VOC Detection Equipment For Health And Safety Available In North Dakota
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
airmo HCHO is designed for the measurement of formaldehyde in air or pure gases. The airmo HCHO is an autoGC using FID detector dedicated to Formaldehyde monitoring at low concentration. This instrument uses a valve with a single sorbent trap, a metallic column and a ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme REF-IR-ST Sensor/Transmitter is designed to detect the presence of refrigerant leaks in enclosed areas. The REF-IR-ST series employs a high-precision NDIR sensor ideal for gas-specific and accurate measurements of the most commercially used refrigerants. With its 1PPM resolution, 0-1000PPM measuring range, and operating temperature and humidity characteristics, the REF-IR-ST far exceeds ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot VOC is a robust VOC Gas Monitor that can measure Volatile Organic Compounds in the air. This VOC gas detector uses photoionization detection (PID) technology to measure total volatile organic compounds in the air. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The vigi e-nose is an analyzer able to track VOCs, Sulfur compounds and other molecules as ammonia for example. It allows to provide a rich global fingerprint to correlate with human sensory evaluation as dynamic olfactometry as example. It is possible to train the vigi e-nose with human sensory samples to study correlation with ASTM 679-E04 or EN ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Nitroxychrom is a gas generator providing high purity (grade : 99.9995%) of nitrogen used as carrier gas dilution gas for autoGC PID (for VOCs) and MEDOR (for sulfur compounds). Associated with internal calibration tubes, it allows to use specific components without oxidation ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR EX660 is a compact and lightweight multi gas detector that continuously measures combustibles, O2, CO, H2S and other toxic gases in ambient air. With up to 6 sensors, it can detect at most 7 gases at the same time. Its functional and watertight design (IP 66) incorporates a rugged impact resistant, rubberized housing to meet the toughest requirements of harsh ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC PID for automatic monitoring of compounds, in air, water or soils: This instrument uses a port valve with a loop, and a metallic 0.53 mm ID column. It has a minimum detection level of ppb. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data storage is integrated in a 19' rack 4U. Isothermal oven in standard (programmed ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Volatile Organic Compounds Detector, REF-IR-ST Sensor/Transmitter, is designed to detect the presence of refrigerant leaks in enclosed areas. The REF-IR-ST series employs a high-precision NDIR sensor ideal for gas-specific and accurate measurements of the most commercially used refrigerants. With its 1PPM resolution, 0-1000PPM measuring range, and operating temperature and humidity ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Methane, Non-Methane Total Hydrocarbons and Total Hydrocarbons with ChromaTHC-OCU. When odor issues occur at an industrial site, rapid diagnosis must be done to define the best source treatment strategy. Manual sampling techniques can lead to problems during sampling and transport to the laboratory for analysis. Therefore, there is a need for online analyzers to monitor odors constituents such as ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Hydroxychrom is a gas generator providing high purity (grade: 99.9995%) of hydrogen used as carrier gas or fuel gas for autoGC FID (for VOCs) and FPD (for sulfur compounds). Generator of high purity hydrogen used a carrier gas for airmoVOC and chromaFID analysers as well as for the FID flame. Hydroxychrom is a high purity hydrogen generator and an important tool for the incoming H2 of FID, FPD ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
CH4 and Non Methane Total Hydro Carbon (NMTHC) Monitoring and analysis of Methane and Non-Methane Hydrocarbons by flame ionisation detection (ppm level analysis). The CHROMATHC is an automated isothermal industrial gas chromatograph dedicated to the analysis of volatile organic compounds in air (indoor, outdoor, combustion), industrial hygiene, pure gas like N2/CO2/O2. ...
-
Manufactured by PID Analyzers, LLCbased in USA
The Model 301-C PGCs are flexible and versatile Analyzers that are in their fourth generation. The addition of these new Analyzers greatly improves the capability and range of Process Analyzers from ...
-
Manufactured by Chengdu Pulse Optics-tech Co., Ltd.based in CHINA
TVOC Gas Sensor Module Factory: High Resolution TVOC Detection Modules, Slow Rate of Decay, Gas Sensory Semiconductor Principle, DC 4.8-5.2V, TTL ...
-
Manufactured by EXROBOTICSbased in NETHERLANDS
The ExR-2 is the more advanced brother of the ExR-1. The ExR-2 is designed to be fully autonomous and for this the robot has a powerful LiDAR and an AI/ML computer unit on board. The LiDAR robot has situational awareness of its environment and with the additional computer power the robot can autonomously navigate a complex environment. Obstacle detection and avoidance are simple tasks for all ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
The Falco Pumped is a fixed VOC gas monitor that eliminates false readings found with other competing technology and continuously detection Volatile Organic Compounds (VOCs) in hazardous areas. The Falco pumped, fixed VOC gas monitor uses a sample line to draw samples and is ideal for use in difficult locations such as underground or in confined ...
-
Manufactured by Sensorex Oybased in FINLAND
Sensor type: Semiconductor. Detected gases: VOCs, solvents, alcohols. Input voltage: 17-28 VDC | 15-24 VAC. Output signal: 4-20mA. Operating temperature: -30? - +55?. Protection class: IP54. Dimensions Case: Case 124 x 86 x 73 mm. Weight: 0,6 ...
-
Manufactured by DOD Technologies Incbased in USA
Tiger is the most advanced hand held VOC detector on the market with the widest measurement range, accurately detecting gases down to the ultra low ppb levels up to 20,000 ppm. The internal gas table detects over 480 VOCs and toxic compounds. Its patented Fence Electrode Technology with three electrode format and Anti-contamination design ensures optimal performance within humid and difficult ...
-
Manufactured by Mölnbacka Industri AB (MIAB)based in SWEDEN
This system is suitable for relatively small air flows and small amounts of VOC. The process air passes through a filter containing activated carbon. The activated carbon is replaced when it becomes saturated with VOC. MIAB F is available in to versions, a stationary were carbon is exchanged on the site and one were the filter is transported to a reactivation ...
-
Manufactured by Global Detection Systems Corp. (GDS)based in USA
The GDS-48 Remote Sensor accepts catalytic bead combustible sensors, SmartIR infrared combustible sensors, and Photoionization VOC sensors and can be used to detect combustible gas, carbon dioxide and volatile organic compounds such as benzene or ...
-
Manufactured by IUT Technologies GmbHbased in GERMANY
The PID-Analyzer is a multi-gas analyzer as gas-chromatograph (GC) with a Photo Ionization Detector (PID) for the read-out able to identify compounds. It has a high sensitive detection and identification of Volatile Organic Compounds such as Benzene, Toluene, Ethyl benzene and Xylene (BTEX). The PID-Analyzer does not show any interference (quenching) from humidity and offers manual and automatic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you