Worker Monitoring Equipment For Health And Safety Available In Michigan
-
PremiumManufactured by ENVEAbased in FRANCE
Cairtub is an integrated system for the low concentration measurement of pollutants, compact and ready to use. Cairtub allow for easy deployment of autonomous measurement points virtually everywhere, inside and outside.Its low dimensions and its simplicity of installation allow for quick easy to realize field measurement ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
Increasing the performance of your entire fleet is achievable through the acquisition of the MDS-3S-33 Shred Truck from Shred-Tech®. This high-quality and high-powered shredding truck is engineered by our top experts to meet your specifications and surpass your expectations. Built with a 33,000 lb. GVW chassis with a legal payload of 14,000 lbs., this is a powerful beast of a machine that ...
-
Manufactured by Dega CZ s.r.o.based in CZECH REPUBLIC
The DEGA NSx-yL III gas transmitter – is a part of the detector that is placed in the monitored area that is designed to protect the health and property of people in a location in which a critical situation could occur through an accumulation of flammable or toxic gases. The transmitter includes a sensor that ensures sensing of the ambient air with the subsequent transfer of any actual gas ...
-
Manufactured by Coseco Industrie Group Srlbased in ITALY
Single articulated shovel made up by a sliding trolley on which the packing shovel is hinged. All the movements are operated by hydraulic ...
-
Manufactured by IMICROQ, S.L.based in SPAIN
Coriolis µ Air Sampler is a portable microbial air sampler for indoor and outdoor air bio-contamination monitoring. The equipment concentrates airbone particules in a liquid sample that can be analyzed afterwards through microbiological techniques. The equipment has been developed by Bertin Technologies and can be used in cleanrooms as Hospitals & Healthcare, Pharmaceutical industries, ...
-
Manufactured by PureAire Monitoring Systems, Incbased in USA
The Air check Ex Toxic Gas Monitor is a compact gas monitoring system that’s ideal for continuously monitoring toxic and in hazardous areas. The Air check Ex non-intrusive calibration allows sensor calibration in hazardous areas without area declassification. The only tool required is a small magnetic wand, designed to be carried on a technician’s key chain. It also allows true ...
-
Manufactured by PureAire Monitoring Systems, Incbased in USA
The Air check Ex Combustible Gas Monitor is a compact gas monitoring system that’s ideal for continuously monitoring toxic and corrosive gases in hazardous areas. The Air check Ex non-intrusive calibration allows sensor calibration in hazardous areas without area declassification. The only tool required is a small magnetic wand, designed to be carried on a technician’s key chain. It ...
-
Manufactured by Coseco Industrie Group Srlbased in ITALY
It is performed by means of an expulsion plate which is located inside the body. The plate is operated by a double effect multi-stage hydraulic cylinder which also generates counter-pressure in the waste loading ...
-
Manufactured by American Gas & Chemical Co. Ltdbased in USA
Color Change is Shown in the Presence of Specific Toxic Gases. Easy to Use: Can be used by anyone. No hygienists or technicians required. Lightweight - reusable badge weighs 1/4 ounce. Badges and monitors are immediately ready for use. No activation required. Cumulative and one time exposure results are easily obtained and ...
-
Manufactured by Polimasterbased in LITHUANIA
Dosimeters perform monitoring and measurement of personal dose equivalent and personal dose equivalent rate in the wide energy range - from the natural background level up to 5-10 Sv/h (500-1000 R/h). Instruments are stable to dose up to 300 Sv, have two thresholds in DER and DE ranges, have non volatile memory for data storage. Hermetic, water-resistant and shockproof case and the ...
-
Manufactured by Dega CZ s.r.o.based in CZECH REPUBLIC
DEGA NB III transmitter is a part of the gas detection system. Transmitter is located in monitored premises in which critical situations due to accumulation of flammable or toxic substances can occur. Transmitter converts the measured concentration of substances into a unified signal 4 - 20mA and RS485. The transmitter can be connected to control panels DEGA UPA III, DEGA UKA III and DEGA UDA ...
-
Manufactured by Assay Technology, Incbased in USA
The 521 is our fastest sampling rate badge, which means it is our most sensitive badge with the lowest reporting limits. Use this badge for monitoring chemicals with a low PEL (10 ppm or less), STEL monitoring, or for indoor air quality situations. Organic Solvent Panel – This panel includes the most commonly requested chemicals on an organic vapor monitor. The set list allows us to ...
-
Manufactured by Advanced Chemical Sensors (ACS)based in USA
ACS Vapor Monitor can be worn as a badge near the breathing zone to measure personal exposure, or placed in a room to measure area ...
-
by Altezza LLPbased in KAZAKHSTAN
When it comes to choosing equipment to protect your worksite from hazardous gases, rely on the Radius® BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the ...
-
Manufactured by Coseco Industrie Group Srlbased in ITALY
Monolithic structure body divided in two separate chambers each with totally independent waste compaction groups made up by a single articulated hydraulic cylinders operated shovel hinged on a sliding trolley. The synchronized system movement generates a double pressure on the waste thus granting an high compaction ...
-
Manufactured by Industrial Scientificbased in USA
The TGX Gateway links you with remote teams through dual cellular and satellite connectivity, so you can monitor, escalate, and respond the moment a worker needs you. When lone workers encounter a safety hazard, they can’t rely on peers nearby to help. That’s why real-time monitoring is a lone worker’s best friend. The TGX Gateway links you with remote teams through dual ...
-
Manufactured by ESG Solutions - a Spectris Companybased in CANADA
For over 20 years, ESG has provided microseismic monitoring solutions to the international mining industry. Our microseismic monitoring systems have been deployed in hundreds of underground and open-pit mines around the world and we continue to invest in developing new and improved microseismic solutions for mining applications. ESG’s microseismic monitoring systems and services provide a ...
-
Manufactured by Advanced Chemical Sensors (ACS)based in USA
ACS Vapor Monitor can be worn as a badge near the breathing zone to measure personal exposure, or placed in a room to measure area ...
-
Manufactured by Agility Instruments, Inc.based in USA
The AeroLead® 2000 Wall-Mounted Analyzer automatically samples, extracts, and quantifies the concentration of total lead in air. Compliance with environmental and occupational health regulations can be easily determined, with sample results available in 7 minutes. The total sampling and analysis cost using the AeroLead® 2000 is less than 1% of typical off-site laboratory analysis costs alone, ...
-
Manufactured by Advanced Chemical Sensors (ACS)based in USA
ACS Vapor Monitor can be worn as a badge near the breathing zone to measure personal exposure, or placed in a room to measure area ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you