accelerometer Equipment available in Utah

Available in Utah| Near Utah
128 Results found

We couldn't find any accelerometer equipment in Utah

Here is a list of results available in Utah

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Health & Safety ×

  • Subcategory: Vibration Control ×

  • Keyword: accelerometer ×

  • Available in: USA ×

  • Available in: Utah ×

Brüel & Kjær - Model Type 4527 - Triax Accelerometer

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

Designed to operate continuously at 180°C (356°F) to meet the toughest environmental requirements, the wide 0.3Hz to 10 kHz frequency range and low weight of Triaxial CCLD Accelerometer Types 4527 and 4527-001 make them equally suitable for use as general purpose accelerometers. When only a single- or dual-axis measurement is needed, these ...

Model SV 150 - Tri-Axial Acceleromete

by Svantek Ltd.     based in Warszawa, POLAND

SV 150 is a tri-axial accelerometer designed to be used with the SV 106 human vibration analyser to provide a dedicated instrument for measurements according to ISO 5349-2. The accelerometer can easily be attached to the handle of the vibrating tool being measured. The sensor's TEDS memory stores information about calibration factor limiting ...

VibroSystM - Model VSM797S - Low Frequency Piezoelectric Accelerometer

by VibroSystM Inc.     based in Longueuil, QUEBEC (CANADA)

The VSM797S is a hermetically sealed piezoelectric accelerometer designed to measure absolute vibration in harsh industrial environments. It incorporates a low-pass filter within the conditioning circuit to attenuate the sensor's mechanical resonance as well as the associated distortion and overload. The sensor features a low noise and temperature ...

Accelerometers

by PCH Engineering A/S     based in Horsholm, DENMARK

In our range of accelerometers we are confident you will find the transducer type, which will fit your application. A transducer has a nominal sensitivity. A Calibration Certificate follows each transducer telling the exact sensitivity, which naturally is within the specified tolerance. Low tolerance transducers can be supplied on request. All ...

Rieker - Accelerometers

by Rieker Inc     based in PENNSYLVANIA (USA)

Measure acceleration and vibration in machines, vehicles, buildings, safety installations, etc.

Model V9A & V13AP - Accelerometer

by Vemco     based in Bedford, NOVA SCOTIA (CANADA)

The V9A Accelerometer Transmitter and V13AP Accelerometer Pressure Transmitter are the newest addition to the VEMCO family of coded sensor transmitters. The V9A and V13AP transmit 3D acceleration of your fish as they move within your VEMCO receiver array with the V9AP also transmitting depth data. The ...

SENSR - Model CX1 - Accelerometers

by Cautus Geo AS     based in Lier, NORWAY

A new geotechnical sensor with the latest MEMS technology from manufacturer SENSR for dynamic and continuous monitoring of vulnerable structures and unstable land. It can be used to geomonitorering of landslides, bridges, buildings, tanks and other structures. CX1 is a robust, easy to use and highly accurate sensor to detect tilt in two axes, ...

Model Low-g - Accelerometer

by Vernier Software & Technology     based in Beaverton, OREGON (USA)

Use the Low-g Accelerometer to study one-dimensional acceleration in a wide variety of acceleration experiments and demonstrations. The Low-g Accelerometer is the best choice for most acceleration experiments, including Newton’s second law, simple harmonic motion, and the relationship between acceleration and force.

Accelerometers

by Brüel & Kjær Vibro GmbH     based in Darmstadt, GERMANY

For advice on the correct acceleration sensor and installation accessories, we recommend that you discuss your specific application with our specialists to ensure the correct solution.

FOSA 6660 Accelerometer - 6 Channel for End-Winding Vibration

by Optoacoustics Ltd.     based in Or-Yehuda, ISRAEL

Six channel dual axis fiber optical accelerometer for power generators. Fiber optic accelerometer array designed for end winding vibration measurement in power generators. Comprised of six dual axis FOSA 2660 devices.

FOSA 1650 Accelerometer - Medium and Large Structures

by Optoacoustics Ltd.     based in Or-Yehuda, ISRAEL

Single axis fiber optical accelerometer. Miniature fiber optic accelerometer for remote monitoring of vibration in medium and large structures in the presence of strong electrical, EM and RF fields.

FOSA 1760 Accelerometer - Low Profile

by Optoacoustics Ltd.     based in Or-Yehuda, ISRAEL

Thin single axis fiber optical accelerometer. Like the FOSA 1650, but designed for placement in extremely narrow spaces.

Model KS - General Purpose Accelerometer

by Metra Mess- und Frequenztechnik in Radebeul e.K. (MMF)     based in Radebeul, GERMANY

General purpose shear-type accelerometer. Two sensitivity versions. Low sensitivity to temperature transients. Low influence of base bending effects.  IEPE compatible output allows long cables. High linear band width up to 37 kHz. Low noise, high resolution. Sturdy stainless steel housing. M5 mounting thread in base

FOSA 1660 Accelerometer - Extended Temperature Range

by Optoacoustics Ltd.     based in Or-Yehuda, ISRAEL

Single axis fiber optical accelerometer with extended temperature range. Similar to FOSA 1650, but designed for operation over an extended temperature range.

Model AMA Series - Analog MEMS Accelerometers

by Jewell Instruments LLC     based in Manchester, NEW HAMPSHIRE (USA)

Jewell Instruments AMA Series Accelerometers are an excellent choice for cost to performance trade off. The AMA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.

Model DMA Series - Digital MEMS Accelerometers

by Jewell Instruments LLC     based in Manchester, NEW HAMPSHIRE (USA)

Jewell Instruments DMA Series Accelerometers are an excellent choice for cost to performance trade off. The DMA is based on silicon micro-machined MEMS Capacitive Accelerometer technology and designed for low power and high stability.

Jewell Instruments - Model ASB Series - Angular Accelerometer

by Jewell Instruments LLC     based in Manchester, NEW HAMPSHIRE (USA)

The Jewell ASB Series Angular Accelerometer is a general-purpose ±200 radian/second2 to ±1000 radian/second2 device for industrial, commercial and aerospace sensing requirements.

Jewell Instruments - Model DXA-100/200 Series - Single or Dual Digital Accelerometer

by Jewell Instruments LLC     based in Manchester, NEW HAMPSHIRE (USA)

±0.25 to ±2.00g Full Range. RS485 and RS422 Outputs. Mechanical Shock 1500g 1 msec ½ sine. Resolution 0.001°. CE Certification Pending Approval.

FOSA 2660 Accelerometer - Extended Temperature Range

by Optoacoustics Ltd.     based in Or-Yehuda, ISRAEL

Dual axis fiber optical accelerometer for remote monitoring of vibration in two orthogonal directions. Ideal for laboratories or where the accelerometer is a sub-component in another device or system.

FOSA 2650 Accelerometer - Standard

by Optoacoustics Ltd.     based in Or-Yehuda, ISRAEL

Dual axis fiber optical accelerometer. Dual axis fiber optical accelerometer for remote monitoring of structural vibration in two orthogonal directions.

Need help finding the right suppliers?

Let the XPRTs do the work for you