Aerosol Monitoring Applications available in Estonia
-
Premium
Environmental data monitoring solutions for Research
Aerosol research is the study of the physical characteristics and behavior of an aerosol in a gas flow. ...
By Ecomesure based in Saclay, FRANCE.
-
Premium
Particle Measurement Instruments for Air Quality Monitoring
Every day, unhealthy air quality affects lives of millions of people all over the world. Numerous studies have shown correlation between particle concentration and adverse health effects especially for sensitive groups of people. Whereas regulated fine particle concentration values in air often focus only on PM10 and PM2.5, a more detailed determination of particle characteristics if often needed to fully understand the link between PM and their effect on human health. To determine the source of the particles in ...
By Dekati Ltd. based in Kangasala, FINLAND.
-
Premium
Particle Measurement Instruments for Engine Emissions
Engine emission measurements are typically made in very different environments and conditions depending on the purpose of the measurement. Standardized and regulated particle emission measurements are made in test cell environments, PTI stations and on board a moving vehicles according the details described in the regulations and standards. For various research purposes, engine emissions can be measured in different conditions and even pre-DPF conditions. The requirements for the measurement instrument in these ...
By Dekati Ltd. based in Kangasala, FINLAND.
-
Premium
Particle Measurement Instruments for Occupational Health and Industrial Hygiene
Dekati measurement solutions for occupational health and industrial hygiene include both portable and stationary PM measurement systems as well as solutions for overall industrial hygiene measurements according to ISO16000-34 and ISO16000-37. Our aerosol measurement solutions have been successfully used in various health and safety monitoring and research areas for over 25 years and today, our instruments are used globally by thousands of customers both in research and industry to measure different properties of ...
By Dekati Ltd. based in Kangasala, FINLAND.
-
Premium
Particle Measurement Instruments for Particle Filtration Research
Different types of filters such as fiber filters, membrane filters and fabric filters can be used to remove particles from air flow. The removal of the particles by the filter happens via different mechanism including interception, impaction, diffusion and electrostatic attraction. Typically, the effectiveness of the filter is described with a filtration efficiency value, which is the efficiency of the filter to remove particles from the air flow in percentage (0–100 %). The amount of removed particles by ...
By Dekati Ltd. based in Kangasala, FINLAND.
-
Aerosol and particle technology for filter testing industry
Nearly 100 test rigs for the quality assurance and the development of filters are being used worldwide with great ...
By Palas GmbH based in Karlsruhe, GERMANY.
-
Aerosol and particle technology for automotive industry
Especially in the field of automotive industry the application of modern particle measuring technology is essential in the domains of quality control and ...
By Palas GmbH based in Karlsruhe, GERMANY.
-
Aerosol Measurement Solutions for Aerosol Research
Whether you are studying ambient aerosol particles or synthetic nano particles, the scientific measurement devices of Airmodus will help you reach your research ...
By Airmodus Oy based in Helsinki, FINLAND.
-
Sunset Lab Performance Evaluation Samples
Sunset Lab Performance Evaluation Samples (PES) are quartz filters with carbonaceous aerosol deposits prepared under controlled laboratory conditions with analytical grade materials and methods. Integrating PES filters into QA/QC practices will provide carbonaceous aerosol instrument laboratories with a simple and precise tool for evaluating carbon analyzer performance and the validation of Organic, Elemental and Total Carbon (OCEC) ...
By Sunset Laboratory Inc. based in Tigard, OREGON (USA).
-
Aerosol Measurement Solutions for Ambient Monitoring
In urban environment the number of aerosol particles changes fast. The mass based measurements do not provide information about these fast temporal variations. Especially since most of the particles are ultrafine ones. Ultrafine particles might not contribute remarkably to the mass, but are important with respect to health ...
By Airmodus Oy based in Helsinki, FINLAND.
-
Laser based remote sensing instruments for remote visibility / fog applications
Aerosol LIDARs can provide visibility measurement, including Slant Visual Range (SVR - visibility up the glide slope), Runway Visual Range (RVR), and Vertical Optical Range (VOR - visibility at the decision point). LIDARs offer remote detection, augmenting current sensors wherever visibility is an issue, including for airports, ports, and oil platforms. Using the same principle, they are also capable of detecting incoming ...
