ventilation duct News
-
Climaver Starts Production in Kuwait
In Middle Eastern countries, where air conditioning works on average 10 months a year, 24 hours a day, insulating aircon and ventilation ducts is essential! Hence KIMMCO-Isover’s decision to rearrange its production facilities and dedicate one of the 3 lines of its insulation plant in Kuwait to the manufacturing of 6th generation of CLIMAVER®. This range produced in Kuwait will have UL ...
By Saint-Gobain
-
Anti-seismic bracket acceptance GB GB
At present, I have passed the earthquake-resistant bracket industry, and I am still in the initial stage. Many relevant GB national standards have not been perfected. According to the national standard “Building Seismic Design Code” GB50011-2010, Article 13.4.3 and “Building Electromechanical Engineering Seismic Design Specification” GB.003.1-2014, Section 3.1.3 are ...
-
ComfortSense Mini – Compact and Robust single point anemometer for draught and ventilation measurements
The ComfortSense Mini is a compact and robust single point anemometer that covers a wide range of applications within indoor climate measurements. Draught rate can be measured according to the ISO 7730 standard. For automotive applications, ComfortSense Mini with a 54T34 Draught probe Manikin can be built into thermal manikins to measure the airflow at a certain point of a body. The 54T33 ...
-
In this special diamond jubilee year, Tenmat is awarded the Queen`s award for innovation
TENMAT is proud and honoured to have been awarded the Queen's Award for Innovation 2012. TENMAT has been at the forefront of composite material innovation and manufacture for many years in the areas of Wear components, Fire protection, Engineering ceramics and High temperature resistant materials and this prestigious award reflects this constant innovation which enhances the performance of our ...
By Tenmat ltd
-
Test metal, concrete & other surfaces for residual oil contamination
Surficial sampling and analysis is used to assess the existence and/or extent of oil contamination on various surfaces, rather than in soil, sediment or water. Applications include testing wipe samples for residual oils coated on aluminum, steel or other metal parts after the manufacturing process. This includes ventilation ducts, fans, AC coils and other metal working processes to see how well ...
-
AGREEMENT’S SYNERGIES TO BENEFIT ANODIZERS, METAL FINISHERS
Tri-Mer Corporation, a manufacturer of advanced air pollution control systems and auxiliary equipment, and Gary Kriesch & Associates, LLC, a specialist in the design and manufacture of anodizing systems, have established a joint working agreement, according to Tri-Mer CEO John Pardell. The working agreement will integrate resources from both companies, fusing their diverse strengths to ...
-
Discover our advanced solution for aerosol detection!
Bertin Instruments’ BAB A7 aerosol beacon is a state-of-the-art device in the field of aerosol detection. Thanks to its advanced technology and innovative design, the BAB A7 has become a leading device in the monitoring and measurement of the concentration of artificial Alpha and Beta radioactive aerosols. The aerosol beacon is a device for detecting and monitoring aerosols in the air. ...
-
Efficient dosing solutions for simple everyday dosing processes sera’s new standardised dosing unit CTD
Planners and buyers in the dosing market may recognise the following situation: You have to find a suitable and reasonably priced solution for a simple dosing task. Since you are on a tight budget with a limited time frame there is no room for either expensive engineering or extensive delivery times. An efficient and simple solution, which can furthermore easily be installed and maintained, is ...
By Sera GmbH
-
2011 AHR Expo Displays Cutting Edge UV & Molecular Filtration Products
UltraViolet Devices (UVDI) will be showcasing the latest indoor air quality (IAQ) solutions later this month. From January 31st through February 2nd over 45,000 visitors from all 50 states and 120 countries will be attending the 2011 AHR EXPO in Las Vegas, Nevada. The AHR EXPO is the world’s largest HVACR exposition. One of the most anticipated exhibits at this year’s event ...
