29 CFR Articles
-
Noise Maps
In the U.S., OSHA has set regulations on worker noise exposure. The specific regulations are 29 CFR 1910.95 for industry and 29 CFR 1926.52 for construction. The usual measurement method is to use a portable noise dosimeter attached to a worker that measures noise exposure as the person moves about the work area. However, this does nothing to identify the source and location of the noise. It also ...
-
Hexavalent Chromium Increases Workers’ Risk of Cancer
Where is Hexavalent Chromium Found? Hexavalent Chromium (also known as Chrome 6, Chrome VI, or hex chrome) is a component of a variety of metal products. It is most often found in stainless steel where it greatly reduces corrosion. Hex chrome is also found in some steel alloys because of its ability to increase flexibility and reduce corrosion. Electroplating of chrome also can form Hexavalent ...
-
Do I Need Active Fall Protection?
For many manufacturing and construction companies, figuring out when and where to use fall protection is critical both for employee safety and to safeguard against potential fines from regulatory bodies. There are two primary types of fall protection for on-the-job safety — active fall protection and passive fall protection. Let’s discuss when you should use active fall protection, ...
-
Beryllium Exposure to Workers – OSHA Proposes New Beryllium Standard
In August 2015, OSHA proposed a new rule to further control workers’ exposures to beryllium. The Beryllium Standard (29 CFR 1910.1024) went into effect on March 10, 2017. The exposure assessment provision went into effect on March 12, 2018. The change rooms and showers provisions go into effect on March 11, 2019 and the engineering controls requirement go into effect on March 10, 2020. Most ...
-
Stainless Steel Welders Exposed To Hexavalent Chromium – A Cancer Causing Substance
Hexavalent Chromium Cancer-Causing Substance Welding on stainless steel can expose welders to hexavalent chromium, also called Chrome 6, or Chrome (VI), which is a suspect cancer-causing substance now specifically regulated by OSHA (General Industry 29 CFR 1910.1026 and Construction 29 CFR 1926.1126). (Go to OSHA.gov/law-regs—the specific regulations are found under “General ...
-
Is Hexavalent Chromium (Hex Chrome; Chrome VI) Found in Welding Fumes A Carcinogen?
Neither the chromium found in metal plating (like chrome trim on a can) nor the chrome found in medicines like chromium picolinate is in the hexavalent form and is not carcinogenic. In fact it has a positive value in our system by assisting in regulating blood sugar levels. The chrome found in the fumes formed by welding stainless steel and released into a welder’s breathing zone is in the ...
-
How to deal with asbestos exposure in your workplace: advice for industrial workers
At one point, more than 75 different industries exposed workers to asbestos. Even though these industries have been made safer by regulations from the National Institute for Occupational Health and Safety, many workers still come in contact with asbestos products that remain at their jobsites. Although most industrial employees face some form of asbestos exposure risks during their career, ...
-
What’s the Best Option for Construction Fall Protection?
The importance of workplace safety is indisputable, particularly in the construction industry. Because of the vast array of options from which safety officers and other construction officials can choose fall prevention systems for their worksites, it is difficult to understand which system is ideal for a particular location. When choosing the perfect construction fall protection for your needs, ...
-
Hearing Loss for Workers is Preventable
Hearing Loss In The Workplace In the U.S., OSHA has set regulations on worker noise exposure. The usual sound measurements method is to use a noise dosimeter attached to a worker that measures noise exposure as the person moves about the work area. However, this does nothing to identify the source and location of the noise. It also does not address non-OSHA noise issues such as community noise, ...
-
Managing Temporary Worker Safety in the Construction Industry
In recent months OSHA and NIOSH have begun cracking down on organizations for their historically lax treatment of temporary workers in regard to safety. The reasoning for this increased attention, along with subsequent stiff fines is twofold. According to Dave Michaels, OSHA’s Assistant Secretary of Labor, there are 23% more temporary workers in the job market than there were before the ...
