Aerosol Monitoring Applications in Asia & Middle East
-
Premium
Particle Measurement Instruments for Particle Filtration Research
Different types of filters such as fiber filters, membrane filters and fabric filters can be used to remove particles from air flow. The removal of the particles by the filter happens via different mechanism including interception, impaction, diffusion and electrostatic attraction. Typically, the effectiveness of the filter is described with a filtration efficiency value, which is the efficiency of the filter to remove particles from the air flow in percentage (0–100 %). The amount of removed particles by ...
By Dekati Ltd. Distributor in Dongcheng District, CHINA.
-
Premium
Particle Measurement Instruments for Engine Emissions
Engine emission measurements are typically made in very different environments and conditions depending on the purpose of the measurement. Standardized and regulated particle emission measurements are made in test cell environments, PTI stations and on board a moving vehicles according the details described in the regulations and standards. For various research purposes, engine emissions can be measured in different conditions and even pre-DPF conditions. The requirements for the measurement instrument in these ...
By Dekati Ltd. Distributor in Dongcheng District, CHINA.
-
Premium
Particle Measurement Instruments for Air Quality Monitoring
Every day, unhealthy air quality affects lives of millions of people all over the world. Numerous studies have shown correlation between particle concentration and adverse health effects especially for sensitive groups of people. Whereas regulated fine particle concentration values in air often focus only on PM10 and PM2.5, a more detailed determination of particle characteristics if often needed to fully understand the link between PM and their effect on human health. To determine the source of the particles in ...
By Dekati Ltd. Distributor in Dongcheng District, CHINA.
-
Premium
Environmental data monitoring solutions for Research
Aerosol research is the study of the physical characteristics and behavior of an aerosol in a gas flow. ...
By Ecomesure Distributor in New Delhi, INDIA.
-
Premium
Particle Measurement Instruments for Occupational Health and Industrial Hygiene
Dekati measurement solutions for occupational health and industrial hygiene include both portable and stationary PM measurement systems as well as solutions for overall industrial hygiene measurements according to ISO16000-34 and ISO16000-37. Our aerosol measurement solutions have been successfully used in various health and safety monitoring and research areas for over 25 years and today, our instruments are used globally by thousands of customers both in research and industry to measure different properties of ...
By Dekati Ltd. Distributor in Dongcheng District, CHINA.
-
Particulate matter, halogens and aerosols
Example: Production of anodes for aluminium smelters as well as electronic industry (TFT-LCD). Similar tasks: Carbon and graphite industry, smelting of aluminium, coating of ...
By CTP Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control GmbH Office in Shanghai, CHINA.
-
Aerosol and particle technology for aerosol generation industry
For more than 25 years Palas has been building systems for the aerosol generation. With more than 30 different systems Palas is market leader worldwide. In particular, the high reproducibility and constancy regarding the particle size distribution and concentration of the Palas aerosol generators have to be emphasized. The Palas aerosol generators are heatable in part up to 150°C. Several types are built in pressure-resistant version and being used successfully worldwide for applications in under and ...
By Palas GmbH Distributor in Bangalore, INDIA.
-
Aerosol Measurement Solutions for Vehicle Emissions
Use the Airmodus A23 Condensation Particle Counter to determine the number of aerosol particles following the requirements by the European regulations in vehicle emissions. The Airmodus products allow you to see even smaller particles; our CPCs can be tailored so that their detection limit is selected from 3nm up to 23nm! 3-5-7-10-15-23nm – just ...
By Airmodus Oy Distributor in Shanghai, CHINA.
-
Sunset Lab Performance Evaluation Samples
Sunset Lab Performance Evaluation Samples (PES) are quartz filters with carbonaceous aerosol deposits prepared under controlled laboratory conditions with analytical grade materials and methods. Integrating PES filters into QA/QC practices will provide carbonaceous aerosol instrument laboratories with a simple and precise tool for evaluating carbon analyzer performance and the validation of Organic, Elemental and Total Carbon (OCEC) ...
By Sunset Laboratory Inc. Distributor in Shijiazhuang City, CHINA.
-
Aerosol Measurement Solutions for Aerosol Research
Whether you are studying ambient aerosol particles or synthetic nano particles, the scientific measurement devices of Airmodus will help you reach your research ...
