Vapor Intrusion Equipment For Health And Safety Available In Afghanistan
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT is installed under slab and on below grade vertical walls as a gas vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT spray-application directly to penetrations, footings, grade beams, pile caps and ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT LT is a seamless, spray applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT® LT is installed under slab and on below grade vertical walls as a vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT® LT spray-application directly to penetrations, footings, grade beams, ...
-
PremiumManufactured by CETCObased in USA
For high-risk underslab and below-grade vertical walls, LIQUID BOOT® PLUS combines traditional Liquid Boot® spray-applied membrane with high-performance VI-20™, a 20-mil polyethylene-EVOH copolymer membrane, to form a superior vapor intrusion barrier that’s ideal for VOCs including BTEX and chlorinated solvents. Even greater contaminant resistance is achieved when LIQUID BOOT ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT 500 is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT 500 is economically formulated specifically for horizontal applications. LIQUID BOOT 500 spray application directly to penetrations, footings, grade beams, pile caps and other irregular surfaces, provides for a fully-adhered gas vapor ...
-
PremiumManufactured by AMS, Inc.based in USA
Sample for volatile organic and inorganic compounds from beneath floor slabs. Sub-slab sampling and routine monitoring has become an integral part of vapor intrusion investigations. The AMS Sub-Slab Gas Vapor Probe Kit provides a semi-permanent probe, designed to allow repeated sampling over time in order to assess the potential of contaminated vapor intrusion from beneath buildings and offers an ...
-
PremiumManufactured by CETCObased in USA
ULTRADRAIN consists of an impermeable polymeric sheet cuspated under heat and pressure to form a high flow dimpled drainage core. The core is then bonded to a layer of non-woven filter fabric. The filter fabric retains soil or sand particles as well as freshly placed concrete or grout, allowing filtered water to pass into the drainage core. Ultradrain also has a protection sheet bonded to the ...
-
Manufactured by Terrafix Geosynthetics Inc.based in CANADA
terrafix Environmental Technology is a corporation specializing in the installation of engineered geosynthetics. At terrafix, our people make the difference and our experienced staff works closely with clients to ensure every project is completed on time, within budget and to exacting specifications. Our field technicians are trained in all aspects of Geosynthetic installation and have extensive ...
-
based in UNITED KINGDOM
pk ...
-
based in UNITED KINGDOM
Clips for supporting plate, pk ...
-
Manufactured by Land Science- a division of REGENESIS, Incbased in USA
MonoShield is a chemically resistant and easy-to-apply barrier specifically designed as a preemptive solution for vapor intrusion at brownfield redevelopment sites. It is backed by unparalleled design support, standard industry warranty, and a network of certified applicators who can ensure quality installation. ...
-
Manufactured by Entech Instruments, Inc.based in USA
The 7650 Canister Autosampler brings the automated analysis of MiniCans™, Bottle-Vacs™, and other large volume sampling canisters to a whole new level. Building upon the advantages of its predecessors, the 7650 is the first canister autosampler to facilitate the analysis of up to twenty, 1 to 1.4L canisters while maintaining samples in a completely closed and isolated state until required for ...
-
based in UNITED KINGDOM
Strips to suspend outdoor shelter - pk ...
-
based in UNITED KINGDOM
pk ...
-
based in UNITED KINGDOM
Contains syringes and syringe filters - 0.45um - pk ...
-
based in UNITED KINGDOM
Diffusive body w/cartridge (white/RAD130) - pk ...
-
Manufactured by Liquid Boot, By Trident Environmental Group LLCbased in USA
Venting systems are typically installed in conjunction with a gas vapor barrier when volatile or explosive gases are ...
-
Manufactured by Photon Systems, Inc.based in USA
NaDos is a wearable personal exposure monitor (PEM) and near-real-time environmental chemical exposure monitor with higher sensitivity (3) than a PID and extremely high specificity to naphthalene vapor concentrations in the breathing zone of the wearer. NaDos provides GPS position and time stamped time histories of exposure to naphthalene ...
-
Manufactured by W. R. Meadows, Inc.based in USA
AIR-SHIELD LM (ALL SEASON) is a single-component, liquid-applied, polymer-modified air/vapor and liquid moisture barrier. AIR-SHIELD LM (ALL SEASON) cures to form a tough, seamless, elastomeric membrane, which exhibits excellent resistance to air and moisture transmission. VOC content = 400 ...
-
Manufactured by Land Science- a division of REGENESIS, Incbased in USA
The Retro-Coat Vapor Intrusion Coating System is a complete product line that consists of chemically resistant materials to properly protect existing structures from the threat of contaminant vapor intrusion. A vapor intrusion condition is most commonly found when the existing structure was operating as, or in close proximity to, a dry cleaner, gas station, or manufacturing ...
-
based in UNITED KINGDOM
pk ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you