Toxic Gas Equipment For Health And Safety Near Yukon
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEL-4 QuadSet series is a microprocessor-based up to 4 channels multigas detection and control system that can be used with GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a true RS485 daisy chain communication ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme TwinSet and its microprocessor-based system feature a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of two gases in the following combinations: CO/CO, CO/CO2, CO/ NO2, CO/COMB. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme UniSet, with its microprocessor-based system, features a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of a variety of toxic and combustible gases. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost toxic gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output ...
-
Distributed by Westech Industrial Ltd.based in CANADA
The Rosemount 936 Open Path Toxic Gas Detector provides continuous monitoring for hydrogen sulfide (H2S) gas or ammonia (NH3) gas, even in harsh environments where dust, fog, rain, snow or vibration can cause a high reduction of signal. This device utilizes ultraviolet technology and has long range detection up to 200 ft (60 m). Worldwide approvals for the Rosemount 936 include ATEX, IECEx, ...
-
Distributed by Westech Industrial Ltd.based in CANADA
United Electric Controls (UE) is a privately-held corporation founded in 1931 and headquartered in Watertown, Massachusetts, USA. Focused on protecting equipment, processes, personnel and the environment, UE is a global supplier of toxic and combustible WirelessHART gas detectors, electronic transmitter-switches, pressure and temperature switches, transmitters, sensors and controls for the ...
-
Manufactured by RKI Instruments, Inc.based in USA
The RKI M2A is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
HORIBA, Ltd. has released a new portable sulfur analyzer, the SLFA-60. Sulfur analyzers are used to measure sulfur compounds present in heavy oil, gasoline, diesel oil etc. as impurities that convert to toxic gases. Shale oil, a promising alternative to crude oil, can contain high concentrations of impurities, including sulfur. Sulfur analyzers thus serve in quality management of petroleum ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
TXgard-IS+ is a Intrinsically Safe (I.S.) toxic and oxygen gas detector with local LCD display. A wide choice of sensors are available for use in a variety of applications. TXgard-IS+ is ATEX certified for use in Zone 0,1 or 2 hazardous areas, and also UL and cUL certified for use in Division 1 or 2 hazardous ...
-
Manufactured by Mettler - Toledo Int. Incbased in SWITZERLAND
To understand and optimize chemical reactions over a wide range of temperature and pressure conditions, chemists and chemical engineers require in-depth reaction information. This data has traditionally been obtained via offline techniques that require extraction and sample preparation which is therefore not a true representation of the reaction components. ReactIR 45m is a real-time, in situ ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
Designed for use in Zone 1 or Zone 2 hazardous areas, the air aspirated system uses a compressed air driven vacuum generator to draw a gas sample from a single point. Explosion- proof gas detectors are fitted to monitor for flammable gases, toxic gases or oxygen. Each detector provides a 4-20mA output. An intrinsically safe flow-fail device warns if the sample flow is lost due to supply air ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
Triple Plus+ is the latest generation of the respected 'Triple' family of toxic, oxygen and flammable gas detectors. With over 90,000 units sold to oil and gas, chemical, utility and manufacturing companies worldwide, their combination of ruggedness, reliability, ease of use and sensor flexibility has set the standard for multigas ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
QRAE 3 is a versatile, rugged, one- to four-sensor pumped or diffusion gas monitor that provides continuous exposure monitoring of oxygen (O2), combustibles, and toxic gases, including hydrogen sulfide (H2S), carbon monoxide (CO), sulfur dioxide (SO2) and hydrogen cyanide (HCN) for workers and responders in hazardous ...
-
Manufactured by RKI Instruments, Inc.based in USA
Built around RKIs latest smart sensor technology, the SC-01 is a versatile single toxic gas monitor. The smart sensors are interchangeable, with the SC-01 automatically recognizing any sensor change without any set up or configuration changes. The sensors calibration information also stays with each sensor. Weighing only 7.6 ounces, it has many features which set it apart from the competition. ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
TXgard Plus is a flameproof (Ex d), ATEX and UL certified toxic or oxygen gas detector with local LCD display. A choice of sensors are available enabling use in a wide range of applications, including water treatment, oil and gas exploration, chemical plants and steel production. ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
This full-featured single-gas monitor is compact and light enough to clip onto a uniform or belt, which provides personal protection in a range of environments. The ToxiRAE II continuously displays gas concentration, short-term exposure limit (STEL), time-weighted average (TWA), and peak values for one of more than 10 toxic gases, or users can elect to measure for sufficient oxygen. With an ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
Compact, reliable and easy-to-use, the ToxiRAE Pro doesn’t get in the way of workers doing their job and provides unmistakable five-way local and remote alarms if a threat is detected or a man is down. Plus, it offers the flexibility of easily swappable sensors to monitor for different gases in different situations. This personal, wireless monitor for toxic gases and oxygen keeps workers ...
-
Manufactured by RKI Instruments, Inc.based in USA
Gas detection should not be complicated. The Beacon 110 is gas detection simplified. The Beacon 110 is a powerful, low cost fixed system controller for one point of gas detection. It is microprocessor controlled, versatile, simple to install and operate, and priced to be the industry's best value single gas detection controller. It is capable of accepting RKI sensors directly for LEL level ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
A high quality infrared fixed-point detector that delivers dependable detection of freon gases. Available for detecting a range of different refrigerant gases and also sulphur hexafluoride (SF6), the Crowcon F-Gas Detector can be connected to any control system that accepts an analogue signal. Housed within an IP54 rugged enclosure, the F-Gas Detector is suitable for use in non-hazardous areas ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you