Toxic Metal Applications available in Australasia
-
Premium
Determination of zinc in water by fluorimetric method
In accordance with WHO’s Guidelines for Drinking Water Quality there is no health-based guideline value of zinc in water concentration. Concentration of zinc in tap water can increase as a result of its dissolution from pipes. Also, elevated levels of zinc may be an indicator of increased concentrations of other toxic metals; thereby zinc in water analysis is an essential analytical task. Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of zinc ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
XRF Spectrometers solutions for environmental monitoring sector
Analysis of heavy metals in objects, such as water, soil and air, is an important part of environmental activities. The X-ray fluorescence analysis method is widely used to solve the needs of environmental monitoring. Elvatech offers special XRF spectrometers and analyzers for laboratory studies of toxic elements in various natural ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
Determination of Toxic Trace Elements
Analytical solutions for toxic elements for better risk assesment. Over the last centuries a considerable increase of toxic elements such as arsenic, cadmium, lead and mercury in the environment has been observed. Human activities and industrialization in particular have contributed to significant release of these naturally occurring elements, hence leading to an accumulation in the food chain. These elements can have adverse effects on organisms and lead to severe illnesses, organ malfunction and even death. ...
By Analytik Jena - an EndressHauser Company based in Jena, GERMANY.
-
Waste Management Solutions for Mining Wastes
Mining waste typically arises from the limitation of the installed technologies of an operation, e.g. where fines cannot be tolerated. They are associated with mine workings and often contain valuable and/or hazardous materials. The hazardous content, which are often the valuable fractions within this waste are typically metals. Spread of metal toxicants in association with tailings particles, through a combination of wind dispersion or if washed into the soil or rivers, can have a highly damaging effect on the ...
By Tetronics Technologies Limited based in Swindon, UNITED KINGDOM.
-
Waste recovery for energy & utilities
In order to stay competitive and to be seen as being environmentally responsible, energy and utility companies are always looking for alternative routes to generate power. One method of doing this is by leveraging waste to energy incineration plants linked to the processing municipal solid waste. During this incineration process, APC residues, which are a mixture of fly ash, organic pollutants (including dioxins and furans), are generated and are classified as hazardous waste and have a detrimental environmental ...
By Tetronics Technologies Limited based in Swindon, UNITED KINGDOM.
-
EDXRF spectrometers for pharmaceutical industry
The pharmaceutical industry is one of the most regulated industries. Contaminants in drug products are examined throughout the manufacturing process, since their presence affects drug stability, behaviour and toxicity. Therefore, regulatory bodies such as the European Medicines Agency (EMEA) and the American Food and Drug Administration (FDA) strictly enforce continuous and ongoing analysis of organic or inorganic impurities from raw materials, excipients and Active Pharmaceutical Ingredients (API) through ...
By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.
-
EDXRF spectrometers for mining & mineral industry
Xenemetrix advanced ED-XRF spectrometers provide on-site quantitative analysis of mining products, thereby reducing the time for receiving results from days to seconds, compared to time consuming laboratory analysis. Materials recovered by mining, minerals or other geological materials that originate from the earth consist of all kinds of base metals - precious metals, iron, uranium, coal, diamonds, limestone, oil shale, rock salt and potash - all of which can be efficiently analyzed by Xenemetrix outstanding ...
By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.
-
Water Treatment Solutions for Turbidity Removal
Turbidity is a measure of the loss of light transmittance through a liquid due to suspended particles. The more particles in the water, the murkier it looks or the higher the turbidity. This is a measure of the quality of the water. It is measured in units called Nephelometric Turbidity Units (NTU). Turbidity can be caused by run off after a heavy rain as erosion washes soil into a river or lake. It is often increased in the spring and fall when the water temperature at different levels in a lake change causing a ...
By ChartWater™ - A Chart Industries Company based in Duluth, GEORGIA (US) (USA).
-
EDXRF spectrometers for petroleum & petrochemical
Oil and fuel analysis - compliance with ASTM standard methods and other regulations. Xenemetrix state-of-the-art ED-XRF analyzers offer solutions for the Petroleum & Petrochemical analysis that comply with ASTM standards and regulations. Our superior solutions cover the full production process, starting from research & development up to process and quality ...
By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.
