Acid Gas Monitoring Equipment For Monitoring And Testing Near Marshall Islands
-
Manufactured by Dürr Systems, Inc.based in USA
Dürr provides a variety of Sorpt.X SW wet scrubbers including spray tower, tray tower and packed tower designs for industrial acid gas emissions ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Adapted from our 931/932 ultraviolet (UV) analyzer platform, the 934 sensor-specific analyzer measures hydrogen (H2) in tail gas treating unit (TGTU) applications when hydrogen sulfide (H2S) measurements are not needed. With a rugged, low-maintenance design and minimal calibration drift, the analyzer uses a thermal conductivity detector (TCD) to deliver accurate H2 measurements while requiring ...
-
PremiumManufactured by Jacobi Groupbased in SWEDEN
Our series of specialty impregnated activated carbons for vapour applications such as acid gases, basic gases, formaldehyde, mercury, and odour control. Included within the AddSorb range are our industry leading grades for personal protection ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Acid Gas Scrubber neutralizes inorganic acids that often exist in a process exhaust stream or are created during the oxidation of air pollutants. The module can effectively scrub a variety of acids including Hydrogen Chloride (HCl), Hydrogen Bromide (HBr), Hydrogen Fluoride (HF) and Sulfur Dioxide ...
-
PremiumManufactured by Samyang Corporationbased in SOUTH KOREA
TRILITE dry resin is used in gas-phase chemical filters designed to remove specific ions from the ...
-
Manufactured by Global Standard Technology Co., Ltd. (GST)based in SOUTH KOREA
Packed bed wet scrubbing stage. Fog nozzle wetting stage. Electric precipitator. Precipitator auto rinse. Purge blower for E/P system high voltage contact insulation enclosure. Diaphragm pump drain standard / gravity drain option. 5 HP induction fan ...
-
Manufactured by China Tianying Inc.based in CHINA
We has complied with the international advanced standard of EU 2000 Emission. Import, absorb, digest the foreign advanced flue gas treatment process, successfully developed ”SNCR+ Rotary Atomizing Semi-dry+ Dry+ Active Carbon+Bag Precipitator” combined process, and manufactured 250 TPD to 600 TPD waste incineration furnace matched with flue gas acid removal, Denitration Reactor ...
-
Manufactured by Keppel Seghers Pte Ltdbased in SINGAPORE
Our dry scrubbing system is a highly flexible system for the removal of acid components, metals and dioxins from flue gases, resulting in very low emissions. The acid gas components are removed by neutralisation with hydrated lime – or an equivalent reagent – and simultaneously, the heavy metals and polyaromatic compounds are absorbed by activated carbon or (activated) lignite. The ...
-
Manufactured by China Xicheng EP Ltdbased in CHINA
Acid Gas Removal Process Acid waste gas treatment refers to the use of various technical measures to reduce the amount of acidic solvents or exhaust gas purification to eliminate acidic waste gas pollution. Acidic waste gas pollution sources are widely distributed. In order to prevent pollution, in addition to reducing the amount of acidic solvents to reduce the generation of acidic waste gas ...
-
Manufactured by Addfield Environmental Systems Limitedbased in UNITED KINGDOM
The Addfield wet scrubber system is primarily designed as particle suppressant system, ideally suited to high capacity incineration machines. Heavy particulates are removed from the exhaust gas using water injected from the roof of the scrubber system. This bolt on system can be added to any incineration machine in the Addfield range and is scaled according to the specific application. ...
-
Manufactured by Lhoist Groupbased in BELGIUM
Sorbacal® SP is an enhanced hydrated lime especially designed for DSI applications. Its specific surface area of typically 40 m2/g (BET) is two times higher than standard hydrated lime, and its porous volume is typically 0.20 cm³/g (BJH), compared to 0.08 cm³/g for standard hydrated lime. These qualities make the material significantly more effective for acid gas removal than ...
-
Manufactured by Energy Recovery Incbased in USA
The IsoGen system captures pressure energy and generates electricity from high-pressure fluid ...
-
Manufactured by Energy Recovery Incbased in USA
IsoBoost is a hydraulic pumping system that saves energy in gas processing (during acid gas removal) and ammonia production (during CO2 removal). Plants recovery up to 80% of otherwise wasted pressure ...
-
Manufactured by SOLVAir by Solvay S.A.based in USA
SOLVAir® S300 and SOLVAir®S350 reduce acid gas stack emissions in highly contaminated flue gases in many industries, from power generation to waste incinerators, metallurgy, cement production and industrial ...
-
Manufactured by Envitech, Inc.based in USA
Envitech’s wet electrostatic precipitator (WESP) uses electrostatic forces to remove particulate. It is used to treat gas streams with sub-micron particulate, aerosols, or fumes. These can include heavy metals such as lead, arsenic, or cadmium, condensed acid aerosols like sulfur trioxide (SO3), or condensed volatile organic compounds (VOC’s). The use of electrostatic forces ...
-
Manufactured by Sierra Environmental Technologies, LLCbased in USA
GC IPH is a bituminous coal-based activated carbon that is specially impregnated for the desulphurization of gases and the removal of all acidic contaminants such as hydrogen sulfide, hydrogen chloride, and mercaptans. It is also available in a variety of mesh sizes as well as in a coconut shell ...
-
Manufactured by Sierra Environmental Technologies, LLCbased in USA
A granular activated carbon manufactured from high quality lignite coal specifically for odor control applications. The virgin activated carbon achieves its high H2S capacity due to its naturally inherent composition and the optimized activation that maximizes the desired porosity of the activated ...
-
Manufactured by Sierra Environmental Technologies, LLCbased in USA
SweetAir-H2S is a unique, organic-based solid media composed of a mixture of inorganic odor reactants. This non-hazardous product is made of 99% natural and re-cycled products to help protect our environment while providing the best odor control available. Hydrogen sulfide is safely and irreversibly reacted away by special iron oxide compounds (this is not rust-impregnated wood chips). This media ...
-
Manufactured by Engineered Composite Systems (ECS)based in USA
AddSorb SF is an activated carbon with moderate adsorption capacity for Hydrogen Sulfide and other volatile organic compounds. The carbon is a pelletized media produced to treat foul air from wastewater and sewage treatment ...
-
Manufactured by Engineered Composite Systems (ECS)based in USA
PP Polishing Media is a potassium permanganate impregnated media produced to treat foul air from wastewater and sewage treatment processes. The carbon is a pelletized media using zeolite as a base material. PP Polishing Media excels at oxidizing acid gases, fumes, and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you