Acid Gas Monitoring Equipment For Monitoring And Testing Available In Singapore
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Acid Gas Scrubber neutralizes inorganic acids that often exist in a process exhaust stream or are created during the oxidation of air pollutants. The module can effectively scrub a variety of acids including Hydrogen Chloride (HCl), Hydrogen Bromide (HBr), Hydrogen Fluoride (HF) and Sulfur Dioxide ...
-
PremiumManufactured by Jacobi Groupbased in SWEDEN
Our series of specialty impregnated activated carbons for vapour applications such as acid gases, basic gases, formaldehyde, mercury, and odour control. Included within the AddSorb range are our industry leading grades for personal protection ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Adapted from our 931/932 ultraviolet (UV) analyzer platform, the 934 sensor-specific analyzer measures hydrogen (H2) in tail gas treating unit (TGTU) applications when hydrogen sulfide (H2S) measurements are not needed. With a rugged, low-maintenance design and minimal calibration drift, the analyzer uses a thermal conductivity detector (TCD) to deliver accurate H2 measurements while requiring ...
-
Manufactured by Dürr Systems, Inc.based in USA
Dürr provides a variety of Sorpt.X SW wet scrubbers including spray tower, tray tower and packed tower designs for industrial acid gas emissions ...
-
Manufactured by Pure Air Filtration, LLCbased in USA
This adsorbent media is a 50/25/25 percent blend of PureAir 8 potassium permanganate-based media, Sulphasorb 2™ acid gas removal media, and PureAir AC-X extruded activated carbon media designed for the broadest range removal of corrosive, odorous, or toxic gases. TriBlend meets the requirements for UL ...
-
Manufactured by Topsoe A/Sbased in DENMARK
CKA-3 is a promoted alumina-based catalyst used for hydrolysis of carbonyl sulfide (COS). The CKA-3 catalyst has a high activity even at low temperatures, which is essential for maximum conversion of COS, as the chemical equilibrium is favorable at low temperature. Whether the end product is chemicals or power, hydrolysis of carbonyl sulfide can be used in some gasification based plants to ...
-
Manufactured by Ozone Robot Environmental Equipment Ltd.based in UNITED KINGDOM
The ion exchange-integrated device can produce simultaneous desulfurization and denitrification of flue ...
-
Manufactured by Keppel Seghers Pte Ltdbased in SINGAPORE
Our dry scrubbing system is a highly flexible system for the removal of acid components, metals and dioxins from flue gases, resulting in very low emissions. The acid gas components are removed by neutralisation with hydrated lime – or an equivalent reagent – and simultaneously, the heavy metals and polyaromatic compounds are absorbed by activated carbon or (activated) lignite. The ...
-
by AirDep Srlbased in ITALY
EQUIPMENT TYPE: Wet air, or other gases, depollution. APPLICATION: Wet air, or other gases, depollution. OPERATING PRINCIPLE: Packed towers are gas absorption devices that utilize an internal media of a variety of types to enhance the mass transfer of gases into an absorbing liquid. This scrubber design series can achieve high removal efficiencies on most gaseous contaminants with energy saving ...
-
Manufactured by Gradko International Ltdbased in UNITED KINGDOM
This tube can simultaneously measure a range of acid gases – Hydrogen fluoride, Hydrogen chloride, Nitric acid, Hydrogen bromide, Phosphoric acid and Sulphuric acid (HF, HCl, HNO3, HBr, HPO4 and ...
-
Manufactured by Pure Air Filtration, LLCbased in USA
This adsorbent media is a 50 percent/50 percent blend of PureAir 8 potassium permanganate based media and Sulphasorb 2; acid gas removal media designed for the removal of corrosive gases commonly found in the Pulp and Paper and Petrochemical/Refinery ...
-
Manufactured by Caldo Consultantsbased in UNITED KINGDOM
Regulated Emissions to Atmosphere; Waste gases are often hot and, if they contain fume or dust, Caldo hot gas filters can be used to remove these solids before the gases are released to atmosphere. However, such gases often also contain other pollutants; hot gas filtration can be combined with other techniques to ensure that all of the controlled substances stay within regulatory ...
-
Manufactured by China Xicheng EP Ltdbased in CHINA
Acid Gas Removal Process Acid waste gas treatment refers to the use of various technical measures to reduce the amount of acidic solvents or exhaust gas purification to eliminate acidic waste gas pollution. Acidic waste gas pollution sources are widely distributed. In order to prevent pollution, in addition to reducing the amount of acidic solvents to reduce the generation of acidic waste gas ...
-
Manufactured by Bionomic Industries Incbased in USA
The patented RotaBed® Fluidized Bed Scrubber represents a major breakthrough in ultra-high efficiency gas absorption and particulate collection in a space saving non fouling design. RotaBed is the ideal technology for applications involving particulate laden gas streams or when handling high solids content or scale forming scrubbing ...
-
Manufactured by AirPolbased in USA
Venturi scrubbers use high-energy impaction of liquid droplets to remove particulate from contaminated air streams. Water or other liquors are directed towards a constriction, or “throat,” where the atomized liquid scrubs the particulate from the air and transfers it to the scrubber liquid droplets. This type of technology is a part of the group of air pollution controls referred to ...
-
Manufactured by Lhoist Groupbased in BELGIUM
Sorbacal® SP is an enhanced hydrated lime especially designed for DSI applications. Its specific surface area of typically 40 m2/g (BET) is two times higher than standard hydrated lime, and its porous volume is typically 0.20 cm³/g (BJH), compared to 0.08 cm³/g for standard hydrated lime. These qualities make the material significantly more effective for acid gas removal than ...
-
Manufactured by Kasravand Co.based in IRAN
KASRAVAND offers a range of solutions to remove acid gas components (CO2 and/or H2S) from natural gas customized to meet each client’s specific process requirements. The most common methods for acid gas removal are via amines, physical solvents, or membranes, the choice of which depends on the levels of impurities to be removed. KASRAVAND works with major solvent suppliers such as Ineos, ...
-
Manufactured by SOLVAir by Solvay S.A.based in USA
SOLVAir® S300 and SOLVAir®S350 reduce acid gas stack emissions in highly contaminated flue gases in many industries, from power generation to waste incinerators, metallurgy, cement production and industrial ...
-
Manufactured by Tarmac International, Inc.based in USA
Acid Gas Scrubber: Portable Acid Gas Scrubber With Inlet Quench To Reduce Oxidizer Exhanst Gas Before Acid ...
-
Manufactured by Sep-Pro Systems, Inc.based in USA
Acid Gas Removal systems involve removal of inert gasses such as carbon dioxide, hydrogen sulfide, and nitrogen from unprocessed natural gas. These must be removed prior to use or sale of the natural gas to meet standards of less than 4% inert gases. Acid gases such as carbon dioxide (CO2) and hydrogen sulfide (H2S) are corrosive when water molecules are present and represent the major source of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you