By Airmodus Oy Distributor in Shanghai, CHINA.
-
Aerosol and particle technology for filter testing industry
Nearly 100 test rigs for the quality assurance and the development of filters are being used worldwide with great ...
By Palas GmbH Distributor in Bangalore, INDIA.
-
Aerosol and particle technology for automotive industry
Especially in the field of automotive industry the application of modern particle measuring technology is essential in the domains of quality control and ...
By Palas GmbH Distributor in Bangalore, INDIA.
-
Laser based remote sensing instruments for remote visibility / fog applications
Aerosol LIDARs can provide visibility measurement, including Slant Visual Range (SVR - visibility up the glide slope), Runway Visual Range (RVR), and Vertical Optical Range (VOR - visibility at the decision point). LIDARs offer remote detection, augmenting current sensors wherever visibility is an issue, including for airports, ports, and oil platforms. Using the same principle, they are also capable of detecting incoming ...
By Raymetrics S.A. Distributor in ISRAEL.
-
Aerosol Measurement Solutions for Ambient Monitoring
In urban environment the number of aerosol particles changes fast. The mass based measurements do not provide information about these fast temporal variations. Especially since most of the particles are ultrafine ones. Ultrafine particles might not contribute remarkably to the mass, but are important with respect to health ...
By Airmodus Oy Distributor in Shanghai, CHINA.
-
Cloud and Aerosol Instrument for Cloud physics research industry
Clouds are an integral part of the atmosphere, critical components of the hydrological cycle, and a major modifier of climate. Clouds form and develop in complex ways that depend on the characteristics of the ambient aerosol population and on the thermodynamic and dynamic structure of the atmosphere. The hydrologic cycle depends on the formation of precipitation that in turn is directly related to the microphysical properties of clouds. The accuracy of weather forecasting and climate simulations are dependent on ...
By Droplet Measurement Technologies (DMT) Distributor in INDIA.
-
Cloud and Aerosol Instrument for Weather modification research idustry
As climate change continues to impact cloud formation and development, weather modification efforts worldwide are working to enhance precipitation (e.g., rain and snow) and mitigate hail. To effectively introduce “seeding” material into clouds, you need detailed and accurate information on cloud properties that are particular to a given region and season. In order to know when and where to seed clouds, it’s critical to understand specific aerosol and cloud ...
By Droplet Measurement Technologies (DMT) Distributor in INDIA.
-
Cloud and Aerosol Instrument for Pollution characterization industry
Air quality and pollution are global issues. Air pollution can come from natural and anthropogenic sources, posing detrimental effects to both human health and the environment. Because short- and long-term exposure to air pollution has been associated with a wide range of human health effects and environmental threats, it is important to determine the source and transportation of pollution and ...
By Droplet Measurement Technologies (DMT) Distributor in INDIA.
-
Carbonaceous Aerosol Measurement Instruments for Black Carbon Car Emission Factors
One of the main sources of air pollution is traffic. To estimate the traffic contribution to air pollution the emissions are calculated from the vehicle fleet composition and vehicle emission factors (EF). Since the emission factors depend on vehicle type (cars, heavy and light duty), engine maintenance, driving environment (city, highway, regional roads) and weather, the emmision factors must be measured for in-use vehicles in actual traffic ...
By Magee Scientific Company Distributor in Delhi, INDIA.
-
Cloud and Aerosol Instrument for Bioaerosols research industry
Bioaerosols are everywhere in the atmosphere, and they have a significant impact on both the environment and human health – including allergies and the transmission of disease. Because bioaerosols can cause agricultural decline, they also have critical economic implications for our ...
By Droplet Measurement Technologies (DMT) Distributor in INDIA.
-
Cloud and Aerosol Instrument for Climate models & radiative forcing industry
In 1996, the first Intergovernmental Panel on Climate Change (IPCC) issued a report that underscored how aerosols and clouds impact radiative fluxes and modulate climate. Their first report and all subsequent reports every seven years have emphasized how the level of scientific understanding (LOSU) remains low. This major gap in our understanding of how aerosols and clouds alter climate continues to drive the need for more widespread and accurate measurements, especially of black carbon (BC) aerosols that ...
By Droplet Measurement Technologies (DMT) Distributor in INDIA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you