-
9 Things Your Respiratory Protection Program Must Include
Osha Respiratory Protection Standard The OSHA Respiratory Protection Standard 29 CFR 1910.134 has many requirements in addition to respirator fit testing. If respirators are worn by any employees, companies must have a written Respiratory Protection Program. The one exception is if the only respirators in use are those voluntarily worn by employees, then a written program is not required. But ...
-
5 Myths About Active Fall Protection
In our line of work, safety regulations are continually evolving. This means that employers face the challenge of staying in-the-know when fall safety regulations are implemented or updated. On top of OSHA regulation updates, there are also technological advances in both the construction industry itself and in active fall protection to understand. With so much information, it can be tough to stay ...
-
A Guide to Hazwoper Training Levels
Hazardous Waste Operations and Emergency Response (Hazwoper) is a crucial component in safeguarding the occupational safety of individuals involved in dealing with hazardous waste and emergency situations. With an array of roles and industries falling under the ambit of Hazwoper, it becomes essential to comprehend the various training levels associated with this vital safety program. In this ...
-
Beat the Heat: Occupational Exposure to Heat and Hot Environments
With summer underway, now is the perfect time for organizations to examine their policies and procedures regarding employee heat exposure, especially in light of the recently published document from NIOSH titled, “Occupational Exposure to Heat and Hot Environments”, Publication Number 2016-106. What is the Issue? Heat-related injuries and illnesses in the workplace are more common ...
-
Worker Exposure to Beryllium Health Hazards – New Regulations are HERE!
Beryllium Regulations To Lower Worker Exposure Recently OSHA has put new Beryllium Regulations in effect to lower worker exposure levels. Based on information on the health hazards of worker Beryllium exposure, OSHA has lowered the allowable exposure level by a factor of 10—from 2 ug/m3 to 0.2 ug/m3—and create a separate standard for Beryllium (29 CFR 1910.1024). There are a variety ...
-
What manufacturers need to know about complying with OSHA’s crystalline silica regulation
While crystalline silica is a rather common mineral found naturally and used in the production of a wide range of products — from glass to ceramics — respirable crystalline silica as a byproduct of manufacturing processes represents a significant potential health risk in the workplace. Of the nearly 2.3 million U.S. workers exposed to respirable crystalline silica, many work in ...
-
Rising OSHA Fines: Is Your Workplace Compliant with OSHA Fall Protection Code?
On January 23, 2019, OSHA put into effect new and increased fines for workplace safety violations. These new fines are up roughly 2.5% from OSHA’s 2015 revisions. While a 2.5% increase may not sound substantial, it turns what is already a hefty sum into something even more unfriendly to your bottom line. The best way to avoid being hit with expensive fines is to ensure your worksite is in ...
-
OSHA Bathroom Break Laws
In today’s fast-paced work environment, it’s not uncommon for employees to feel pressured to remain at their desks or workstations for extended periods. However, bathroom breaks are a basic necessity that shouldn’t be compromised. The Occupational Safety and Health Administration (OSHA) recognizes the importance of proper restroom access and has guidelines in place to protect ...
-
Roofing Injury & Fatality Prevention: Skylights and Open Roof Holes
Abstract: Falls through skylights continue to plague roofing construction, as injury and wrongful death cases rise. Roofing contractors are required per OSHA regulations and the standards of care to protect workers. Skylights must be shielded with covers, screens, or protective barriers before commencing work. Unprotected roof-holes, windows, or skylights may be overlooked until a worker ...
-
Hearing Protection PPE: Beyond the Basics
Hearing loss is one of many safety issues that permeate almost every workplace but is seldom discussed in the open. The Centers for Disease Control and Prevention (CDC)estimates that roughly 22 million Americans are exposed to hazardous noise levels at work. Additionally, the Hearing Loss Association of America estimates that of the 48 million Americans suffering from some degree of hearing loss, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you