Acoustic Monitoring Applications available in West Virginia
-
Premium
Monitoring Storm Water
Accurate Measurement of Storm Water Precipitation utilizing Optical Scintillation Technology. Widely used by NOAA / NWS, military, airports, state DOTs, etc. APG-815 instantaneous rain & Snow liquid water equivalent and accumulation as well as precipitation ID 10 NWS / WMO codes.OWI-430 OWI-430 Present Weather and Visibility sensor reports over 60 NWS and WMO codes. Measurement of instantaneous rain rate; Instant notification of precipitation. No lag period Discriminates between rain, snow, drizzle, freezing ...
By Optical Scientific Inc. (OSi) based in Gaithersburg, MARYLAND (USA).
-
Premium
Dewatering and thickening of municipal sewage sludge
Dewatering and Thickening of Municipal Sewage Sludge using the Decanter. Flottweg has more than 50 years of experience in dewatering and thickening sewage slurry. We know the special requirements of sewage treatment plants and the water industry. As a result, we have developed a special decanter series especially for sewage treatment plants: the Flottweg C series. ...
By Flottweg SE based in Vilsbiburg, GERMANY.
-
Scientific instrumentation solutions for emulsions and microemulsions sector
Acoustics makes possible measurement of Particle size of the emulsion and microemulsion droplets with no dilution, which is critical for these systems. Papers presented below indicate very good agreement between this method and independent data. Combination of Acoustics and Electroacoustics could reveal peculiar mechanisms controlling emulsion stability, such as ion exchange in water-in-oil ...
By Dispersion Technology Inc. based in Bedford Hills, NEW YORK (USA).
-
Leak detection solutions for asset and risk management sector
Managing pipeline risk, why it is a critical part of any utility strategy. What's the worst case scenario? A burst trunk main causes catastrophic damage to homes and businesses, traffic disruption, and a significant interruption to the water supply, not to mention a severe dent in customer confidence. Water infrastructure is aging, and water companies continually need to look for ways to increase pipeline resilience and customer satisfaction whilst keeping bills low. Retaining the integrity of critical assets is ...
By Syrinix Ltd based in Hethel, UNITED KINGDOM.
-
Noise testing equipment for construction noise monitoring
The construction sector and its wide range of associated activities are very varied and from a noise monitoring perspective offer many unique challenges. However, Pulsar Instruments have a solution; a construction Pulsar noise meter with the ability to effectively assess the following two key categories: (1) Noise at Work (potential for noise-induced hearing loss due to long term exposure to noisy activities) (2) Environmental Noise (the potential to cause annoyance to surrounding areas or buildings during site ...
By Pulsar Instruments Plc based in Hunmanby, UNITED KINGDOM.
-
Wind farm noise monitoring
Wind energy is a renewable energy source that is being harnessed globally to reduce our dependence on fossil fuels and the associated impact on our environment. However, the environmental impact of the turbine noise and the blade pass noise is a concern that is carefully monitored and generally regulated. It is very important to be able to acquire accurate acoustical data for analysis, noise impact predictions, and regulatory compliance. Effective noise monitoring is a very valuable tool to manage a wind ...
By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).
-
Sound instrumentation for building acoustics
The field of building acoustics consists of two parts; Room Acoustics which deals with sound propagation in a room and Building Acoustics, which deals with sound propagation between rooms. Typically, room acoustics is related to the quality of sound, e.g. concert hall acoustics, while building acoustics is more related to unwanted sound, i.e. when you want to hear as little as possible of what is going on in adjacent rooms. From a measurement technology point of view, the two have a lot in common which shall be ...
By Norsonic AS based in Tranby, NORWAY.
-
Ultrasonic Clamp-on Sand Monitoring for the Oil and Gas Industry
Solids and sand production in oil and gas wells is a growing problem for oil and gas producers. The challenge is not only to avoid solids/sand production but to optimize well productivity, as even the smallest quantities of sand particles in the well flow can cause significant pipe or valve damage. Pulsar Measurement offers non-contacting acoustic pipe flow detection sensors that are designed to detect sand particles in the pipe. As well as non-contacting level measurement solutions that are designed to detect the ...
By Pulsar Measurement based in Birmingham, UNITED KINGDOM.
