Vibration Control Software For Health And Safety Available In Senegal
-
PremiumManufactured by Datum Electronics Ltdbased in UNITED KINGDOM
The Datum Hawk project, developed by Datum Electronics in partnership with Strathclyde University’s renowned Marine Engineering department, represents a change in the way that marine vessels will operate planned maintenance across engine rooms across engine rooms, helping improve vessel efficiency and optimisation. Datum Hawk empowers engineers to adopt condition-based maintenance ...
-
based in GERMANY
The Mixed Mode add-on modules for the Random Vibration Control Software allow tests to run with sine tones and/or narrowband random signals superimposed on a random background. Mixed mode testing is a complex control task, and m+p VibControl supports three modes: Sine-on-Random (SoR), Random-on-Random (RoR) and Sine-on-Random-on-Random (SoRoR). Gunfire burst control can also be superimposed in ...
-
Manufactured by Micromega Dynamics SAbased in BELGIUM
The Vib@Work hand-arm range consists of two types of sensor (200G and 5000G) and the '“HASensor” and “HAViewer” software. Used individually or in combination, the vibration dosimeters enable the measurement of the hand-arm vibration exposure of an operator using hand-held or hand-guided vibrating tools in accordance with the 2002/44/EC European directive (commonly known as ...
-
Manufactured by Oros SASUbased in FRANCE
OROS Balancing Solutions are software modules for balancing rigid and flexible rotors. These modules are well-suited for shop balancing or in-situ field balancing. They are designed to run on OROS ...
-
based in USA
Bladed disks vibrate in complex, and often peculiar ways. Within a single IBD, some blades may vibrate strongly in an engine, while others barely at all. And two seemingly identical IBDs may vibrate so differently that one fails quickly from HCF while the other operates without issue for its entire ...
-
based in USA
Today’s brake system suppliers are faced with quality requirements that far exceed identifying manufacturing defects. Vehicle OEMs are now calling for the inspection and conformance to resonance frequencies along with the identification of specific mode shapes – such as nodal diameters, infriction, and hat modes. Ensuring that such critical and specifications are met requires a ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
Blaze® software is the ideal data analysis and reporting tool for Industrial Hygiene and Safety professionals. From simple, concise compliance reports to powerful detailed data presentations, Blaze excels in supporting the Spark® family of personal Noise Dosimeters and the HVM100 Human Vibration ...
-
based in GERMANY
Random control is one of the two basic and most common excitation modes for Environmental Shaker testing. Random performs real-time closed-loop control of PSD profiles. The m+p VibControl vibration control system allows the user to designate all input channels as control, watchdog and/or measurement channels. ...
-
based in GERMANY
Data reduction systems with or without time history recording to throughput disk are frequently used in critical aerospace testing applications where complete measurements of a high number of channels are required for post-test and possible failure analysis. The m+p VibControl data reduction system configurations are tailored to the specific needs of high-performance measurement applications ...
-
Manufactured by ACOEM GROUPbased in FRANCE
The 01dB WebMonitoring Version 3.0 is a simple and efficient solution for environmental noise and vibration monitoring. Its features include the supply of monitoring stations with pre-set parameters, cloud data storage, display of measurement data via a customizable website, real-time alarms, and periodic system checks. 01dB now offers a simple and efficient solution for noise and vibration ...
-
Manufactured by Data Physicsbased in USA
Sine Vibration Control is Used to Qualify a Test Article or to Excite its Resonances to Test Durability. Swept Sine testing is the primary tool for characterizing the dynamics of a test article. Sine testing delivers sinusoidal excitation to the article under test, controlling the excitation level through a pre-defined frequency range. ...
-
Manufactured by Data Physicsbased in USA
Random Vibration is representative of the broad range of vibration environments that products and structures experience during their lifetimes. Random vibrations excite all of a structure’s resonant frequencies simultaneously, often simulating the environment the structure will see when it is in the field. Short or long duration random vibration tests are used to ensure a product or ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
LD AtlasTM is a free mobile app for use with your new Larson Davis equipment. Install LD Atlas on your phone or tablet – available for both iOS and Android – and connect to your SpartanTM Noise Dosimeter Model 730, SoundAdvisorTM Sound Level Meter Model 831C, and Human Vibration Meter Model HVM200. Connect to your meter and use LD Atlas to easily check on the status of your meter, ...
-
Manufactured by Oros SASUbased in FRANCE
ORBIGate is the dedicated software module for industrial rotating machinery vibration during diagnostics as well as acceptance works. Easy to use, it provides all the tools to bring the highest level of set-up simplicity and efficiency to the user. Featuring simultaneous portable acquisition on up to 32 dynamic channels, an entire machine train can be tested during transients or steady states. ...
-
Manufactured by ACOEM GROUPbased in FRANCE
The dBMAESTRO software allows for the processing and analysis of occupational vibration exposure measurement data on workers. Associated with the VIB vibration dosimeter, it allows meeting the requirements of current regulations and Standards ISO5349-1/2 and ...
-
Manufactured by Thermotron Industriesbased in USA
Thermotron’s WinVCSII Controller has a familiar look and feel and is made specifically for use with an electrodynamic vibration shaker and vibration test system. It is designed in-house by Thermotron software and hardware engineers and offers vibration control and analysis for accurate sine, random, shock, resonant search and dwell, random-on-random, sine-on-random, and sine-on-random ...
-
Manufactured by Micromega Dynamics SAbased in BELGIUM
The Vib@Work Whole-Body products range comprises 3 sensors (Seat, Floor and Detect) and the EvecSensorDuo software. Used alone or in combination, these sensors have been designed to measure whole-body vibration exposure for seated and standing operators, and calculate the seat’s efficiency factor, called ...
-
Manufactured by ACOEM GROUPbased in FRANCE
dBTRAIT is a performing software program dedicated to the post-processing of sound, vibration and weather data originating from the main acquisition systems by 01dB: DUO, SOLO Black Edition, dB4 associated with ...
-
Manufactured by Oros SASUbased in FRANCE
Order analysis and tracking techniques are essential in measurements with varying rotating speeds. Getting correct results from run-up/down requires specific signal processing ...
-
Manufactured by GeoSonics/Vibra-Tech Inc.based in USA
GeoSonics/Vibra-Tech has unparalleled experience in the development of analysis software, programming options and equipment for virtually any seismic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you