-
EDXRF spectrometers for forensics industry
Fingerprinting all kinds of materials analyzed in forensic analysis Forensic scientists generally require fast and non-destructive analysis of a very wide range of materials. Often these materials are presented in very small quantity, as evidence collected from a crime scene. Using ED-XRF allows to measure a wide range of elements and concentrations: C(6)-Fm(100), without any need of sample preparations. Samples can be measured in many different formats such as powder, solid, liquid or in thin ...
By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.
-
Water treatment solutions for wastewater and effluent treatment industry
The amount of wastewater and effluent getting generated is steadily increasing with increased urbanization, economic growth and many other socio-economic factors. Today, nearly half of all the water that gets treated is wastewater. The primary concern of wastewater disinfection is the removal of pathogenic microorganisms. Secondarily, wastewater discharge should not contain compounds with environmental health impacts. While a chlorine residual is desirable in drinking water treatment, it is not desirable in ...
By Pristine Water based in New Delhi, INDIA.
-
Absorbents for environmental applications
Geohellas natural and enhanced porous clay products can be used in a variety of important environmental applications, which take advantage of the products’ ability to adsorb and immobilize heavy metals and other toxic chemicals. Selectively mined products based on attapulgite, may be used in a plethora of environmental applications ranging from contaminated land rehabilitation to adsorption of heavy metals from water effluents and industrial exhaust gases. Attapulgite may be used as part of environmental ...
By Geohellas S.A. based in Athens, GREECE.
-
Membrane Water Treatment and Monitoring Products for Food & Beverage
Monitoring in raw water can provide operators with immediate information to facilitate adequate treatment. Trace (heavy) metals can naturally occur in surface and ground waters or may arise from industrial environmental discharge. ...
By Modern Water Inc. based in New Castle, DELAWARE (USA).
-
Membrane Water Treatment and Monitoring Products for Oil & Gas
Innovative solutions that improve corrosion prevention and drilling fluid management. Microbiologically Induced Corrosion (MIC) costs the oil and gas industry billions of dollars each ...
By Modern Water Inc. based in New Castle, DELAWARE (USA).
-
Wastewater evaporator Solutions for the printing wastewater treatment
Printing and Photo Processing Wastewater Treatment and Disposal. The printing industry and photographic processing produce a tremendous amount of waste water, from washing prints, cleaning between color changes, cleaning ink shipping containers and cleaning ink delivery systems. The wastewater produced is often contaminated with heavy metals and other highly toxic ...
By Draygon based in Venice, FLORIDA (USA).
-
EDXRF spectrometers for cosmetics industry
During the manufacturing process, cosmetic products need to be chemically analyzed to ensure conforming to product specification and safety regulations, as well as achieving cost-effectiveness in the manufacturing process. Using ED-XRF allows measuring a wide range of elemental concentrations such as C(6)-Fm(100), without a need for sample preparations(heating or destroying the sample). Samples can be measured in the form of loose powders or powders pressed into pellets, and are made ready for measuring within ...
By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.
-
Absorption solutions for heavy metal industry
KMI Zeolite can absorb high amounts of heavy metals including nickel, copper, lead, and cadmium. Zeolite is used to remove toxic heavy metals from water supplies through ion exchange. It acts as a water purifier and decontaminates water ...
By KMI Zeolite Inc. based in Pahrump, NEVADA (USA).
-
Desktop and Cloud Software for Industrial Water & Wastewater Treatment Industry
Design equipment and processes effectively, eliminate toxic contaminants with advanced filtration and chemistry models. Optimize energy utilization and rapidly troubleshoot problems to increase operations ...
By OLI Systems based in Parsippany, NEW YORK (USA).
-
Air Pollution Control Systems for Toxic Heavy Metal and Dioxin Destruction
Toxic heavy metals, in particular mercury and cadmium, may be present in the thermal oxidiser flue gas, and must be abated to meet the site or process disharge permit. Dioxins, furans and PCBs are extremely toxic and their discharge to stack is similarly tightly regulated, with typical dioxin emissions standards 0.05-0.1 ng/m3. Dioxins, furans and PCBs are destroyed by correct thermal oxidation, but dioxins may reform post oxidation by de novo synthesis, typically in the range ...
By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM.
-
Hazardous Waste Shredding for Harmless Processing & Recycling
AIShred can design different crushing solutions for different types of hazardous waste to meet the requirements of environmental and operator protection and different regional hazardous waste disposal standards. For example, the use of fire detection, ...
By AIShred - GEP ECOTECH Co., Ltd based in Zhengzhou, CHINA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you