-
Industry Acoustics
Noise control in industrial halls is essential to ensure a non-harmful environment for the workers and limit the immissions caused at the neighbouring buildings. Check out how CadnaR enables you to model and calibrate your machines, calculate and evaluate noise at the workplaces and assess measures to acoustically improve any situation at ...
By DataKustik GmbH based in Gilching, GERMANY.
-
Longitudinal Rheology
Propagation of a longitudinal stress wave through a visco-elastic media creates dissipation of mechanical energy, similarly to a shear stress wave. The rate of dissipation depends on two parameters: bulk viscosity and longitudinal viscosity. For ...
By Dispersion Technology Inc. based in Bedford Hills, NEW YORK (USA).
-
Acoustic Theory
Acoustic theory for heterogeneous system should yield a relationship between some measured macroscopic acoustic properties, such as sound speed, attenuation, acoustic impedance, angular dependence of the scattered sound, etc., and some microscopic ...
By Dispersion Technology Inc. based in Bedford Hills, NEW YORK (USA).
-
Sensor Technology for Underwater Acoustics
Scanmatic has since its establishment in 1971 been a trusted partner and provider of high-tech solutions and systems within underwater acoustics, also denoted hydroacoustics. Hydroacoustics is the study and application of sound in water. For Scanmatic this is all about how to create innovative- and high-quality solutions for doing underwater recording, analysis, signal processing and transmission of underwater sound, as well as combinations of these. Most of these systems focuses on different ways to simulate the ...
By Volue AS based in Arendal, NORWAY.
-
Underwater technologies for offshore sector
Underwater operations on offshore structure are complex, often dangerous and always with high stakes. The waters are never forgiving and working in the ocean requires a tool that can withstand rough conditions and provide efficient solutions quickly. After years of research and exchange with major actors of the offshore world, Notilo Plus designed an innovative underwater system capable of undertaking the challenges encountered in this sector. Seasam Autonomous Drone™ is a compact and versatile solution, ...
By Notilo Plus based in Marseille, FRANCE.
-
Room Acoustics
"Good acoustics" is usually the target in room acoustics. The meaning of this depends on the type of room and the intended use. Rooms for musical presentations need a good sound quality at as many seats as possible while lecture halls demand good intelligibility of the teaching person. In case of open-space offices a productive working environment should be ensured. This can mean a focused individual work or a good communication between workers within the same team. CadnaR offers the tools to efficiently handle ...
By DataKustik GmbH based in Gilching, GERMANY.
-
Noise monitoring for wind farm monitoring
Wind farms must be developed in such a way that they become a part of the environmental lanscape. To this end, public authorities use standards and regulations to impose limits on the noise levels generated by such ...
By ACOEM GROUP based in Limonest, FRANCE.
-
Pulsar noise testing equipment for environmental noise monitoring
Environmental noise is a major issue in most countries, especially in areas of high population, and the sources of noise and their adverse effects on our well-being are varied. In terms of assessing the impact of these issues, we need to be able to make suitable noise measurements, or in some cases monitor the noise levels for longer ...
By Pulsar Instruments Plc based in Hunmanby, UNITED KINGDOM.
-
Particle Size Measurement
Particle size is a geometric characteristic that is usually assigned to material objects with sizes ranging from nanometers to millimeters. There is a wide variety of real systems that contain particles within this size range. These systems are generally polydisperse, meaning that the particles in a particular sample vary in size. Therefore, in order to adequately characterize such systems, it is not sufficient to simply determine a single particle size. We must instead determine the system’s particle size ...
By Dispersion Technology Inc. based in Bedford Hills, NEW YORK (USA).
-
Leak detection solutions for acoustic leak detection sector
Why acoustic monitoring for leak detection gives you confidence that your critical pipelines are in safe and assured ...
By Syrinix Ltd based in Hethel, UNITED KINGDOM.
-
Noise monitoring for industrial plant monitoring
Industrial sites are subject to regulations that limit sound and vibration levels at their perimeter and with regard to third parties. The taking of measurements at intervals remains one of the most frequently used methods of evaluating the noise and vibration levels of such ...
By ACOEM GROUP based in Limonest, FRANCE.
-
Ultrasonic instrumentation for solids flow and level monitoring applications
Solids flow and level monitoring refers to any application where solids and/or liquids need to be measured to record flow rate or detect potential blockages. PulsarGuard acoustically detects solids and clogs in the vacuum ...
By Pulsar Measurement based in Birmingham, UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you