-
Removal of building crane important step in demolition
A building crane in one of Dounreay’s shut-down facilities became a waste package itself when a much larger crane reached in through the roof and lifted it off its rails. The decontamination and waste handling facility, code named D1207, was built to serve Dounreay’s chemical plants and the next door Vulcan site. The electrical overhead travelling (EOT) gantry crane, which had a 7.5 ton ...
-
Virtual tour of Salher’s sewage treatment plant for a dairy industry
Salher is a benchmark in the industrial water treatment sector. Its latest plant of this type is designed to treat wastewater generated in the manufacture of dairy products and, thanks to a membrane technology system, to reuse the treated water for cleaning the plant. This new WWTPI aims to reduce pollutant loads to the values required for discharge into a municipal sewer. This line of water ...
By Salher
-
Airplus has launched its new product: Axial Jet Fan
AIRPLUS has launched its new product: Axial Jet Fan. Specifications of one of the models of new AIRPLUS Axial Jet Fan which was launched at ISK-SODEX Exhibition: AP-AJF-400-2/4 are as follows: Usage for smoke evacuation in case of fire and daily ventilation. It provides a safest way to remove smoke and high temperatures under control in case of fire (Ventilation at low speeds, smoke evacuation ...
By Airplus
-
How to drive the Circular Economy in the auto sector
A new set of legislative drivers which use ‘more carrots, less sticks’ is needed if the automotive sector is to deliver greater sustainability within the Circular Economy for recycled plastic content in new vehicles, suggests a leading plastics recycler. Fresh strategies are required, such as rewarding ‘desirable’ behaviours and encouraging individual producer ...
By Axion Group
-
EPA announces guidance to communities on PCBs in Caulk of buildings constructed or renovated between 1950 and 1978
The U.S. Environmental Protection Agency today announced a series of steps that building owners and school administrators should take to reduce exposure to PCBs that may be found in caulk in many buildings constructed or renovated between 1950 and 1978. The agency is also conducting new research to better understand the risks posed by caulk containing PCBs. This research will guide EPA in making ...
-
Where to use anti-seismic hangers
According to the national standard GB50981-2014 “Earthquake Design Code for Electrical and Mechanical Engineering of Buildings” issued by the Ministry of Housing and Urban-Rural Development in 2015, the design and use of seismic support hangers are clearly defined. The implementation of the standard from August 1, 2015 also means that the construction of mechanical and electrical ...
-
Dirty Air Ducts Impact the Air Quality of Buildings in New York City
New York has the highest population density of any major city in the United States, with over 27,000 people per square mile. To support this many people, the city and surrounding suburbs are filled with millions of homes, schools, offices, and industrial complexes. In many of these buildings, air ducts play a pivotal role in keeping people comfortable and productive. This critical component of a ...
By VOETS, LLC
-
Integral Group earns 9th and 10th LEED platinum certifications
Integral Group (formerly Rumsey Engineers) today announced that the Moraga Barn, in Moraga California and ClimateWorks Headquarters Phase 2, in San Francisco California were both awarded LEED Platinum certifications by the USGBC. These are the firm's 9th and 10th LEED Platinum certified buildings for the Oakland office. Integral specializes in the design of simple, elegant, cost-effective HVAC ...
-
Environmental concerns spur growth in the South African HVAC market, observes Frost & Sullivan
The top five vertical industries in the South African heating, ventilation and air conditioning (HVAC) market are currently experiencing significant growth due to greater energy efficiency awareness. Mounting pressure on energy resources in the country has also increased the drive for new, energy-efficient HVAC equipment and upgrades of existing equipment. New analysis from Frost & Sullivan ...
-
Suzlon global headquarters `One Earth` receives `LEED Platinum` certification
New corporate HQ achieves top sustainability certification, making it one of the world's greenest Campus powered 100 percent by renewable energy Pune/Washington, D.C.: Suzlon Energy Limited (SEL), the world's third-largest* and India's largest wind turbine manufacturer accepted on Thursday, April 29, the Leadership in Energy and Environment Design (LEED) Platinum award for its new corporate ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you