By Raymetrics S.A. based in Athens, GREECE.
-
Particulate matter, halogens and aerosols
Example: Production of anodes for aluminium smelters as well as electronic industry (TFT-LCD). Similar tasks: Carbon and graphite industry, smelting of aluminium, coating of ...
By CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH based in Graz, AUSTRIA.
-
Aerosol and particle technology for aerosol generation industry
For more than 25 years Palas has been building systems for the aerosol generation. With more than 30 different systems Palas is market leader worldwide. In particular, the high reproducibility and constancy regarding the particle size distribution and concentration of the Palas aerosol generators have to be emphasized. The Palas aerosol generators are heatable in part up to 150°C. Several types are built in pressure-resistant version and being used successfully worldwide for applications in under and ...
By Palas GmbH based in Karlsruhe, GERMANY.
-
Aerosol Measurement Solutions for Vehicle Emissions
Use the Airmodus A23 Condensation Particle Counter to determine the number of aerosol particles following the requirements by the European regulations in vehicle emissions. The Airmodus products allow you to see even smaller particles; our CPCs can be tailored so that their detection limit is selected from 3nm up to 23nm! 3-5-7-10-15-23nm – just ...
By Airmodus Oy based in Helsinki, FINLAND.
-
Cloud and Aerosol Instrument for Climate models & radiative forcing industry
In 1996, the first Intergovernmental Panel on Climate Change (IPCC) issued a report that underscored how aerosols and clouds impact radiative fluxes and modulate climate. Their first report and all subsequent reports every seven years have emphasized how the level of scientific understanding (LOSU) remains low. This major gap in our understanding of how aerosols and clouds alter climate continues to drive the need for more widespread and accurate measurements, especially of black carbon (BC) aerosols that ...
By Droplet Measurement Technologies (DMT) based in Longmont, COLORADO (USA).
-
Cloud and Aerosol Instrument for visibility and fog industry
Diminished visibility is a major cause of traffic accidents on roadways and cancelled or significantly delayed flights at airports. The source of the deterioration in visibility is the presence of aerosol and cloud (fog) particles in sufficient concentrations to attenuate visible radiation. Mitigating the impact of limited visibility requires better understanding the optical properties of aerosols and fog and improved forecasting of such events in order for drivers to be forewarned and airports to better schedule ...
By Droplet Measurement Technologies (DMT) based in Longmont, COLORADO (USA).
-
Cloud and Aerosol Instrument for Bioaerosols research industry
Bioaerosols are everywhere in the atmosphere, and they have a significant impact on both the environment and human health – including allergies and the transmission of disease. Because bioaerosols can cause agricultural decline, they also have critical economic implications for our ...
By Droplet Measurement Technologies (DMT) based in Longmont, COLORADO (USA).
-
Remote Sensing Solutions for Climate Science
The growing concern for climatic change and the effects on ecosystems and societies increase the need for a better understanding of atmospheric phenomena. Clouds as well as natural and anthropogenic aerosols have considerable and complex interactions with the atmosphere and solar radiations. More and more scientists focus on analyzing these interactions and their effect on meteorology and the global warming. To better manage their impact, observers and decision makers need to monitor aerosol nature and ...
By Cimel Electronique based in Paris, FRANCE.
-
Cloud and Aerosol Instrument for Human health industry
Airborne particulate matter has been of environmental concern for decades. Yet nonbiological and biological particles can also significantly impact human health. On a global scale, it’s important to understand how aerosol particles affect air quality and in turn, human health and wellbeing. In fact, studies have found a correlation between daily mortality, daily hospitalization data, and particle concentrations in outdoor and indoor air. This research indicates that airborne particles can pose a global risk ...
By Droplet Measurement Technologies (DMT) based in Longmont, COLORADO (USA).
-
Remote Sensing Solutions for Satellite Calibration & Data Validation
Assessing the inherent uncertainties in satellite data products is a challenging task. The success or failure of any Earth Observation (EO) mission depends on the quality of its data. To achieve optimum levels of reliability, most sensors are calibrated pre-launch. However, the characteristics of the sensor may change during launch and when the satellite is on-orbit. Post-launch calibration is therefore essential for detecting any changes that occurred during launch and during the entire lifetime of the sensor ...
By Cimel Electronique based in Paris, FRANCE.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you