noise and vibration Equipment available in Belarus

Available in Belarus| Near Belarus
98 Results found

We couldn't find any noise and vibration equipment in Belarus

Here is a list of results available in Belarus

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Health & Safety ×

  • Subcategory: Vibration Control ×

  • Keyword: noise and vibration ×

  • Available in: Europe ×

  • Available in: Belarus ×

01DB - Model dB4 - 4-Channel Portable Noise and Vibration Analyser

by ACOEM     based in Limonest, FRANCE

dB4 is a portable noise and vibration analyser consisting of a USB2.0 4-channel acquisition unit combined with one of the software program of the 01dB range (dBFA or dBENV). Connected to the computer through the USB port, the dB4 system offers 4 synchronised 24-bit ICP inputs for performing operating, both in portable and fixed mode.

Brüel & Kjær - Model LDS PA Series - Linear Power Amplifiersr for Vibration Test Systems 25 W to 1000 W

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

The PA series of linear power amplifiers ranges in power output from 25 W to 1000 W and are designed to support LDS vibration test system's power both permanent magnet shakers and small electrodynamic shakers. These amplifiers are also used extensively to power 3rd party shakers.

Svantek - Model SV-104-Noise-Dosimeter - Personal Noise Dosimeter

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

Until the introduction of the SV 104 Personal Noise Dosimeter, noise dosimeters only did half the job of protecting workers from noise dose exposures. Traditional noise dosimeters only determined the dose exposure level and could not provide hearing protection data found in octave band analysis. The SV 104 Personal Noise Dosimeter is the only ...

Vibration Measurement

by TÜV Nord Gruppe     based in Hamburg, GERMANY

The term 'quake-like vibrations' refers to the vibration of the subsurface, building material or workplace, which is transferred by solid bodies. Quake-like vibrations can cause damage to buildings, shake up people inside the buildings or affect sensitive equipment. Structure-borne sound can lead to irritating noise in rooms connected structurally ...

Norsonic - Model Nor150 - Sound and Vibration Analyser

by Norsonic AS     based in Lierskogen, NORWAY

The sound and vibration analyser Nor150 sets new standards in user-friendliness. Featuring the largest colour touchscreen in a handheld meter on the market today, the Nor150 provides the user friendliness of a smartphone. Further features include, built in web server, camera, GPS and advanced voice and text notes bringing the sophistications ...

SV - Model 102 - Single or Dual Channel Noise Dosimter

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

Noise Dosimeter for Workplace Safety, Occupational Health and Industry. SV 102 dual-channel instrument presents completely new approach to occupational health and safety acoustic monitoring task. The binaural dose measurement and 1/1 octave analysis are simultaneously performed. Octave analysis providing direct data for ear-protectors designing ...

Pneumatic Linear Vibrators

by Inwet S.A     based in Chorzow, POLAND

Generate linear oscillations. Low noise level, minimal air consumption.

Model SES 6000 - Shock Mount

by WillBrandt Gummitechnik     based in Hamburg, GERMANY

WILLBRANDT shock absorbers are used for protection from severe shock and provide high isolation against structure borne noise. Type SES 6000 was designed for very heavy loads, up to 25,000 kg.

Soilspy Rosina - Multichannel Digital System

by Micromed Geophysics     based in Mogliano Veneto (TV), ITALY

Soilspy Rosina is the new hardware and software concept of multichannel digital system for all active and passive seismic surveys. Soilspy Rosina consists of a digital data transmission cable along which the amplification/digitization modules are set, each one to be connected to a sensor (commonly geophones). This allows a higher signal quality ...

Model PCH 4050 - Vibration Checker

by PCH Engineering A/S     based in Horsholm, DENMARK

The PCH 4050 Vibration Checker is easy to use and very handy. It measures the vibration level in the 10 - 1000 Hz frequency range in velocity, acceleration and displacement. The PCH 4050 complies with the DIN/ISO 10816 standard. Furthermore the PCH 4050 can measure bearing noise in the 1 kHz - 10 kHz area. Using the PCH 4050 is an easy way of ...

