Sentry Environmental Industry Equipment
-
Manufactured by Sentry Equipment Corpbased in USA
The Sentry FLR sample cooler cools a sample from process streams. That may seem simple, but each FLR is a uniquely designed small tube in a shell heat exchanger. The sample to be cooled flows through the tube side of the cooler, and the cooling fluid, usually water, flows through the shell side. The cooled sample then can be taken to a laboratory for analysis or piped to in-line process ...
-
Manufactured by Enercorp Instruments ltdbased in CANADA
The SENTRY 250 solid core current switch is self powered with a solid state AC/ DC switch and smart LED. The casing of the current sensor is solid and wiring must be fed through the sensing aperture. ...
-
Manufactured by Island Water Technologies Inc. (IWT)based in CANADA
Sentry is a unique bio-electrode sensor technology that provides real-time microbial performance monitoring in anaerobic and aerobic wastewater treatment systems. Toxic shock, system imbalance and poor performance result in regulatory fines and reduced revenue from biogas production. Globally there are over 100,000 installed advanced wastewater treatment facilities and industrial anaerobic ...
-
Manufactured by N-Con Systems Company, Inc.based in USA
The Sentry was designed be flexible. It can be used as a portable or fixed location, wastewater sampler. Composite may be collected simple time or flow proportioned by connecting it to a suitable flow measurement system. or simple composite sample. The addition of an ice chest or refrigerator to preserve the composite sample, gives you a low cost sampling system. Its no-nonsense design means ...
-
Manufactured by Sentry Equipment Corpbased in USA
Serving up to 32 sample streams between up to 8 analyzers, our sequencer ensures that you are maximizing uptime and decreasing reagent costs with accurate values. Individually programmable times and custom sequences allow each sequencer to be customized to your unique ...
-
Manufactured by Sierra Monitor - Mine Safety Appliances Co (MSA)based in USA
Sierra Monitor's Sentry IT 32 Channel Controller is a powerful network-enabled hazardous gas detection system controller that can operate up to 32 detectors and interface with devices over Modbus RTU, analog 4-20 mA, Sentry PSG Bus, and conventional dry contact. As part of the Sentry IT line, the Sentry IT Controller is compatible with the Classic Sentry, Sentry IT detectors, such as the ...
-
Manufactured by Sentry Technologiesbased in USA
The Sentry Watchdog alarm system monitors 4 device setpoints and calls out alarm conditions by one-way satellite communication. Regardless of location, Watchdog can send an alarm notification via text, automated voice call or email. This is a perfect alarm system for dry contact sensors such as a Murphy switch ...
-
Manufactured by Sentry Equipment Corpbased in USA
Simplify your sampling process with straightforward automation. The Sentry Pro-Tec controller is a streamlined controller that allows for automated sample control. Utilizing a few simple connections, operators can switch between obtaining a single grab sample, continuous sampling, or remote start from plant ...
-
Manufactured by Securisyn Medicalbased in USA
In collaboration with the Mayo Clinic and the United States Air Force, we're creating an entirely new system to care for chest wounds in the field. It includes a chest seal to treat sucking chest wounds and an innovative chest tube securement system to give our warfighters the best care ...
-
Manufactured by Sentry Equipment Corpbased in USA
The Sentry FSR tube sample cooler cools a sample from a process stream. That may seem simple, but each FSR is a uniquely designed small tube in a shell heat exchanger. The sample to be cooled flows through the tube side of the cooler, and the cooling fluid, usually water, flows through the shell side. The cooled sample then can be taken to a laboratory for analysis or piped to in-line process ...
-
Manufactured by Sentry Equipment Corpbased in USA
Sentry's CWIS Cooling Water Isolation Skid helps control the negative consequences associated with water and temperature inconsistency. By recirculating clean water behind a plate and frame heat exchanger, the CWIS protects your sample coolers from plant service water and ensures scaling/fouling is eliminated. The cooling water isolation skid moves beyond protecting coolers by maintaining a ...
-
Manufactured by Sentry Equipment Corpbased in USA
Designed to sample homogenous material, the PR sampler moves a sample tube into the process stream, capturing a representative sample without disruption. Successfully capture samples from your pressurized processes with the PR ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you