Toxic Gas Equipment For Health And Safety Available In Norway
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Compressed gases are viewed as critical utilities in many industries when in direct product contact or in the clean room environment. Control of the environment where Pharmaceutical and Cosmetic products are manufactured is a key element of ISO and GMP Standards worldwide. The absence of viable contamination is considered a critical quality attribute due to its potential to dramatically impact ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD III Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide. Sampling gases at pressures greater than sea level, such as 25 – 100 psi, is challenging for particle counters. Connecting pressurized air or gas to a particle counter can defeat its flowmetering system and possibly damage the ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot H2S is a robust H2S Gas Monitor that can measure hydrogen sulfide levels in the air. This H2S gas detector uses electrochemical sensing technology to measure H2S concentration in the air. The industrial hydrogen sulfide monitor uses an electrochemical sensor for real-time monitoring. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Emcel Filters Limitedbased in UNITED KINGDOM
Activated Carbon Filter Unit for applications that require heavy duty performance. The Maxicarb Carbon Filter has been developed to remove and control a wide range of chemical vapours, odorous and toxic gases from airstreams where critical, high efficiency filtration and heavy duty performance is necessary. The high quality activated carbon grades used in Maxicarb filter units are capable of ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Ammonia is a gas that easily dissolves into water, there are several common detection methods,but ammonia is toxic and corrosive, the current measurement mainly uses the TDLAS direct measurement method. TDLAS is essentially a spectral absorption analysis technology, which uses the selective absorption characteristics of gas molecules for specific wavelength lasers, and analyzes the changes in the ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR EX660 is a compact and lightweight multi gas detector that continuously measures combustibles, O2, CO, H2S and other toxic gases in ambient air. With up to 6 sensors, it can detect at most 7 gases at the same time. Its functional and watertight design (IP 66) incorporates a rugged impact resistant, rubberized housing to meet the toughest requirements of harsh ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The DG7 Series is a group of intelligent gas detectors employs a wide choice of sensor types. The DGI -TT7-E is used for Toxic gases or Oxygen monitoring. The DG-TT7-S is a solid-state metal oxide semiconductor. The DG-TX7 employs a pair of OXYCOL catalytic sensors. All DGi-TT7 are constructed from a common housing and electronics with the detection properties being determined by the type of ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The MX 16 is a compact digital or analog controller, one input, low-profile controller that continuously monitors gas detection, like: O2, CO2, CH4, H2, LPG. Specially designed for applications in laboratory, storage, small boiler room, and breweries or battery charging rooms, the MX 16 measuring unit prevents the risks of explosion linked to the presence of toxic, anoxic and explosive gases in ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot NO2 is a robust NO2 Gas Monitor that can measure Nitrogen Dioxide parameters in the air. This NO2 gas detector uses Electrochemical Sensing technology to measure total NO2 in the air. The monitor is equipped with the NO2 sensor module. The sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The MX 256 is a digital control unit intended for the detection and measurement of gases present in the atmosphere and more generally for the processing of any digital signal from digital sensors (OLCT 10N types), relay module, analog output module, logic input module. Thanks to its new option, an industrial controller module or remote HMI, it is possible to add analog input modules for ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Detecting, measuring and warning - Everything you need. Portable gas concentration measuring device for detecting, measuring and warning. The mobile gas measuring and gas warning devices from the EX-TEC PM 5xx series make the everyday work of gas fitters, maintenance staff and other technical staff easier. They can be used to locate leaks in freely accessible gas pipes, assess the risk of ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The Long-baseline Optical Anemometer (LOA) measures path averaged crosswind and turbulence over distances of 100 meters to over 10 km. Based on optical scintillation technology, its optics 'see' the always present temperature and density variation in small parcels of air as they move through the infrared beam. OSI's patented LOA sensors are based on advanced technology tested and approved by the ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The MCX-32 controller features a flexible design that allows the user to customize a system by choosing from a selection of individually addressable field devices or use addressable input and output modules. Detcon’s full range of gas sensors (purchased separately) can be used to create a gas detection system consisting of toxic gas, combustible gas, and/or oxygen deficiency. A wide range ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot CO2 is a robust CO2 Gas Monitor that can measure Carbon Dioxide parameters in the air. This CO2 gas detector uses NDIR Sensing technology to measure total CO2 concentration in the air. The monitor is equipped with a CO2 sensor module. The sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Combination measuring devices for gas supply with integrated ethane detector. Products from the EX-TEC HS family combine ergonomics with cutting edge technology. Thanks to its innovative design this range offers the user the right instrument for each different application. All appliances from the EX-TEC HS family meet the requirements of DVGW Code of Practice 465-4 (German Technical and ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
High-technology manufacturing processes often require high-purity gases. The HPGP-101-C High Pressure Gas Probe System provides reliable in-line contamination monitoring for process gases at line pressure. The High Pressure Gas Probe System is compatible with oxygen, hydrogen and most non-toxic gases, and it can be used in many reactive gas monitoring applications. The High Pressure Gas Probe ...
-
PremiumManufactured by Trace2o Ltd.based in UNITED KINGDOM
The Trace2o Arsenometer is a fully portable kit that allows analysis of a water sample on site, detecting levels as low as 5ppb of arsenic. The lightweight, waterproof unit is capable of speciation between Arsenic (III) and Arsenic (V) within 10 minutes without the use of prohibited substances such as mercuric bromide, making the process safer and faster for the user. The tests produce no plastic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you