Absorption Monitoring Equipment For Monitoring And Testing Near Newfoundland
-
Manufactured by ZebraSci Inc.based in USA
HSA or Headspace Analysis, is a deterministic, non-destructive leak detection method to evaluate vials, syringes, cartridges and other parenteral products. Oxygen concentration/partial pressure, carbon dioxide concentration/partial pressure, or total pressure conditions inside a container can be measured over time. When sample testing is performed over time, a quantitative measure of a container ...
-
Manufactured by QED Environmental Systemsbased in USA
With patented LASER technology, the SEM5000 Portable Methane Detector is the ideal instrument for surface emissions monitoring, reporting and detecting potential leaks at wellheads and surface penetrations. The SEM5000 is selective, specifically to methane and is able to detect methane emissions from 0.5 ppm to 100% ...
-
Manufactured by Shimadzu Scientific Instruments Incbased in USA
The monitored single-beam UV-1280 is equipped with seven measurement modes, features USB data portability, and offers wavelength scanning from 190 to 1,100 nm. Combining these features with intuitive operation improves work efficiency, making the compact UV-1280 the ideal choice for applications in a variety of ...
-
Manufactured by SensoTech GmbHbased in GERMANY
The LiquiSonic® Online Bath Monitor is a high sophisticated liquid analyzer that is based on modern technologies and a comfortable operation. Measuring precisely the temperature-compensated sonic velocity directly in the bath or pipe, the analyzer determines continuously and in real time the concentration and contamination degree in cleaning or surface treatment ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
System 400CS is a cost-effective, high-performance monitoring package, designed for power plants and waste to energy plants. The measurements are based on the FTIR (Fourier Transform Infrared Spectroscopy) and/or DOAS technique (Differential Optical Absorption Spectroscopy), allowing continuous monitoring of several compounds. ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Everything from precise measurement to reduced running costs. HORIBA-leading the world in practical environmental analysis technology will give a benefit for Total Nitrogen/Phosphorus monitoring. Total nitrogen, total phosphorus. To measure these two new targets in the 5th of Total Water Contaminants Regulation enforced in Dec. 2001 in Japan, the TPTN-300 offers the ultraviolet oxidation ...
-
Manufactured by RKI Instruments, Inc.based in USA
The RI-215 series of IR CO2 montitors are widely used in the measurement and control of CO2 levels in a variety of applications where CO2 monitoring or detection is required. A highly accurate, RKI non-dispersive infrared absorption sensor is used to provide direct measurements through diffusion or sample draw monitors, and activate alarms or control ventilation systems based on preset CO2 ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
The REF500 (120/240V, 50Hz) and REF600 (120/240V, 60Hz) Reference Sound Sources are an excellent tool for providing accurate and repeatable reference sound levels. These sources offer extremely flat response over a broad frequency range and are ideal for use in such applications as sound power, sound absorption, and sound insulation measurements. The REF500/600 can be used for qualification tests ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
OCMA-550 to measure residual oil on components and concentrations of oil adhered on solids such as soil. Measurement can be easily made only by injecting the extracted water sample into the attached cell and setting it to the equipment. This model features a simple design which allows opening/closing of the door to setting of cell with just one hand. This is best for measurement of extracted ...
-
Manufactured by Ohio Lumexbased in USA
Used as an attachment to RA-915M (or RA-915+) the new PYRO-915+ atomizer with a large optical sell with heated windows and two chambers provides a unique direct mercury determination and allows direct analysis of complex matrix samples of solids and liquids (no pretreatment procedures ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
Using gas filter correlation technology, the Model 48i measures the amount of carbon monoxide in the air. The Model 48i is based on the principle that carbon monoxide (CO) absorbs infrared radiation at a wavelength of 4.6 microns. Because infrared absorption is a nonlinear measurement technique, it is necessary for the instrument electronics to transform the basic analyzer signal into a linear ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
Using gas filter correlation technology, the Model 48i-TLE measures the amount of carbon monoxide in the air. The Model 48i-TLE is based on the principle that carbon monoxide (CO) absorbs infrared radiation at a wavelength of 4.6 microns. Because infrared absorption is a nonlinear measurement technique, it is necessary for the instrument electronics to transform the basic analyzer signal into the ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
Using gas filter correlation technology, the Model 48i-HL measures the amount of carbon monoxide in the sample. The Model 48i-HL is based on the principle that carbon monoxide (CO) absorbs infrared radiation at a wavelength of 4.6 microns. Because infrared absorption is a nonlinear measurement technique, it is necessary for the instrument electronics to transform the basic analyzer signal into a ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The ScanDrop2 is a versatile, robust instrument that is user friendly without sacrificing measurement reliability. Optimized for the UV/Vis range, its symmetrical Czerny-Turner design with a linear CCD detector ensures excellent stability and reproducible results while offering a high level of resolution (Toluoene-hexane: A@269 / A@269). Its long-lasting xenon flash lamp, which, unlike other ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
RA-915M Mercury Analyzer with pyrolyzer PYRO-915+ (with large optical length of analytical cell and heated windows of the analytical cell is developed for unique direct mercury determination (no pretreatment procedures required) in complex organic samples at the level of few ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Atomic absorption spectrometry at 254 nm with Zeeman correction for background absorption for interference-free ...
-
Manufactured by B&W Tekbased in USA
i-Spec™ series products are broadband transmission/reflection/absorption spectrophotometers with various accessory options for bench-top and/or portable ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s Impac IPE 140/45 pyrometer features a specialized CO2 absorption band to accurately measure hot CO2 ...
-
Manufactured by Crystal IS - an Asahi Kasei companybased in USA
Optan Surface Mount Series UVC LEDs 235 nm, 255 nm, and 275 nm wavelengths. Optan Surface Mount (SM) UVC LEDs emit ultraviolet light in a relatively narrow wavelength range and are often used in higher volume sensor applications in air, water, and surface applications. ...
-
Manufactured by Norsonic ASbased in NORWAY
Our aim is to take the latest technology available to help our customers complete their measurements faster but without loss of precision. The Nor280 power amplifier is the 4th generation of specially designed units for building acoustic measurements from ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you