Aerosol Monitoring Equipment For Monitoring And Testing Available In Canada
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD III Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide. Sampling gases at pressures greater than sea level, such as 25 – 100 psi, is challenging for particle counters. Connecting pressurized air or gas to a particle counter can defeat its flowmetering system and possibly damage the ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The flexible system with ultimate sensitivity and targeted performance optimization using various accessories for advanced research: Ultimate freedom of optimization through full ion focus control. Shortest dwell time and best mass separation. Flexible connection of accessories using two entry ports to the plasma compartment. ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Heating jacket for heating the Dekati® Cyclone up to 450 ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati Oxidation Flow Reactor, DOFR, is a unique, all-in-one solution combining sample conditioning and an oxidation flow reactor for secondary aerosol (SA) formation ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The ParticleSeeker is a 10-port smart manifold companion to the NanoAir™ aerosol nanoparticle counter. The ParticleSeeker is a 10-port smart manifold companion to the NanoAir 10 aerosol nanoparticle counter. Designed specifically for use in the most critical fab spaces, it is available for use in applications that require multiple sample locations to be monitored in a sequential or ...
-
PremiumManufactured by ENVEAbased in FRANCE
The CairClip (USB version) was initially developed for the real-time measurement of pollutants and survey the effect on people suffering from respiratory conditions. The various health and safety management systems in the workplace now requiring more and more the evaluation and the traceability of the workers chronic exposure to risks the CairClip was further developed to measure and to follow-up ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
N1312 is intended for use as ELPI®+ spare impactor only. For existing users, please inform the serial number of the ELPI+ together with the purchase ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eFilter is a unique instrument that combines a standard gravimetric filter holder and sensitive real-time PM detection in one compact instrument. The Dekati eFilter assembly includes a standard gravimetric filter holder that is used to determine gravimetric mass of particles in the ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
The Alpha and Beta aerosol beacon, BAB A7, is specially designed for work station monitoring during maintenance operations or in dismantling work sites, where man-made noise immunity is highly recommended. ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The new Dekati MPEC+ (Mobile Particle Emission Counter) is a compact and portable instrument for easy onboard PN-PEMS measurements. At the core of the MPEC+ is the patented Dekati ePNC particle counting technology, which has been further optimized for fast transient emission measurements. The MPEC+ is the device of choice for highly accurate PN-PEMS testing in accordance with RDE requirements. ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
The Quantitative Aerosol Generator (QAG) creates an aerosol of known concentration by nebulizing a solution. The resulting droplets are carried out of generation area to a drying chamber where they are dried to salt particles. Depending on the application for the salt particles the size can be varied to a number mean between 0.1 and 2 µm in diameter. The aerosol exiting the drying chamber ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be limited by ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Diluter DI-1000 is an easy-to-operate and reliable dilution device for diluting aerosol and gaseous samples from any ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The AeroFid-100 tests up to 120 cans per minute at a footprint of less than 1 sqare meter. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample at a time from the head and valve area of each ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The AeroFid-60 tests up to 80 cans per minute. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample at a time from the head and valve area of each individual aerosol can. The cans freely scroll ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Teflon filter (50 filters), 2 μm, Ø47 mm. Incl. 50 filters for gravimetric ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The AeroFid-200 tests up to 250 cans per minute also at a footprint of less than 1 sqare meter. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample at a time from the head and valve area of ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model 108 dilutes an introduced sample gas in a 1:10 (standard), or a 1:100 (optional) dilution rate to allow the linear measurement of hydrocarbon concentrations above several thousand ppm up to 10% and above. The sample injection method is used in this 190 deg.C heated sample diluter for fast response and improved zero and span stability of a hydrocarbon measurements. The Model 108 is also ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
EMFAB filter, TX40 (100 filters), Ø47 mm. Incl. 100 filters for gravimetric ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you