Model PCH 4051 - Vibration Checker

by PCH Engineering A/S     based in Horsholm, DENMARK

The PCH 4051 Vibration Checker is easy to use and very handy. It measures the vibration level in the 10 -1000 Hz frequency range in velocity,acceleration and displacement. The PCH 4051 complies with the DIN/ISO 10816 standard. Furthermore the PCH 4051 can measure bearing noise in the 1 kHz - 10 kHz area. Using the PCH 4051 is an easy way of ...

Model RHV 1500 - Rotary Vibratory Head

by EURODRILL GmbH     based in Drolshagen, GERMANY

Design Features RHV 1500: Modular and compact design requires only small room. Strong bearing system of the main shaft which is designed as a hollow shaft for most diverse drilling applications and drilling methods. Permanent lubrication and cooling via an integrated hydraulically system. Compatible to drill rigs of all manufacturers for different ...

Pneumatic Knockers PKL Serie

by URBAR Ingenieros, S.A.     based in Asteasu, SPAIN

High impact power. Low compressed air requirement per impact. Low noise versions with elastomer insert EE. Versions with automatic control ST. ATEX or stainless steel versions available.

SVAN - Model 955 - Low Cost Type 1 Sound Level Meter

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

SVAN 955 is all digital, Type 1 sound level meter. Instrument is intended to general acoustic measurements, environmental noise monitoring, occupational health and safety monitoring.

Vibra-Check - Model VM2800 & VM3800 - Vibration Meter

by Metrix Instrument Co.,     based in Houston, TEXAS (USA)

The economical and compact Vibra-Check™ Vibration Meter is an ideal tool for obtaining spot measurements of machinery vibration. All three useful measurements are possible. Displacement, velocity, and acceleration modes allow a user to perform basic vibration analysis. The robust high temperature accelerometer sensor has a removable magnetic ...

Model Vibro-WS - Antivibration Supports For Gypsumboard Partitions

by ALPHA ACOUSTIKI Ltd.     based in Halandri, GREECE

Vibro-WS is a specially designed homogeneous elastomeric support systems for gypsumboard partitions. The semi-cylindrical modulation at their base (for WS.75 & 100) and the transversal holes (for WS.50), provides the necessary space for the rubber expansion to increase the deflection and consequently the vibration insulation. The inclined ...

DELTA OHM - Model HD 2070 - Three channel vibration analyzer

by Delta OHM S.r.L.     based in Caselle di Selvazzano, ITALY

Three channel vibration analyzer HD2070 is a portable vibration analyzer performing spectral and statistical analysis on three channels simultaneously. The instrument measures all parameters required by current regulations concerning workers protection from vibration related risks and is able to measure vibrations transmitted to both hand-arm and ...

CVK HealthVib - Model WBV 300/500 - Whole Body Vibration Measurement System

by CVK Vibration & Noise AB     based in Lulea, SWEDEN

HealthVib® WBV 300 system measures and analyses i.e. on driver seat or standing as required by ISO-2631 and EU-directive 2002/44/EG. Measuring using HealthVib® WBV is easy to learn and carry out. The vibration data is collected and analysed in three directions simultaneously. Through the use of button controls, results can be displayed as ...

Scalar Controller

by Data Physics Corporation     based in San Jose, CALIFORNIA (USA)

The SignalStar Scalar controller is designed as a capable and user friendly vibration controller suitable for small channel count applications. Scalar offers the same control quality as the high powered Vector because it shares the DSP architecture and control algorithms with SignalStar Vector and Matrix. Scalar can be configured to meet your ...

Cubic - Engine RPM sensor Based on Vibration and Noise

by Wuhan Cubic Optoelectronic Co., Ltd     based in Wuhan, CHINA

Introduction: Use for dynamic and static engine RPM measurement. Use for petrol and diesel engine. Self-calibrating and automatic function monitoring. Universal, connective to any exhaust gas analyzerSpecification:Measure Target: 4 stroke petrol and diesel engines.Signal input: Vibration and noise sensor.Signal output: RS232 and TTL,LCD. Power ...

Need help finding the right suppliers?

Let the XPRTs do the work for you