Seismic Accelerometer (Accelerometers) Equipment Available In Africa
-
Manufactured by Teknik Destek Grubu (TDG)based in TURKEY
These accelerometers are ultra low noise sensors which are based on force balance / electro-dynamic feedback technology, ±0,8g measurement capacity and named as SENSEBOX7021/22/23+ and 7031/32/33 depending on the number of axis included. This series is an ideal solution for Seismic Strong Ground Motion Monitoring, Ambient ...
-
Manufactured by Reftek Systems Inc.based in CANADA
The SMHR2 combines Reftek's latest generation of universal broadband seismic recorder, with the advanced high resolution, force-balance accelerometer, model 147. Designed to facilitate installation, security and maintenance in a single, secure enclosure optimized for early warning system ...
-
Manufactured by Reftek Systems Inc.based in CANADA
The SMA2 combines Reftek's latest generation of universal broadband seismic recorders, with the advanced high-resolution, capacitive accelerometer, model 131D. Designed to facilitate installation, security and maintenance in a single, secure enclosure optimized for structural monitoring ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
Single component accelerometer sensor for structural and environmental seismic monitoring, accuracy of 1 V/g, housed in an aluminum IP-67 protection rate case with embedded fixing flaps; ideal for installation in hard environments, it is supplied with IP-67 12 male Amphenol connector with protective cap and orange polish PUR cable. ...
-
Manufactured by ISTI - Instrumental Software Technologies, Inc.based in USA
The SM550 and SM1500 (Fig. 4 - 6) are two MEMS type, three-component acceleration sensors. Both have wide frequency response. The SM1500 model provides response from DC to 750 Hz, while the SM550 model provides response from DC to 50 Hz. Many output ranges are available for both models: +/-2 g, +/-4 g, +/-5 g, +/-6 g, +/-10 g, +/-12 g. Default sensitivity is 2.4 V/g for the SM1500, and 1.2 V/g ...
-
Manufactured by Metrix Instrument Co.,based in USA
General purpose accelerometer that meets API 670 requirements. Designed for use on a wide variety of machine types with its broad frequency response of 0.5 to 10 kHz (+/- 3dB), 50g range, and mounted resonance of 13 kHz. A built-in amplifier provides an industry-standard 100mV/g low-impedance, constant-current output that is ...
-
Manufactured by Geobit Instrumentsbased in GREECE
The SM550 and SM1500 are two MEMS type, three-component acceleration sensors. Both have wide frequency response. The SM1500 model provides response from DC to 750Hz, while the SM550 model provides response DC to 50Hz. Many output rages are available for both models like +/-2g, +/-4g, +/-5g, +/-6g, +/-10g, +/-12g, are. Default sensitivity is 2.4V/g for the SM1500, and 1.2V/g for the ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
Single component accelerometer sensor for structural and environmental seismic monitoring, accuracy of 100 mV/g, housed in an aluminum IP-67 protection rate case with embedded fixing flaps; ideal for installation in hard environments, it is supplied with IP-67 12 male Amphenol connector with protective cap and orange polish PUR cable. ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
3 components accelerometer sensor for structural and environmental seismic monitoring, accuracy of 100 mV/g, housed in an aluminum IP-67 protection rate case with embedded fixing flaps; ideal for installation in hard environments, it is supplied with IP-67 12 male Amphenol connector with protective cap and orange polish PUR cable. ...
-
Manufactured by M.A.E. Advanced Geophysics Instrumentsbased in ITALY
3 components accelerometer sensor for structural and environmental seismic monitoring, accuracy of 1 V/g, housed in an aluminum IP-67 protection rate case with embedded fixing flaps; ideal for installation in hard environments, it is supplied with IP-67 12 male Amphenol connector with protective cap and orange polish PUR cable. Aluminum ...
-
Distributed by Geomatrix Earth Science Ltdbased in UNITED KINGDOM
The 131B-01 Accelerometer uses a Micro-Electro-Mechanical System (MEMS) variable capacitance displacement sensor. Because no coils or magnets are used, the accelerometer is inherently stable over temperature, with excellent reliability, linearity, hysteresis, and noise levels. The 131B-01/3 Tri-axial Accelerometer is best suited to ...
-
Manufactured by ESG Solutions - a Spectris Companybased in CANADA
ESG offers complete microseismic monitoring solutions for a variety of geotechnical applications including underground storage facilities (LPG sites and nuclear waste repositories), vibration thresholds and blasting and monitoring of structures such as dams, high speed rail tracks, bridges and tunnels. Our underground storage systems incorporate microseismic, temperature and pressure data into ...
-
Manufactured by Geobit Instrumentsbased in GREECE
GEObit provides a flexible, real time, immediate warning structural monitoring solution. We combine our SRi32S deigitizers/ recorders and a very powerful processing unit for providing real time structural motoring & alert ...
-
Manufactured by Asian Contec Ltd.based in INDIA
The Dymas 24 Alben is a multichannel acquisition system suitable for long term monitoring for stable configuration inside dams and structures. The system setup ranges from 6, 12 up to 48 channels in multiples of 6 (with or without communication modules) positioned in a single metallic cabinet provided for wall or floor fixing. Dymas 24 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you