Aerosol Monitoring Equipment For Monitoring And Testing Available In Ontario
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The robust system for efficient and stable characterization of high matrix samples: Outstanding plasma robustness for high matrices. Minimized drift at changing matrix load. Efficient interference management with outstanding ease of use. ...
-
PremiumManufactured by ENVEAbased in FRANCE
The CairClip (USB version) was initially developed for the real-time measurement of pollutants and survey the effect on people suffering from respiratory conditions. The various health and safety management systems in the workplace now requiring more and more the evaluation and the traceability of the workers chronic exposure to risks the CairClip was further developed to measure and to follow-up ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum size of particulate matter (PM) can be limited by ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Set of 2 blocks, Set of 5 ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Teflon filter (50 filters), 2 μm, Ø47 mm. Incl. 50 filters for gravimetric ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
EMFAB filter, TX40 (100 filters), Ø47 mm. Incl. 100 filters for gravimetric ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The flexible system with ultimate sensitivity and targeted performance optimization using various accessories for advanced research: Ultimate freedom of optimization through full ion focus control. Shortest dwell time and best mass separation. Flexible connection of accessories using two entry ports to the plasma compartment. ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and it features a built in “low noise” blower together with ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The ParticleSeeker is a 10-port smart manifold companion to the NanoAir™ aerosol nanoparticle counter. The ParticleSeeker is a 10-port smart manifold companion to the NanoAir 10 aerosol nanoparticle counter. Designed specifically for use in the most critical fab spaces, it is available for use in applications that require multiple sample locations to be monitored in a sequential or ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
N1312 is intended for use as ELPI®+ spare impactor only. For existing users, please inform the serial number of the ELPI+ together with the purchase ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eDiluter Pro 1200C is a modified version of the eDiluter Pro dilution system specifically designed for particle measurements from extreme temperatures such as measurements directly from a combustion zone or flame. The eDiluter Pro 1200C includes the standard eDiluter Pro unit combined with the Dekati High Temperature Sampling probe that enables particle sampling from up to 1200 °C. ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
This genereal purpose aerosol lubricant eliminates the effect of friction on equipment that squeaks, sticks or binds. Silicone Lube is made with reacted grade silicone to offer superior lubrication on machiner like gears, locks, hinges and more. This product is also formulated with fast drying solvets to prevent and seal out ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of analyses and ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
TSP Inlet for ambient air ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Engine Exhaust Diluter DEED is an engine exhaust conditioning system that fulfills all requirements and recommendations set forth by EURO 6 legislation for a VPR (Volatile Particle ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model 108 dilutes an introduced sample gas in a 1:10 (standard), or a 1:100 (optional) dilution rate to allow the linear measurement of hydrocarbon concentrations above several thousand ppm up to 10% and above. The sample injection method is used in this 190 deg.C heated sample diluter for fast response and improved zero and span stability of a hydrocarbon measurements. The Model 108 is also ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Axial Diluter DAD is a simple and cost-effective dilution tool that can be used as a stand-alone unit or as a part of other aerosol sampling and dilution systems. The DAD is especially designed for use with Dekati Fine Particle Measurement Instruments and applications where low consumption of dilution air is a requirement. The Dekati Axial Diluter is made of stainless steel which ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
PM10/PM2.5 inlets for ambient air measurements. EN 12341 PM10 inlet downscaled to 30 lpm. PM2.5 inlet, 30 ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrohm AeRosol Sampler "MARS" is a simpler solution for aerosol monitoring. The MARS can be used as a preconditioning unit for various analytical applications under ambient conditions or in industrial environments. No sample storage is required. ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The AeroFid-200 tests up to 250 cans per minute also at a footprint of less than 1 sqare meter. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample at a time from the head and valve area of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you