pork will exceed a combined 308 million tons in 2018. Additionally, Newsweek reports, "Over the last 50 years, the average amount of meat eaten per person globally has almost doubled, from around 50 pounds in 1961 to 94 pounds in ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Sound level meters & Noise dosimeters for Environmental noise monitoring industry
Environmental Noise is one of the fastest growing areas of noise monitoring, mapping and control. The EU has introduced a number of Directives aimed at increasing the level of information about Environmental Noise across the EU. In 1996, data from the EU Green Paper on Future Noise Policy estimated that around 20% of the EU's population, or close to 80 million people, suffer from noise levels that experts consider to be unacceptable. Most of these people become annoyed and suffer from sleep deprivation, which ...
By Cirrus Research plc based in Hunmanby, UNITED KINGDOM.
-
Sound level meters & Noise dosimeters for Noise nuisance measurement industry
Neighbour Noise, Environmental Noise & Community Noise. Noise nuisance is a growing issue that continues to hit the headlines. Whether it's noisy neighbours, barking dogs or music events, the need to measure noise nuisance is rapidly ...
By Cirrus Research plc based in Hunmanby, UNITED KINGDOM.
-
Noise testing equipment for vehicle noise monitoring
In a world where there is a drive for everything to be quieter, vehicle noise measurement and control is a growing application. If measurements need to be made to ISO 5130:2007, which is an internationally recognised standard for vehicle exhaust noise testing, a more detailed measurement needs to be made. ISO 5130:2007 requires three consecutive measurements to ensure repeatability. These measurements are taken at a specified engine speed, or RPM, and the maximum sound level produced during the test is ...
By Pulsar Instruments Plc based in Hunmanby, UNITED KINGDOM.
-
Noise monitoring for workplaces
Measurement of the noise exposure of an individual over the working day. They should be used for mobile workforces where it is not always practical to measure with a hand held Sound Level ...
By Casella based in Kempston, UNITED KINGDOM.
-
Sound level measurement for safety regulations
Hand held instruments for the measurement of an employee's noise exposure. Frequency analysis within Sound Level Meters can also be used to determine the correct selection of hearing ...
By Casella based in Kempston, UNITED KINGDOM.
-
Sound instrumentation for building acoustics
The field of building acoustics consists of two parts; Room Acoustics which deals with sound propagation in a room and Building Acoustics, which deals with sound propagation between rooms. Typically, room acoustics is related to the quality of sound, e.g. concert hall acoustics, while building acoustics is more related to unwanted sound, i.e. when you want to hear as little as possible of what is going on in adjacent rooms. From a measurement technology point of view, the two have a lot in common which shall be ...
By Norsonic AS based in Tranby, NORWAY.
-
Sound level meters & Noise dosimeters for Noise at work industry
Occupational noise is one of the most overlooked risks in the workplace. Ignoring this hazard can result in fines or prosecution from the Health & Safety Executive. You are also open to action from Personal Injury Lawyers seeking compensation for Industrial Deafness Claims. Why? Exposure to excessive noise levels can cause noise-induced hearing loss or tinnitus. Hearing damage is irreversible, so it is vital to ensure you are protecting your employees and your ...
By Cirrus Research plc based in Hunmanby, UNITED KINGDOM.
-
Sound level meters & Noise dosimeters for Vehicle noise measurements industry
The noise from vehicles such as cars, buses and trucks is wide spread with many people being affected by these noise sources in their daily lives. All modern vehicles will be designed to meet strict safety and emissions standards as well as noise output levels. All vehicles sold in the EU must comply with a range of noise directives to ensure that they meet these specified noise levels when they are sold and many countries enforce regular checks over the life of the vehicle. Motor Sport noise is a often a source ...
By Cirrus Research plc based in Hunmanby, UNITED KINGDOM.
-
Acoustic Theory
Acoustic theory for heterogeneous system should yield a relationship between some measured macroscopic acoustic properties, such as sound speed, attenuation, acoustic impedance, angular dependence of the scattered sound, etc., and some microscopic ...
By Dispersion Technology Inc. based in Bedford Hills, NEW YORK (USA).
-
Sensor Technology for Underwater Acoustics
Scanmatic has since its establishment in 1971 been a trusted partner and provider of high-tech solutions and systems within underwater acoustics, also denoted hydroacoustics. Hydroacoustics is the study and application of sound in water. For Scanmatic this is all about how to create innovative- and high-quality solutions for doing underwater recording, analysis, signal processing and transmission of underwater sound, as well as combinations of these. Most of these systems focuses on different ways to simulate the ...
By Volue AS based in Arendal, NORWAY.
-
Noise monitoring for airports
Airports, small and large, use noise and operations monitoring systems to reduce the noise of flight operations in the surrounding community. Noise monitoring is generally used to evaluate noise abatement programs and to develop aircraft departure and arrival procedures that minimize the impact of aircraft noise based upon altitude, flight path, and time of day. Noise monitoring is linked with radar tracking so that specific aircraft can be identified when noise limits are exceeded and so operational ...
By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).
-
Noise monitoring for the petrochemical industry
Many industrial operations take place over lengthy time periods and operations often continue 24 hours a day. By implementing a 24 hour noise monitoring system, with real-time communication and alert notification, a plant can demonstrate to the community and regulatory agencies that they are sensitive to the community and prepared to root-cause and correct any problems that may ...
By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).
-
Noise monitoring for the construction industry
Whether you are in the city, suburb or at a weekend getaway location, noise is an important factor in determining your quality of life or the success of your business. Many areas have local noise legislation that defines the noise limits that can be produced and experienced during the day or at night. This noise may be generated by vehicle traffic, aircraft, industrial sites, construction projects, entertainment events, or many other ...
By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).
-
Noise monitoring for industrial sites
Industrial noise generated from plants, mills, refineries, shipping docks, utilities, and more, impact the quality of the surrounding community. By controlling and monitoring this noise a community and industry can establish a working relationship that will benefit all. An effective noise monitoring program will allow an industrial site to understand the noise sources and time periods that are causing concerns and then develop a plan for ...
By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).
-
Sound level meters & Noise dosimeters for Workplace noise monitoring industry
Completing a Noise Risk Assessment can seem like a big task at first. That's why our Noise Experts have provided advice based on their years of experience. Find answers to common problems such as "Do I have a noise problem?" and "What do the Regulations require me to do?" We've also recommended a range a products to help get you started with workplace noise ...
By Cirrus Research plc based in Hunmanby, UNITED KINGDOM.
-
Pulsar noise testing equipment for entertainment noise
As of April 2008, the entertainment industry is expected to comply with The Control of Noise at Work Regulations (2005). Owners and venue operators are now legally obliged to ensure their workforce is protected from excessive noise levels. ...
By Pulsar Instruments Plc based in Hunmanby, UNITED KINGDOM.
-
Short term noise measurement for safety consulting
For environmental noise monitoring when short measurements are required using a hand held Sound Level Meter. This could be for boundary monitoring of industrial sites or noise surveys for planning ...
By Casella based in Kempston, UNITED KINGDOM.
-
Sound level meters & Noise dosimeters for Aircraft & airport noise monitoring industry
In most applications, the object of an Airport Noise Monitoring System is to monitor and ultimately, manage and control the noise levels generated by aircraft movements in and around the ...
By Cirrus Research plc based in Hunmanby, UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you